You can run GUI Programs on HiPerGator, but running such applications on a remote server within a supercomputer and displaying them on your local client computer is not as easy as simply running them locally. We try to make the process as smooth as possible. However, we welcome and will listen to feedback. The most difficult part is making sure a remotely running program can be displayed on your local computer as if it were running there and making the interface sufficiently responsive, so you could do your work. We accomplish this task with Xpra software - an open-source multi-platform persistent remote display server and client for forwarding applications and desktop screens. You can read the original basic usage documentation and the full Xpra manual if necessary.

Install Xpra Software on Client Computer

Since Xpra is required on both ends of the connection you will have to have it installed on your local computer. Xpra client installation depends on the operating system running on your local machine and may require assistance of a system administrator if you do not have the authority to install new software. Once Xpra is installed on your client computer feel free to skip this step. Installation instructions are specific to the operating system running on your local computer:

Windows

MacOS X

Linux.

Start a GUI session on HiPerGator

Single command, no job script

There are two classes of applications that can be started with just one command from the gui environment module and do not require you to provide a job script.

Preset applications

To list applications presets load the gui module and run launch_gui_session -l

module load gui
launch_gui_session -l

To launch a pre-approved application:

Load the gui module if not already loaded

module load gui

Launch the application

launch_<application>_gui

For example:

launch_mzmine_gui

or

launch_rstudio_gui

See a full example on the RSTudio Help Page.

Simple applications

If you want to run a simple application in which the environment module name matches the name of the program you want to run it's just as simple as launching a preset application

module load gui
launch_gui_session -e <application>

For example

launch_gui_session -e molden

Provided Job Script

If you need to pass custom arguments to the application, load pre-requisite environment modules and so on you can provide a simple script (linux format text file) with the required commands as an argument to launch_gui_session.

Make sure to prepend the command that starts the program with xpra_start. For example, a following job script named my_molden.sh will use the molden/5.0 environment module and start molden with a particular model file:

module load molden/5.0
xpra_start 'molden /ufrc/data/tests/molden/boc-iso-1t.gjf'

Now, to launch molden with the above script run

launch_gui_session -e molden -f my_molden.sh

Manual launch

Of course, if you prefer to talk directly to SLURM you can write a full job script complete with resource requirements, job name, output file, etc in the #SBATCH section you can submit the script to SLURM manually.

Make sure you use the gui partition

#SBATCH --partition=gui

and wrap your command with xpra_start as shown above.

You can use a job script for one of the application presets found in the '$HPC_GUI_JOB' directory once the 'gui' environment module is loaded as the base of your own job script.

List Xpra Sessions

If you performed a manual launch or used the '-w' argument to the automated launcher command you'll have to manually check on your gui job. Check the job status with 'squeue -u $USER'. When the job starts you have to list the available xpra sessions using xpra_list_sessions command in the gui module. This command will refresh the Xpra session list and provide a convenient list of live Xpra sessions as well as client commands that can be copied and pasted into a terminal on the client machine.

Example

$ module load gui
$ xpra_list_sessions

Output:

Refreshing the session list for jdoe to remove stale sessions

List of active Xpra sessions for jdoe:

Session: i111a-s222.rc.ufl.edu:3713
    Job ID: 123456, Name: RStudio
    Client command:
         xpra attach ssh:jdoe@i111a-s222.rc.ufl.edu:3713
        or (downloaded script):
         ./xpra attach ssh:jdoe@i111a-s222.rc.ufl.edu:3713

See the respective application pages for details and sample job scripts.

Connect From a Client Computer

Click [expand] on the right side of a section to open that section.

Connecting from outside of UF campus via VPN

The servers in SLURM gui partition are accessible only within the UF campus network. If you are working off campus, you will need to use the VPN to connect to the UF campus network using AnyConnect VPN or similar software. Please see: https://vpn.ufl.edu for additional information.

Connecting from Linux

In the simplest case paste the client command presented by the launcher or from the xpra_list_sessions output into a terminal.

Manual syntax: $USERNAME is your UF GatorLink username, $SERVERNAME is the GUI server address, and $PORT is the X11 port.

xpra attach ssh:$USERNAME@$SERVERNAME:$PORT

Example: testuser@jr-physics:~$ xpra attach ssh:testuser@i21a-s3.rc.ufl.edu:143 --desktop-scaling=on --dpi=96

Note: if you close the application window using the close button in the top right (or left) corner, this will exit your application and terminate your SLURM gui session. Use 'Ctrl+c' key combination in the terminal windows where you ran the xpra attach command to disconnect the session if you plan to reconnect later.

Connecting from MacOS X

Simply execute the xpra shell script you downloaded during client software installation. If not installed, change into the Xpra installation directory before running Xpra executable.

cd /Applications/Xpra.app/Contents/MacOS

Use the client command provided by 'xpra_list_sessions' to connect while adding any local options you need to improve the viewing experience like

Desktop scaling: --desktop-scaling=on
Resolution, dpi (dots per inch): --dpi=96

Example:

./Xpra attach ssh:test-user@i21a-s3.rc.ufl.edu:143 --desktop-scaling=on --dpi=96

or with the wrapper script in place

xpra attach ssh:test-user@i21a-s3.rc.ufl.edu:143 --desktop-scaling=on --dpi=96

Once the GUI application windows is displayed on your local computer if you close the window using the close button both the application and SLURM gui session will close. If you want to simply detach the session and come back later click on the terminal window where you ran the client command and use the 'Ctrl+c' key combination to detach the session.

Connecting from Microsoft Windows

Navigate to the install location of xpra (normally C:\Program Files (x86)\Xpra\).

In MobaXterm

cd "/drives/c/Program\ Files\ \(x86\)/Xpra/"

Alternatively, call the xpra shell script you downloaded during client software installation.

Example

./xpra attach ssh:test-user@i21a-s3.rc.ufl.edu:143 --desktop-scaling=on --dpi=96