Difference between revisions of "Globus"

From UFRC
Jump to navigation Jump to search
 
(43 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
[[Category:Software]][[Category:Data Management]]
+
[[Category:Software]][[Category:File Management]]
 +
{|align=right
 +
  |__TOC__
 +
  |}
 
[https://www.globus.org/ Globus] is an easy-to-use, high-performance data transfer tool developed by the Computation Institute, the University of Chicago and Argonne National Laboratory. UF Research Computing has deployed Globus as one mechanism to facilitate data transfer to and from HiPerGator.
 
[https://www.globus.org/ Globus] is an easy-to-use, high-performance data transfer tool developed by the Computation Institute, the University of Chicago and Argonne National Laboratory. UF Research Computing has deployed Globus as one mechanism to facilitate data transfer to and from HiPerGator.
  
 
Globus uses a grid-FTP network which uses the power of multiple servers to simultaneously transfer data.
 
Globus uses a grid-FTP network which uses the power of multiple servers to simultaneously transfer data.
  
 +
UFRC maintains a managed Globus setup with multiple servers for the highest available bandwidth and filesystem throughput. The HPG managed endpoint is 'UFRC HiperGator'
 +
 +
[[File:Globus_v5_hpg_collection.png]]
 
= Getting Started =
 
= Getting Started =
 +
{{Note|At this time federated users can only upload data to HPG if a UF-based user creates a writable guest collection for them|warn}}
 
==Getting a Globus Account==
 
==Getting a Globus Account==
−
Globus will redirect you to UF GatorLink authentication when you log into [https://globus.org Globus.org]. If you created your globus.org account before Globus started using the new authentication you'll need to [https://docs.globus.org/how-to/link-to-existing/ link] your old globus @globusid.org account with your @ufl.edu account.  
+
Globus will redirect you to UF GatorLink authentication when you log into [https://globus.org Globus.org]. If you created your globus.org account before Globus started using the new authentication you'll need to [https://docs.globus.org/how-to/link-to-existing/ link] your old globus @globusid.org account with your @ufl.edu account.
 +
 
 +
==Sharing Data: Quick Start==
 +
[[Image:compactglobus.png | frameless | right | upright=1.25]]
 +
If you just want to know how to share a directory on one of the HPG filesystems here is a very brief procedure:
 +
* Go to [https://globus.org https://globus.org] and log in with your GatorLink credentials after choosing 'University of Florida' as the authentication provider.
 +
* Type or paste 'UFRC HiPerGator' into the collection search box.
 +
* Type or paste the shortest path to the directory tree you want to be in E.g. '/blue/mygroup' or '/orange/mygroup' or the full path to the directory you want to share. You may have to give the 'Globus Application' permission to access files in your browser at this point.
 +
* Browse into the directory you want to share if you didn't paste the full path above.
 +
* Click on the 'Share' menu item.
 +
* Give the share a name and click on 'Create Collection'. A 'Shared Collection' is now set up, but nobody except you has access, yet! If you're having issues creating a collection, use the following link to proceed: [https://app.globus.org/file-manager/collections/5dbaf795-8a7e-4dca-91aa-6e10d610c2b3/shares?filter=%5B%5D Create New Collection].
 +
'''Note:''' Everyone you want to give permission via globus has to log into Globus first, so their Globus account would get created and they could tell you their globus identity (username).
 +
* To give globus users permissions to read or write to that directory click on 'Permissions' > 'Add Permissions - Share With' icon and search for or type/paste a globus username.
 +
* Choose Read, Write, or both for the permission as appropriate.
 +
* Add a message that will be sent to the target user by email if you want.
 +
* Click on 'Add Permission' button.
 +
''Do not change the path or switch from 'user - share with specific individuals'. If there is a 'Globus' group (we have to set up one if you really need multiple users in a single group) in existence then you can use a group. Otherwise, do the sharing with particular globus users, which are not necessarily HiPerGator users, so don't confuse Globus users/groups with HPG users/groups.
 +
 
 +
That's all!
 +
 
 +
=Transferring Data=
 +
For extended instructions on transferring data using Globus, view instructions at [[Transfer Data with Globus]]
 +
 
 +
==Introduction==
 +
A Globus transfer happens between two ''endpoints'' or a source and a target of a transfer. From the point of view of a user transferring data the endpoints are generally called 'Collections'. There are two levels of collections. One level defines a particular globus setup and is asociated with a computing resource such as a server, cluster, storage system, desktop, laptop, or other system globus is installed on. For example HiPerGator Globus set up has a 'Managed Collection' called 'UFRC HiPerGator' that allows you access to HPG filesystems you are authorized to access. An install of Globus Connect Personal on your laptop or desktop, on the other hand, would require setting up a 'Personal Collection' and giving it a name that can be searched for in the globus interface on [https://globus.org https://globus.org]. Since a personal system is only for your use the 'Personal Collection' is all you set up in a GCP install. However, under a 'Managed Collection' like 'UFRC HiPerGator' every user can set many 'Guest Collection' instances on their filesystem directories. The guest collections become endpoints for data transfers whether for you or for other globus users you give read or write access to.
 +
 
 +
==UF Research Computing Globus Setup==
 +
We manage a multi-server high-throughput Globus install on HiPerGator under the umbrella of a managed Globus collection named 'UFRC HiPerGator' that allows you to transfer data right away or to set up any number of guest collections on your directories in /home, /blue, and /orange filesystems. The 'UFRC HiPerGator' collection can be found by searching within the Globus File Explorer interface on [https://globus.org https://globus.org].
  
−
==UFRC Globus Group==
+
A valid HiPerGator user account is required to access 'UFRC HiPerGator' collection directly. However,  any globus user you authorized to access a guest collection created under 'UFRC HiPerGator' can transfer data to or from that shared collection without having a HPG account as they are identified by their globus ID that you gave a permission to access a guest collection to.  
−
To be able to create shared end-points (see below) on your local computer you will need to have Globus Plus User status. To obtain that status please log into the [https://www.globus.org Globus Interface], click on ''Groups'' menu at the top and select ''Search For Groups''. Search for 'University of Florida Research Computing' and access request to the group. Once approved, you will have Globus Plus User status when running 'Globus Connect Personal' software on your local computer.
 
  
−
==Globus Endpoints==
+
If you do not have a Research Computing account, you may [http://www.rc.ufl.edu/help/account-request/ request one here]. Please note that your username and password to activate 'UFRC HiPerGator' collection are your GatorLink credentials. At this time Federated Users cannot directly access the 'UFRC HiPerGator' collection. If you are having problems with your password, please submit a support request through the [http://helpdesk.ufl.edu/ UF Computing Help Desk] or visit [https://account.it.ufl.edu/ https://account.it.ufl.edu/] for self-service e.g. to reset your GatorLink password.
−
Globus transfers files between two ''endpoints''. An endpoint is one of the two file transfer locations – either the source or the destination – between which files can move. Once a resource (server, cluster, storage system, laptop, or other system) is defined as an endpoint, it will be available to authorized users who can transfer files to or from this endpoint.
 
  
−
Globus endpoints are named using the following format: <globus-online-username>#<endpoint-name>. For example, Research Computing has an account under the username "ufrc" and so it's endpoint is named ufrc#go. Likewise, an individual that has a Globus account under the username "maxim" might have a personal endpoint called maxim#mylaptop.
+
==Globus Connect Personal==
 +
Globus provides users with [https://www.globus.org/globus-connect-personal Globus Connect Personal] software they can use to set up a personal collection on their computing device (Windows, MacOS, Linux) for the purpose of performing data transfers from or to that device.
  
−
===UF Research Computing Endpoint===
+
You will be asked to name a personal globus shared collection while instaling GCP. Once created, that collection can be found by name when searching within the Globus File Explorer interface on [https://globus.org https://globus.org]. Once run, GCP allows you to configure which directories on your personal device it has access to and what kind of access. Initially, only you can transfer data to or from a personal computing device running GCP. However, if you are a 'Globus Plus' user status, which all University of Florida members already have because UFRC has a Globus License, you can give access to your  personal collection on your personal computing device running GCP to other Globus users by creating Shared Collections the way you would do it with a guest collection on HPG. Be very careful here to avoid mistakes while giving other people access to files on your personal computing device using this functionality. See [https://globus.stanford.edu/client/plus.html Client Plus] for a nice write-up on this functionality.
−
ufrc#hpg2 -- The primary Globus endpoint for /home and /ufrc filesystems.
 
−
 
−
A valid UF Research Computing account is required to access this endpoint. If you do not have a Research Computing account, you may [http://www.rc.ufl.edu/help/account-request/ request one here]. Please note that your username to activate a Globus endpoint is the same as the GatorLink username, and the password is the same as your GatorLink password. If you are having problems with your password, please submit a support request through the [http://helpdesk.ufl.edu/ UF Computing Help Desk].
 
  
−
+
Once GCP is running and configured you will use the Globus File Explorer interface at [https://globus.org https://globus.org] for making transfers using your personal collection presented by the GCP instance on your device. Think of GCP as a personal 'Globus Server' and https://globus.org as the interface for making transfers.
−
===Shared Endpoints===
 
−
UFRC users have Globus Plus user status, so they are able to create ''shared'' endpoints, which do not require a Research Computing account to connect to. In this mode Globus acts as a secure high-performance equivalent of the Dropbox and other similar services. See [https://docs.globus.org/how-to/share-files/ Globus Sharing documentation] to learn how to create shared endpoints in ''just a few seconds''.
 
  
−
==Transferring Data Between Endpoints==
+
===Automation===
−
To transfer data between two endpoints, log in to your account at [https://globus.org Globus.org]. In the Quick Links drop down, select Transfer Files. Enter the endpoint information and, if needed, authentication information for each endpoint. The example below, shows settings for a transfer between ufrc#go and the FSU Research Computing endpoint fsurc#lustre
+
You can automate Globus transfers to avoid having to run GCP personally. See [https://docs.globus.org/how-to/automate-with-service-account/ https://docs.globus.org/how-to/automate-with-service-account/] for details. Let us know if you run into any issues.
−
[[File:Globus transfer.png|thumbnail]]
 
  
−
After authenticating at both endpoints, navigate to the folder and select the files to transfer and click the arrow corresponding to the direction of the transfer. The transfer will be scheduled and you will receive an email when the transfer has completed.
+
===UFRC Globus Group===
 +
'''Note'''<nowiki>:</nowiki> this step is not needed if you are only creating and using guest collections created under a managed 'UFRC HiPerGator' collection! This is only needed for creating shared collections on your personal computing device running GCP!
  
−
==Advanced Transfer Options ==
+
To be able to create shared end-points (see below) on your local computer running GCP, if the transfer will be made to a '''non-managed endpoint''' e.g. another local computer with a personal end-point and you are not a University of Florida member you need to have Globus Plus User status. To obtain that status please log into the [https://www.globus.org Globus Interface], click on ''Groups'' menu at the top and select ''Search For Groups''. Search for 'University of Florida Research Computing' and access request to the group. Once approved, you will have Globus Plus User status when running 'Globus Connect Personal' software on your local computer.
−
At the bottom of the transfer window, click the More Options link. The drop down will display advanced transfer options. Many of these are useful for file synchronization. There is also an option to encrypt the data transfer, an important option for sensitive data.
 
  
−
==Globus Connect Personal==
+
Direct link to the groups form: [https://app.globus.org/groups https://app.globus.org/groups]
−
It is possible to transfer data to and from your own computer using the [https://www.globus.org/globus-connect-personal Globus Connect Personal Client]. Select Manage Endpoints from the Manage Data drop down, and click the add Globus Connect Personal. Name the endpoint and click the Generate Setup Key. Copy that key. Download and start the install process for the client for your operating system. When prompted, paste the Setup Key into the installation box.
 
  
−
To transfer data to and from your computer, the Globus Connect Personal client must be running. Select it as one of the endpoints for your transfer.
+
===Globus CLI===
 +
If you need to initiate Globus transfers from the command line e.g. as a part of a workflow you may want to use the [https://docs.globus.org/cli/ Globus Command-Line Interface (CLI)]. However, before you can initiate globus transfers with the Globus CLI on a given computer, you will have to log in to Globus using the <code>globus login</code> command. If you're in an X11 environment a web browser will be started for you to perform authentication. This happens if you're, for example, are in a terminal in OnDemand console or desktop session and run
 +
$ module load globus
 +
$ globus login
  
−
==Additional information==
+
If you're in a 'headless' environment where GUI programs cannot run use the --no-local-server argument.
−
For additional support information, please see the [https://support.globus.org/home Globus Support Site], especially the [https://docs.globus.org/how-to/ How To Guides] and [https://docs.globus.org/faq/ FAQs].
 
  
−
==Transfer Scenarios==
+
Example:
−
Let's consider a few hypothetical transfer of data scenarios. In cases involving more than one user it's necessary to know the Globus username of the remote user.
 
  
−
===Managed End-Point Transfer between UFRC and a remote site===
+
<pre>
−
Scenario 1: RCUser has an account at the remote site.
+
$ globus login --no-local-server
−
* RCUser logs into [https://www.globus.org/app/transfer Globus]
+
Please log into Globus here:
−
* RCUser authenticates against managed endpoints on both ends like <code>ufrc#hpg2</code> for /ufrc at UFRC.
+
---------------------------
−
* RCUser starts a transfer
+
https://auth.globus.org/v2/oauth2/authorize?code_challenge=0dlql_6KJbguIncy3-NH
 +
0w8oBOXABa7DqvZ2O2K4bGs&state=_default&redirect_uri=https%3A%2F%2Fauth.globus.o
 +
rg%2Fv2%2Fweb%2Fauth-code&prefill_named_grant=login3.stampede2.tacc.utexas.edu&
 +
response_type=code&client_id=95fdeba8-fac2-42bd-a357-e068d82ff78e&scope=openid+
 +
profile+email+urn%3Aglobus%3Aauth%3Ascope%3Atransfer.api.globus.org%3Aall&code_
 +
challenge_method=S256&access_type=offline
 +
---------------------------
  
−
Scenario 2: RCUser does not have a remote account. There is a collaborator (RemoteUser) on the other end. Remote site '''has''' a Globus Subscription.
+
Enter the resulting Authorization Code here:
−
;Transfer from UF to a Remote Site
+
</pre>
−
* Remote_User logs into [https://www.globus.org/app/transfer Globus] and creates a shared Globus end-point (shared directory) on their storage
 
−
and gives write access to the RCUser
 
−
* RCUser logs into [https://www.globus.org/app/transfer Globus]
 
−
* RCUser authenticates against <code>ufrc#hpg2</code> for /ufrc at UFRC and against the shared end-point on the remote end.
 
−
* RCUser starts a transfer
 
  
−
Scenario 3: RCUser does not have a remote account. There is a collaborator (RemoteUser) on the other end. Remote site '''does not''' have a Globus Subscription.
+
Copy the URL from the shell and visit that web page in a web browser on any computer. If you are not currently logged in to Globus on that computer, you will be asked to log in at this time. You may log in with your Globus ID or an ID from any organization, such as University of Florida.
−
;Transfer from UF to a Remote Site
 
−
* RCUser logs into [https://www.globus.org/app/transfer Globus] and creates a shared Globus end-point (shared directory) within <code>ufrc#hpg2</code> and
 
−
and gives read access to the Remote_User.
 
−
* Remote_User logs into [https://www.globus.org/app/transfer Globus]
 
−
* Remote_User authenticates against the managed end-point on the remote end and against the shared end-point created by RCUser.
 
−
* Remote_User starts a transfer
 
  
−
;Note:
+
You will be taken to a page where an authorization code is displayed. Copy the code to your computer's clipboard.
−
To transfer from a remote site to UFRC reverse the sequence in scenarios 2 and 3.
 
  
−
==Personal End-Point Transfers==
+
Paste the authorization code into the shell where you ran the "globus login --no-local-server" command, as a response to its prompt.
−
Since UFRC has a Globus Subscription our users who requested access to the "University of Florida Research Computing" Globus group can create Shared End-Points using [https://www.globus.org/globus-connect-personal Globus Connect Personal] running a local computer instead of within <code>ufrc#hpg2</code> managed end-point at UFRC. The following scenarios are useful when transferring data not hosted on HiPerGator.
+
<pre>
 +
Enter the resulting Authorization Code here: 1zIOeE6leaZpnk0Fxfmi1J8UauARmF
  
−
Scenario 1: RCUser receives data from a Remote User at an external entity, which '''does not''' have a Globus Subscription
+
You have successfully logged in to the Globus CLI as johnqpublic@globusid.org
−
* RCUser runs [https://www.globus.org/globus-connect-personal Globus Connect Personal]
 
−
* RCUser creates a shared end-point on the local desktop pointing either to internal or attached (e.g. USB Drive) storage and gives write access to the Remote User.
 
−
* Remote User either logs into [https://www.globus.org/app/transfer Globus] and authenticates against their managed end-point or a local end-point created with [https://www.globus.org/globus-connect-personal Globus Connect Personal] as well as against the shared end-point created by RCUser.
 
−
* Remote User transfers data to RCUser's shared end-point.
 
  
−
Scenario 2: RCUser receives data from a Remote User at an external entity, which '''has''' have a Globus Subscription or Globus Plus User status.
+
You can always check your current identity with
−
* Remote User either logs into [https://www.globus.org/app/transfer Globus] and authenticates against their managed end-point or a local end-point created with [https://www.globus.org/globus-connect-personal Globus Connect Personal].
+
  globus whoami
−
* Remote User creates a shared end-point on their end and gives ''read'' access to RCUser.
 
−
* RCUser runs [https://www.globus.org/globus-connect-personal Globus Connect Personal] and creates a local end-point on the local computer pointing either to internal or attached (e.g. USB Drive) storage.
 
−
* RCUser logs into [https://www.globus.org/app/transfer Globus] and authenticates against their local end-point created with [https://www.globus.org/globus-connect-personal Globus Connect Personal] and against the remote shared end-point created by Remote User.
 
−
* RCUser transfers data to RCUser's local end-point.
 
  
−
Reverse the scenarios for transfers from a local end-point to a remote end-point.
+
Logout of the Globus CLI with
 +
  globus logout
 +
</pre>
 +
You will now be able to issue Globus CLI commands on this computer. You can check your Globus login status at any time with the command <code>globus whoami</code>.

Latest revision as of 14:14, 31 January 2024

Globus is an easy-to-use, high-performance data transfer tool developed by the Computation Institute, the University of Chicago and Argonne National Laboratory. UF Research Computing has deployed Globus as one mechanism to facilitate data transfer to and from HiPerGator.

Globus uses a grid-FTP network which uses the power of multiple servers to simultaneously transfer data.

UFRC maintains a managed Globus setup with multiple servers for the highest available bandwidth and filesystem throughput. The HPG managed endpoint is 'UFRC HiperGator'

Globus v5 hpg collection.png

Getting Started

At this time federated users can only upload data to HPG if a UF-based user creates a writable guest collection for them

Getting a Globus Account

Globus will redirect you to UF GatorLink authentication when you log into Globus.org. If you created your globus.org account before Globus started using the new authentication you'll need to link your old globus @globusid.org account with your @ufl.edu account.

Sharing Data: Quick Start

Compactglobus.png

If you just want to know how to share a directory on one of the HPG filesystems here is a very brief procedure:

  • Go to https://globus.org and log in with your GatorLink credentials after choosing 'University of Florida' as the authentication provider.
  • Type or paste 'UFRC HiPerGator' into the collection search box.
  • Type or paste the shortest path to the directory tree you want to be in E.g. '/blue/mygroup' or '/orange/mygroup' or the full path to the directory you want to share. You may have to give the 'Globus Application' permission to access files in your browser at this point.
  • Browse into the directory you want to share if you didn't paste the full path above.
  • Click on the 'Share' menu item.
  • Give the share a name and click on 'Create Collection'. A 'Shared Collection' is now set up, but nobody except you has access, yet! If you're having issues creating a collection, use the following link to proceed: Create New Collection.

Note: Everyone you want to give permission via globus has to log into Globus first, so their Globus account would get created and they could tell you their globus identity (username).

  • To give globus users permissions to read or write to that directory click on 'Permissions' > 'Add Permissions - Share With' icon and search for or type/paste a globus username.
  • Choose Read, Write, or both for the permission as appropriate.
  • Add a message that will be sent to the target user by email if you want.
  • Click on 'Add Permission' button.

Do not change the path or switch from 'user - share with specific individuals'. If there is a 'Globus' group (we have to set up one if you really need multiple users in a single group) in existence then you can use a group. Otherwise, do the sharing with particular globus users, which are not necessarily HiPerGator users, so don't confuse Globus users/groups with HPG users/groups.

That's all!

Transferring Data

For extended instructions on transferring data using Globus, view instructions at Transfer Data with Globus

Introduction

A Globus transfer happens between two endpoints or a source and a target of a transfer. From the point of view of a user transferring data the endpoints are generally called 'Collections'. There are two levels of collections. One level defines a particular globus setup and is asociated with a computing resource such as a server, cluster, storage system, desktop, laptop, or other system globus is installed on. For example HiPerGator Globus set up has a 'Managed Collection' called 'UFRC HiPerGator' that allows you access to HPG filesystems you are authorized to access. An install of Globus Connect Personal on your laptop or desktop, on the other hand, would require setting up a 'Personal Collection' and giving it a name that can be searched for in the globus interface on https://globus.org. Since a personal system is only for your use the 'Personal Collection' is all you set up in a GCP install. However, under a 'Managed Collection' like 'UFRC HiPerGator' every user can set many 'Guest Collection' instances on their filesystem directories. The guest collections become endpoints for data transfers whether for you or for other globus users you give read or write access to.

UF Research Computing Globus Setup

We manage a multi-server high-throughput Globus install on HiPerGator under the umbrella of a managed Globus collection named 'UFRC HiPerGator' that allows you to transfer data right away or to set up any number of guest collections on your directories in /home, /blue, and /orange filesystems. The 'UFRC HiPerGator' collection can be found by searching within the Globus File Explorer interface on https://globus.org.

A valid HiPerGator user account is required to access 'UFRC HiPerGator' collection directly. However, any globus user you authorized to access a guest collection created under 'UFRC HiPerGator' can transfer data to or from that shared collection without having a HPG account as they are identified by their globus ID that you gave a permission to access a guest collection to.

If you do not have a Research Computing account, you may request one here. Please note that your username and password to activate 'UFRC HiPerGator' collection are your GatorLink credentials. At this time Federated Users cannot directly access the 'UFRC HiPerGator' collection. If you are having problems with your password, please submit a support request through the UF Computing Help Desk or visit https://account.it.ufl.edu/ for self-service e.g. to reset your GatorLink password.

Globus Connect Personal

Globus provides users with Globus Connect Personal software they can use to set up a personal collection on their computing device (Windows, MacOS, Linux) for the purpose of performing data transfers from or to that device.

You will be asked to name a personal globus shared collection while instaling GCP. Once created, that collection can be found by name when searching within the Globus File Explorer interface on https://globus.org. Once run, GCP allows you to configure which directories on your personal device it has access to and what kind of access. Initially, only you can transfer data to or from a personal computing device running GCP. However, if you are a 'Globus Plus' user status, which all University of Florida members already have because UFRC has a Globus License, you can give access to your personal collection on your personal computing device running GCP to other Globus users by creating Shared Collections the way you would do it with a guest collection on HPG. Be very careful here to avoid mistakes while giving other people access to files on your personal computing device using this functionality. See Client Plus for a nice write-up on this functionality.

Once GCP is running and configured you will use the Globus File Explorer interface at https://globus.org for making transfers using your personal collection presented by the GCP instance on your device. Think of GCP as a personal 'Globus Server' and https://globus.org as the interface for making transfers.

Automation

You can automate Globus transfers to avoid having to run GCP personally. See https://docs.globus.org/how-to/automate-with-service-account/ for details. Let us know if you run into any issues.

UFRC Globus Group

Note: this step is not needed if you are only creating and using guest collections created under a managed 'UFRC HiPerGator' collection! This is only needed for creating shared collections on your personal computing device running GCP!

To be able to create shared end-points (see below) on your local computer running GCP, if the transfer will be made to a non-managed endpoint e.g. another local computer with a personal end-point and you are not a University of Florida member you need to have Globus Plus User status. To obtain that status please log into the Globus Interface, click on Groups menu at the top and select Search For Groups. Search for 'University of Florida Research Computing' and access request to the group. Once approved, you will have Globus Plus User status when running 'Globus Connect Personal' software on your local computer.

Direct link to the groups form: https://app.globus.org/groups

Globus CLI

If you need to initiate Globus transfers from the command line e.g. as a part of a workflow you may want to use the Globus Command-Line Interface (CLI). However, before you can initiate globus transfers with the Globus CLI on a given computer, you will have to log in to Globus using the globus login command. If you're in an X11 environment a web browser will be started for you to perform authentication. This happens if you're, for example, are in a terminal in OnDemand console or desktop session and run 

$ module load globus
$ globus login

If you're in a 'headless' environment where GUI programs cannot run use the --no-local-server argument.

Example: 

$ globus login --no-local-server
Please log into Globus here:
---------------------------
https://auth.globus.org/v2/oauth2/authorize?code_challenge=0dlql_6KJbguIncy3-NH
0w8oBOXABa7DqvZ2O2K4bGs&state=_default&redirect_uri=https%3A%2F%2Fauth.globus.o
rg%2Fv2%2Fweb%2Fauth-code&prefill_named_grant=login3.stampede2.tacc.utexas.edu&
response_type=code&client_id=95fdeba8-fac2-42bd-a357-e068d82ff78e&scope=openid+
profile+email+urn%3Aglobus%3Aauth%3Ascope%3Atransfer.api.globus.org%3Aall&code_
challenge_method=S256&access_type=offline
---------------------------

Enter the resulting Authorization Code here:

Copy the URL from the shell and visit that web page in a web browser on any computer. If you are not currently logged in to Globus on that computer, you will be asked to log in at this time. You may log in with your Globus ID or an ID from any organization, such as University of Florida.

You will be taken to a page where an authorization code is displayed. Copy the code to your computer's clipboard.

Paste the authorization code into the shell where you ran the "globus login --no-local-server" command, as a response to its prompt. 

Enter the resulting Authorization Code here: 1zIOeE6leaZpnk0Fxfmi1J8UauARmF

You have successfully logged in to the Globus CLI as johnqpublic@globusid.org

You can always check your current identity with
  globus whoami

Logout of the Globus CLI with
  globus logout

You will now be able to issue Globus CLI commands on this computer. You can check your Globus login status at any time with the command globus whoami.

Retrieved from "https://help.rc.ufl.edu/mediawiki/index.php?title=Globus&oldid=28343"