Difference between revisions of "Transfer Data"
|Line 7:||Line 7:|
;Note: Using the SSH login (gator, hpg2) servers via gator.rc.ufl.edu or hpg2.rc.ufl.edu for
;Note: Using the SSH login (gator, hpg2) servers via gator.rc.ufl.edu or hpg2.rc.ufl.edu for transfers is not allowed. Use the dedicated transfer servers for .
Revision as of 14:29, 21 June 2016
This document describes transferring data between a local computer (client) and HiPerGator (HPG). For the duration of the HiPerGator 1.0 to HiPerGator 2.0 (HPG1->HPG2) transition both HPG1 and HPG2 information will be presented.
There is a variety of command-line, GUI, and even web-based tools available for transferring data to or from HiPerGator and between HPG1 and HPG2. Some examples include 'cp, mv, scp, rsync, or sftp' on the command-line, FileZilla, Cyberduck, WinSCP, or MobaXTerm Gui sotware, or Globus data transfer tool available via a web interface in addition to command-line and GUI versions. The instructions below can be applied to virtually all of the tools mentioned above.
- Using the SSH login (gator, hpg2) servers via gator.rc.ufl.edu or hpg2.rc.ufl.edu for SFTP transfers is not allowed. Use the dedicated transfer servers described here for rsync/sftp. Note that rsync and sftp servers do not allow interactive logins via ssh - only sftp and rsync.
To transfer data to or from HiPerGator 1.0, with its main high-performance filesystem available at /scratch/lfs, connect to the '
rsync.rc.ufl.edu' data transfer server. The name of this server will be changed to point to HiPerGator 2.0 after the HPG1->HPG2 transition is complete.
To transfer data to or from HiPerGator 2.0, with its main high-performance filesystem available at /ufrc, connect to the '
sftp.rc.ufl.edu' data transfer server.
There are two main mechanisms of data transfers between HiPerGator 1.0 (HPG1) and HiPerGator 2.0 (HPG2). For large files a streaming approach of Globus works very well. For many small files a 'cp' or 'rsync' may work better. If in doubt, try Globus first.
To transfer data between /scratch/lfs and /ufrc with cp or rsync log into '
dtn1.ufhpc' from any other node within HiPerGator. This server has a read-only connection to /scratch/lfs, so the data must flow from /scratch/lfs to /ufrc, but since both filesystems are available at the same time both the linux copy command '
cp' and '
rsync' will work.