Modules Basic Usage

From UFRC
Revision as of 19:42, 17 October 2011 by Moskalenko (talk | contribs) (Created page with "Category:ModulesCategory:Infrastructure ==Basic Usage== The minimal information required for using a standalone application at UF HPC: module will output help informatio...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Basic Usage

The minimal information required for using a standalone application at UF HPC:

module

will output help information on running the module command. The module help includes all information described below.

Loading a module

  • If you already know the name of the module, the only command needed to load it and be able to execute the software is 'module load <application>'. For instance, if the module is called ncbi_blast, run the following command
module load ncbi_blast

Unloading a module

  • To remove a module, so its environment gets cleared run
module unload ncbi_blast

All modules are automatically unloaded when you log out of the HPC system, and in most cases, there is no need to use the unload command.

Showing loaded modules

module list

will show all currently active (loaded) modules.

Finding a module

module spider

is a great time saver as it allow you to traverse the entire list of available modules along with short descriptions of the applications they make available. A much more concise, but context specific table of available modules can be obtained with

module avail

The "module avail" command shows all currently accessible branches of the global tree of modules, which depend on what compiler and MPI implementation modules are loaded. The core branch is always shown, but we also have compiler (intel/10.1 and intel/11.1) and mpi (mvapich/0.9.9, mpich2/1.0.8, mvapich2/1.4.1, openmpi/1.2.7, and openmpi/1.3.4 in the intel/10.1 branch as well as mvapich2/1.5.1, openmpi/1.3.4, and openmpi/1.4.3 in the intel/11.1 branch) implementation specific and even python version specific branches of the module tree. The top line at each section shown by 'module avail' shows exactly what loaded module is responsible for enabling that branch of the module tree. Sometimes, to be able to load a module that you find using "module spider" you might have to go through the sequential steps of loading the respective branches. For instance, if you need to load the module for the "espresso" software that was built with MVAPICH2 support using Intel Compiler version 11.1 you would run

module load intel/11.1
module load mvapich2
module load expresso

Showing information about a module

module whatis app

will show a short listing of module specific information such as name, version, category, upstream url, and a short description.

module spider app

or

module spider app/version

will show you the long description and the information on what versions are available for a particular application.

Swapping branches

To switch between different compiler and MPI implementation of a particular app or to gain access to a module that belongs to a particular branch run the following command to swap the old for the new branch

module swap old new

or if you loaded a particular version

module swap old/version new/version

If multiple versions of a particular app/version are available module will automatically reload those modules when you swap the branches, so you could seamlessly switch between a single-threaded version of an app you used for testing and an mpi version that will be used for a large-scale computing job.