Difference between revisions of "Getting Started"

From UFRC
Jump to navigation Jump to search
Line 3: Line 3:
 
   |}
 
   |}
 
==Getting an account==
 
==Getting an account==
To get an account at the UF HPC Center, you need to read the HPC Center [http://www.hpc.ufl.edu/about/policies/account/] and then put a request in at our request page. That page is [http://www.hpc.ufl.edu/support/acctrqst/ located here].
+
To get an account at the UF Research Computing, you need to read [http://www.hpc.ufl.edu/about/policies/account/] and then put a request in at our request page. That page is [http://www.hpc.ufl.edu/support/acctrqst/ located here].
  
 
==Login==
 
==Login==
Line 9: Line 9:
 
Open a terminal and run
 
Open a terminal and run
 
  ssh <YOUR_USERNAME>@submit.hpc.ufl.edu
 
  ssh <YOUR_USERNAME>@submit.hpc.ufl.edu
where <code><YOUR_USERNAME></code> is your HPC Center username, which was sent to you when you got your HPC Center account.
+
where <code><YOUR_USERNAME></code> is your Research Computing username, which was sent to you when you got your Research Computing account.
  
The command <code>ssh <YOUR_USERNAME>@submit.hpc.ufl.edu</code> is what you would type in at a command prompt on your system.  After this, it asks you for a password, which you type in. After that, you are logged in and ready to work.  As a concrete example, if your HPC Center username is "smith", you would use the command <code>ssh smith@submit.hpc.ufl.edu</code> to log into the HPC Center.
+
The command <code>ssh <YOUR_USERNAME>@submit.hpc.ufl.edu</code> is what you would type in at a command prompt on your system.  After this, it asks you for a password, which you type in. After that, you are logged in and ready to work.  As a concrete example, if your Research Computing username is "smith", you would use the command <code>ssh smith@submit.hpc.ufl.edu</code> to log into the Research Computing.
  
 
===Windows===
 
===Windows===
 
Microsoft Windows does not come with a built-in SSH client. You have to download a client from the web. We recommend the following software:
 
Microsoft Windows does not come with a built-in SSH client. You have to download a client from the web. We recommend the following software:
 
* SSH client - [http://www.chiark.greenend.org.uk/~sgtatham/putty Putty]
 
* SSH client - [http://www.chiark.greenend.org.uk/~sgtatham/putty Putty]
** [[PuTTY|configuration instructions for UF HPC]]
+
** [[PuTTY|configuration instructions for UFRC]]
 
* Graphical file transfer clients:
 
* Graphical file transfer clients:
** [http://filezilla-project.org/download.php?type=client FileZilla]. See our [[FileZilla|tutorial on transferring files to UF HPC using FileZilla]].
+
** [http://filezilla-project.org/download.php?type=client FileZilla]. See our [[FileZilla|tutorial on transferring files to UFRC using FileZilla]].
 
** [http://winscp.net/eng/index.php WinSCP]
 
** [http://winscp.net/eng/index.php WinSCP]
 
===MacOS===
 
===MacOS===
Line 28: Line 28:
  
 
==Running Graphical Programs==
 
==Running Graphical Programs==
See the [[GUI_Programs|Gui Programs]] page for information on running graphical user interface applications at HPC.
+
See the [[GUI_Programs|Gui Programs]] page for information on running graphical user interface applications at UFRC.
  
 
==Getting Help==
 
==Getting Help==
If you are having problems connecting to the HPC system, please let the HPC Staff know by submitting a [http://support.hpc.ufl.edu Support Request].
+
If you are having problems connecting to the UFRC system, please let the UFRC Staff know by submitting a [http://support.hpc.ufl.edu Support Request].
  
 
==Interactive work under Linux==
 
==Interactive work under Linux==
Once you are logged in to an HPC Center server, you will find yourself at a Linux command line prompt. That may be daunting at first. However, you only need to know a small subset of Linux commands to accomplish most tasks. There are many Linux "Getting Started" guides online and in print.  Below are just a few possibilities.  Many more are easily found via a Google search.
+
Once you are logged in to a Research Computing server, you will find yourself at a Linux command line prompt. That may be daunting at first. However, you only need to know a small subset of Linux commands to accomplish most tasks. There are many Linux "Getting Started" guides online and in print.  Below are just a few possibilities.  Many more are easily found via a Google search.
  
 
* [http://www.tldp.org/LDP/intro-linux/html/ Introduction to Linux]
 
* [http://www.tldp.org/LDP/intro-linux/html/ Introduction to Linux]
Line 77: Line 77:
  
 
===External Editors===
 
===External Editors===
You can also use your favorite editor on your local machine and then transfer the files over to the HPC Center afterwards. One caveat to this is that with files created on Windows machines, usually contain unprintable characters which may be misinterpreted by Linux command interpreters (shells). If this happens, there is a utility called <code>dos2unix</code> that you can use to convert the text file from DOS/Windows formatting to Linux formatting.
+
You can also use your favorite editor on your local machine and then transfer the files over to the Research Computing afterwards. One caveat to this is that with files created on Windows machines, usually contain unprintable characters which may be misinterpreted by Linux command interpreters (shells). If this happens, there is a utility called <code>dos2unix</code> that you can use to convert the text file from DOS/Windows formatting to Linux formatting.
  
 
==Running Jobs==
 
==Running Jobs==
Line 111: Line 111:
 
$ qstat [-u <username>]
 
$ qstat [-u <username>]
 
</pre>
 
</pre>
or [http://www.hpc.ufl.edu/ HPC] --> Utilization --> [http://www.hpc.ufl.edu/index2.php?body=queue2 Torque Queue Status]
+
or [http://www.hpc.ufl.edu/ UFRC] --> Utilization --> [http://www.hpc.ufl.edu/index2.php?body=queue2 Torque Queue Status]
 
|}
 
|}
  

Revision as of 20:47, 6 September 2013

Getting an account

To get an account at the UF Research Computing, you need to read [1] and then put a request in at our request page. That page is located here.

Login

Linux / Unix

Open a terminal and run

ssh <YOUR_USERNAME>@submit.hpc.ufl.edu

where <YOUR_USERNAME> is your Research Computing username, which was sent to you when you got your Research Computing account.

The command ssh <YOUR_USERNAME>@submit.hpc.ufl.edu is what you would type in at a command prompt on your system. After this, it asks you for a password, which you type in. After that, you are logged in and ready to work. As a concrete example, if your Research Computing username is "smith", you would use the command ssh smith@submit.hpc.ufl.edu to log into the Research Computing.

Windows

Microsoft Windows does not come with a built-in SSH client. You have to download a client from the web. We recommend the following software:

MacOS

For MacOS users, the connection instructions are very similar to those for Linux/Unix users.

Terminal, the terminal emulation application under MacOS is located in Applications/Utilities.

Both FileZilla and Cyberduck are available for MacOS if you prefer a graphical interface for transferring files.

Running Graphical Programs

See the Gui Programs page for information on running graphical user interface applications at UFRC.

Getting Help

If you are having problems connecting to the UFRC system, please let the UFRC Staff know by submitting a Support Request.

Interactive work under Linux

Once you are logged in to a Research Computing server, you will find yourself at a Linux command line prompt. That may be daunting at first. However, you only need to know a small subset of Linux commands to accomplish most tasks. There are many Linux "Getting Started" guides online and in print. Below are just a few possibilities. Many more are easily found via a Google search.

A Few Basic Commands

While it is advantageous to have a working knowledge of the most common Linux commands, it is not a requirement. For the uninitiated, the following information may be useful as well as a good "Introduction to Using Linux" book.

Command Description
ls List files in the current directory
cd Change directory
more View a file's contents
mkdir <dir> Create a directory
cp file1 file2 Copy a file
mv file1 file2 Move (i.e. rename) a file
rm file Delete a file
rmdir dir Delete an empty directory

Editing

Editing files on the cluster can be done through a couple of different methods...

Native Editors

  • vi - The visual editor (vi) is the traditonal Unix editor. However, it is not necessarily the most intuitive editor. That being the case, if you are unfamiliar with it, the following tutorial may be useful.
    • VI Tutorial
    • Another resource for vi is right here on our wiki.
    • There is also a vi tutorial, vimtutor. Once logged in, simply type "vimtutor" at the command line to start the tutorial.
  • emacs - Emacs is a much heavier duty editor, but again has the problem of having commands that are non-intuitive. Again, we have provided a link to a tutorial for this editor.
  • pico - While pico is not installed on the system, nano is installed, and is a pico work-a-like.
  • nano - Nano has a good bit of on-screen help to make it easier to use.

External Editors

You can also use your favorite editor on your local machine and then transfer the files over to the Research Computing afterwards. One caveat to this is that with files created on Windows machines, usually contain unprintable characters which may be misinterpreted by Linux command interpreters (shells). If this happens, there is a utility called dos2unix that you can use to convert the text file from DOS/Windows formatting to Linux formatting.

Running Jobs

Trivial Example

#! /bin/sh
#PBS -N testjob
#PBS -o testjob.out
#PBS -e testjob.err
#PBS -M <INSERT EMAIL HERE>
#PBS -r n
#PBS -l walltime=00:01:00
#PBS -l nodes=1:ppn=1
#PBS -l pmem=100mb

date
hostname

module load python
python -V

To submit this job from submit.hpc.ufl.edu, you would use the following command:

$ qsub <your job script>

To check the status of running jobs, you would use the following command:

$ qstat [-u <username>]

or UFRC --> Utilization --> Torque Queue Status


Notes:

  • See Modules for more information on using the installed software via the environment modules system.

Notes on Batch Scripts

  • The script can handle only one set of directives. Do not submit a script that has more than one set of directives included in it.