Latest revision as of 18:06, 16 April 2024

Welcome to UF Research Computing! This page is intended to help new clients get started on HiPerGator.

Note that new users are highly encouraged to take the New User Training course to familiarize themselves with using a supercomputer for research, save time, and avoid many beginner mistakes.

Introduction to Using HiPerGator

To use HiPerGator or HiPerGator-AI you need 4 basic parts, learn about them below!

From Zero to HiPerGator

Initial Consult

If a face-to-face discussion about the group's needs is needed you can schedule an appointment to meet with one of the UF Research Computing Facilitators face-to-face or virtually, or submit a support request to start the conversation.

HiPerGator Accounts

Group's sponsor has to be the first person to request a HiPerGator account indicating that they are a new sponsor. In the process we will create their sponsored group.

Afterwards, group members will be able to submit HiPerGator account requests indicating their PI as the sponsor. Once approved, their linux accounts will be created.

Note: accounts can only be added to groups with allocations either trial or purchased.

Trial Allocation

We recommend that the group's sponsor request a free trial allocation for storage and computational resources to get the group started on HiPerGator. Group members can then use HiPerGator for the 3 month duration of the trial allocation to figure out what resources and applications they really need.

Purchasing Resources

After or while the group uses a trial allocation to determine the computational and storage resources it needs the group's sponsor can submit a purchase request for hardware (5-years) or services (3-months to longer) to invest into the resources to cover the group's HiPerGator use.

Some groups may have access to shared departmental allocations. In this case, instead of purchasing resources, group members can request to be added to the departmental group to gain access to the shared resources.

Some examples of departments with shared allocations include the Genetics Institute, Emerging Pathogens Institute, Statistics Department, Biostatistics Department, Center for Compressible Multiphase Turbulence (CCMT), Cognitive Aging and Memory Clinical Translational Research Program (CAMCTRP), Center for Molecular Magnetic Quantum Materials, Physics Department, and Plant Pathology Department. In addition, several research groups working on collaborative projects have shared allocations accessible to members of those projects.

At this point a group is established on HiPerGator and can continue their computational work. See below for more details on the basic use.

Using HiPerGator

Use the various HPG Interfaces to connect to the system.
See HPG Computation for an overview of running analyses on HiPerGator.
Read HPG Scheduling for an overview of managing resources in jobs.
Learn how to manage data on the filesystems in Storage and how to transfer it in or out in HPG Data Management.

Getting help

If you are having problems using the UFRC system, try our resources at Help or let our staff know by submitting a support request.

@@ Line 1: / Line 1: @@
-{|align=right
+[[Category:Essentials]]
-  |__TOC__
+Welcome to UF Research Computing! This page is intended to help new clients get started on HiPerGator.
-  |}
-==Getting an account==
-To get an account at the UF Research Computing, you need to read [https://www.rc.ufl.edu/about/policies/account/ UFRC Account Policy] and then [https://www.rc.ufl.edu/help/account-request/ submit an account request].
-==Login==
+Note that new users are highly encouraged to take the [[New_user_training|New User Training]] course to familiarize themselves with using a supercomputer for research, save time, and avoid many beginner mistakes.
-NOTE: If you are using UF's Visitor Wireless, you will not be able to login to our systems using SSH. You will need to arrange for access using some other network.
-===Linux / Unix===
-Open a terminal and run
- ssh <YOUR_USERNAME>@hpg2.rc.ufl.edu
-where <code><YOUR_USERNAME></code> is your Research Computing username, which was sent to you when you got your Research Computing account.
-The command <code>ssh <YOUR_USERNAME>@hpg2.rc.ufl.edu</code> is what you would type in at a command prompt on your system.  After this, it asks you for a password, which you type in. After that, you are logged in and ready to work.  As a concrete example, if your Research Computing username is "smith", you would use the command <code>ssh smith@hpg2.rc.ufl.edu</code> to log into the Research Computing.
+=Introduction to Using HiPerGator=
-===Windows===
+To use HiPerGator or HiPerGator-AI you need 4 basic parts, learn about them below!
-Microsoft Windows does not come with a built-in SSH client. You have to download a client from the web. We recommend the following software:
+<div style = 'text-align: center;'>
-* SSH client - [http://www.chiark.greenend.org.uk/~sgtatham/putty Putty]
+[[Image:Interface.png|frameless|upright=1| link=HPG Interfaces]]
-** [[PuTTY|configuration instructions for UFRC]]
+[[Image:Computation.png|frameless|upright=1|link=HPG Computation]]
-* SSH client - [http://mobaxterm.mobatek.net/ MobaXterm]
+[[Image:Scheduling.png|frameless|upright=1|link=HPG Scheduling]]
-* Graphical file transfer clients:
+[[Image:Storage.png|frameless|upright=1|link=HPG Data Management]]
-** '''Note for file transfers: Clients should be configured to connect to sftp.rc.ufl.edu. File transfers connecting to the normal login nodes will not work'''
+</div>
-** [https://filezilla-project.org/download.php?show_all=1 FileZilla]
+==From Zero to HiPerGator==
-<!-- [http://filezilla-project.org/download.php?type=client FileZilla]. See our [[FileZilla|tutorial on transferring files to UFRC using FileZilla]]. -->
+===Initial Consult===
-** [http://winscp.net/eng/index.php WinSCP]
+If a face-to-face discussion about the group's needs is needed you can [https://outlook.office365.com/owa/calendar/UFITResearchComputingSupport@uflorida.onmicrosoft.com/bookings/ schedule an appointment] to [https://www.rc.ufl.edu/get-support/walk-in-support/ meet with one of the UF Research Computing Facilitators] face-to-face or virtually, or [https://support.rc.ufl.edu/ submit a support request to start the conversation].
-===MacOS===
+===HiPerGator Accounts===
-For MacOS users, the connection instructions are very similar to those for Linux/Unix users.
+Group's sponsor has to be the first person to [https://www.rc.ufl.edu/access/account-request/ request a HiPerGator account] indicating that they are a new sponsor. In the process we will create their sponsored group.
-''Terminal'', the terminal emulation application under MacOS is located in Applications/Utilities.
+Afterwards, group members will be able to [https://www.rc.ufl.edu/access/account-request/ submit HiPerGator account requests] indicating their PI as the sponsor. Once approved, their linux accounts will be created.
-Both [http://filezilla-project.org/download.php?type=client FileZilla] and [http://cyberduck.ch/ Cyberduck] are available for MacOS if you prefer a graphical interface for transferring files.
+'''Note:''' accounts can only be added to groups with allocations either trial or purchased.
-==Running Graphical Programs==
+===Trial Allocation===
-See the [[GUI_Programs|Gui Programs]] page for information on running graphical user interface applications at UFRC.
+We recommend that the group's sponsor [https://gravity.rc.ufl.edu/access/request-trial-allocation/ request a '''free''' trial allocation] for storage and computational resources to get the group started on HiPerGator. Group members can then use HiPerGator for the 3 month duration of the trial allocation to figure out what resources and applications they really need.
-==Getting Help==
+===Purchasing Resources===
-If you are having problems connecting to the UFRC system, please let the UFRC Staff know by submitting a [http://support.rc.ufl.edu Support Request].
+After or while the group uses a trial allocation to determine the computational and storage resources it needs the group's sponsor can submit a purchase request for [https://gravity.rc.ufl.edu/access/purchase-request/hpg-hardware/ hardware (5-years)] or [https://gravity.rc.ufl.edu/access/purchase-request/hpg-service/ services (3-months to longer)] to invest into the resources to cover the group's HiPerGator use.
-==Interactive work under Linux==
+Some groups may have access to shared departmental allocations. In this case, instead of purchasing resources, group members can [https://support.rc.ufl.edu/ request] to be added to the departmental group to gain access to the shared resources.
-Once you are logged in to a Research Computing server, you will find yourself at a Linux command line prompt. That may be daunting at first. However, you only need to know a small subset of Linux commands to accomplish most tasks. There are many Linux "Getting Started" guides online and in print.  Below are just a few possibilities.  Many more are easily found via a Google search.
-* [http://www.tldp.org/LDP/intro-linux/html/ Introduction to Linux]
+Some examples of departments with shared allocations include the [http://ufgi.ufl.edu/ Genetics Institute], [http://epi.ufl.edu/ Emerging Pathogens Institute], [https://stat.ufl.edu/ Statistics Department], [http://biostat.ufl.edu/ Biostatistics Department], [https://www.eng.ufl.edu/ccmt/ Center for Compressible Multiphase Turbulence (CCMT)], [https://chp.phhp.ufl.edu/research/affiliated-centers/center-for-cognitive-aging-memory-cam/ Cognitive Aging and Memory Clinical Translational Research Program (CAMCTRP)], [https://efrc.ufl.edu/ Center for Molecular Magnetic Quantum Materials], [https://www.phys.ufl.edu/ Physics Department], and [https://plantpath.ifas.ufl.edu/ Plant Pathology Department]. In addition, several research groups working on collaborative projects have shared allocations accessible to members of those projects.
-* [http://www.linux.org/tutorial/view/beginners-level-course Linux for Beginners]
-* [[Getting_Started_on_Linux]]
-* [https://www.lynda.com/Linux-tutorials/Learn-Linux-Command-Line-Basics/435539-2.html Linux Command Line Basics - Lynda.com]
-** Users with a Gatorlink account can sign into Lynda.com by clicking "Log In," then "Sign in with your organization"
-==A Few Basic Commands==
+'''At this point a group is established on HiPerGator and can continue their computational work. See below for more details on the basic use.'''
-While it is advantageous to have a working knowledge of the most common Linux commands, it is not a requirement.  For the uninitiated, the following information may be useful as well as a good "Introduction to Using Linux" book.
+==Using HiPerGator==
+* Use the various [[HPG Interfaces]] to connect to the system.
+* See [[HPG Computation]] for an overview of running analyses on HiPerGator.
+* Read [[HPG Scheduling]] for an overview of managing resources in jobs.
+* Learn how to manage data on the filesystems in [[Storage]] and how to transfer it in or out in [[HPG Data Management]].
-{| border=1
+==Getting help==
-|-
+If you are having problems using the UFRC system, try our resources at [https://help.rc.ufl.edu/doc/Category:Help Help] or let our staff know by submitting a [http://support.rc.ufl.edu support request].
-! Command !! Description
-|-
-| ls || List files in the current directory
-|-
-| cd || Change directory
-|-
-| more || View a file's contents
-|-
-| mkdir <dir> || Create a directory
-|-
-| cp file1 file2 || Copy a file
-|-
-| mv file1 file2 || Move (i.e. rename) a file
-|-
-| rm file || Delete a file
-|-
-| rmdir dir || Delete an ''empty'' directory
-|}
-==Editing==
-Editing files on the cluster can be done through a couple of different methods...
-===Native Editors===
-* '''vi''' - The visual editor (vi) is the traditonal Unix editor. However, it is not necessarily the most intuitive editor.  That being the case, if you are unfamiliar with it, the following tutorial may be useful.
-** [http://www.eng.hawaii.edu/Tutor/vi.html VI Tutorial]
-** Another resource for vi is [[vi | right here]] on our wiki.
-** There is also a vi tutorial, '''vimtutor'''. Once logged in, simply type "<code>vimtutor</code>" at the command line to start the tutorial.
-* '''emacs''' - Emacs is a much heavier duty editor, but again has the problem of having commands that are non-intuitive. Again, we have provided a link to a tutorial for this editor.
-** [http://www2.lib.uchicago.edu/~keith//tcl-course/emacs-tutorial.html Emacs Tutorial]
-* '''pico''' - While pico is not installed on the system, [[nano]] is installed, and is a pico work-a-like.
-* '''nano''' - Nano has a good bit of on-screen help to make it easier to use.
-===External Editors===
-You can also use your favorite editor on your local machine and then transfer the files over to the Research Computing afterwards. One caveat to this is that with files created on Windows machines, usually contain unprintable characters which may be misinterpreted by Linux command interpreters (shells). If this happens, there is a utility called <code>dos2unix</code> that you can use to convert the text file from DOS/Windows formatting to Linux formatting.
-==Using Installed Software==
-We use [[Modules|Environment Modules]] to provide access to the installed software. Read about the [[Modules_Basic_Usage|basic usage of environment modules]] for information on loading software.
-==Running Jobs==
-See [[Sample_SLURM_Scripts]] for a simple SLURM job script examples.
-||
-To submit this job from one of login nodes via hpg2.rc.ufl.edu, you would use the following command:
-<pre>
-$ sbatch <your job script>
-</pre>
-To check the status of running jobs, you would use the following command:
-<pre>
-$ squeue [-u <username>]
-</pre>
-|}
-====DRMAA====
-It's possible to submit jobs by using the scheduler API via the DRMAA library. A python example that uses our installed Python DRMAA library can be found in [[Example_pbs-drmaa_python_script]].
-====Notes on Batch Scripts====
-* The script can handle only one set of directives. '''Do not submit a script that has more than one set of directives''' included in it.
-* For more info on '''advanced directives''' see [[PBS_Directives]].
-* Please see our [[Batch Script Explanation | annotated submission script]].
-===Job Status===
-You can view the job status of your jobs and your group's jobs via the [http://rc.ufl.edu/jobstatus/ PBS Job Status] page as described in [[PBS_Job_Status|PBS Job Status Documentation]]
-===Developmental Nodes===
-See [[Test_Nodes]] to read about the available interactive servers.

Difference between revisions of "Getting Started"