Difference between revisions of "GUI Programs"

From UFRC
Jump to navigation Jump to search
 
(6 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
[[Category:Software]][[Category:GUI]]
 
[[Category:Software]][[Category:GUI]]
__TOC__
+
'''The module gui/2 is no longer available. Use this page to know how to use GUI applications on Hipergator.
 +
'''
 +
__NOTOC__
 +
 
 
Here you will find the information necessary to configure and run graphical user interface (GUI) applications on HiPerGator. The process is not complicated, but running a GUI on a remote server and displaying the windows on your local client computer with a sufficiently responsive interface is not as easy as simply running the application locally. We'd like to acknowledge an Open Source [https://xpra.org Xpra Project] for creating software we built our GUI sessions on top of.
 
Here you will find the information necessary to configure and run graphical user interface (GUI) applications on HiPerGator. The process is not complicated, but running a GUI on a remote server and displaying the windows on your local client computer with a sufficiently responsive interface is not as easy as simply running the application locally. We'd like to acknowledge an Open Source [https://xpra.org Xpra Project] for creating software we built our GUI sessions on top of.
  
{{Note|Open on Demand is only accessible from the UF network. Use the [https://vpn.ufl.edu VPN] if off campus.|warn}}
+
==X11 Forwarding==
 
 
If you are working off campus, you will need to use the VPN to connect to the UF campus network using [https://connect.ufl.edu/it/wiki/Pages/glvpn-anyconnect-install.aspx AnyConnect VPN] or similar software. Please see: [https://vpn.ufl.edu https://vpn.ufl.edu] for additional information.
 
 
 
=X11 Forwarding=
 
 
For the simplest case of running a lightweight GUI application for a very short time you can log into HiPerGator with
 
For the simplest case of running a lightweight GUI application for a very short time you can log into HiPerGator with
 
  ssh -Y MYUSER@hpg.rc.ufl.edu
 
  ssh -Y MYUSER@hpg.rc.ufl.edu
 
load the environment module your application is in and run it. Do not analyze data this way, but running a text editor, a web browser to log in and get an api token from a remote service or some other very short and lightweight operations are fine.
 
load the environment module your application is in and run it. Do not analyze data this way, but running a text editor, a web browser to log in and get an api token from a remote service or some other very short and lightweight operations are fine.
  
=Open OnDemand=
+
==Open OnDemand==
 
Normally the X11 DISPLAY variable is set once the X11 server is started.  This can be done manually, as described above, but an easier method is to use [https://help.rc.ufl.edu/doc/Open_OnDemand#Display_Environment_on_the_Console Open OnDemand] since that will start an X11 server and allocate the frame buffer automatically.
 
Normally the X11 DISPLAY variable is set once the X11 server is started.  This can be done manually, as described above, but an easier method is to use [https://help.rc.ufl.edu/doc/Open_OnDemand#Display_Environment_on_the_Console Open OnDemand] since that will start an X11 server and allocate the frame buffer automatically.
  
We are testing an [https://openondemand.org/ Open OnDemand] setup to provide a web-only interface to starting and attaching to GUI programs and Virtual Machines with seamless connections through web browsers. This service is available at the following URL:
+
[https://openondemand.org/ Open OnDemand] provides a web-only interface to starting and attaching to GUI programs with seamless connections through web browsers. This service is available at the following URL:
  
 
https://ondemand.rc.ufl.edu
 
https://ondemand.rc.ufl.edu
  
To provide feedback, please open a support request with [OnDemand Feedback] in the subject.
+
{{Note|Many applications have their own interfaces, but other can also be launched by launching a HiPerGator Desktop and then opening the application with the desktop interface.|info}}
 
 
{{Note|Ondemand is currently a Beta service. Users are welcome to test the service and submit support requests with feedback. However, no SLA is guaranteed and all features should be considered experimental.|warn}}
 
  
==[https://mediasite.video.ufl.edu/Mediasite/Play/4654bfa838624de894085bf54678848f1d Using Open on Demand on HiPerGator]==
+
===[https://mediasite.video.ufl.edu/Mediasite/Play/4654bfa838624de894085bf54678848f1d Using Open on Demand on HiPerGator]===
 
[[File:Play_icon.png|frameless|30px|link=https://mediasite.video.ufl.edu/Mediasite/Play/4654bfa838624de894085bf54678848f1d]] [5 min, 11 sec]
 
[[File:Play_icon.png|frameless|30px|link=https://mediasite.video.ufl.edu/Mediasite/Play/4654bfa838624de894085bf54678848f1d]] [5 min, 11 sec]
 
This video covers the use of Open on Demand https://openondemand.org/ on HiPerGator via https://ood.rc.ufl.edu/.
 
This video covers the use of Open on Demand https://openondemand.org/ on HiPerGator via https://ood.rc.ufl.edu/.
Line 31: Line 28:
 
* Manage job submission
 
* Manage job submission
 
* Upload, download and edit files via your browser
 
* Upload, download and edit files via your browser
 
=RC GUI-2.0=
 
This is the second iteration of the UFRC approach to starting GUI programs in SLURM jobs on HiPerGator and attaching to them over any modern web browser.
 
 
The new gui/2 module is explained in this video:
 
[[File:Play_icon.png|frameless|30px|link=https://mediasite.video.ufl.edu/Mediasite/Play/195d0d9dc3e640ffb874cf90ac505a1a1d]] [5 min, 16 sec]
 
 
==Start Session==
 
* Log into HiPerGator
 
* Load the environment module
 
$ module load gui/2
 
* Start a GUI session
 
:* Example: RStudio with 2 cpus, 8gb of memory, 24 hours of run time
 
$ gui start -e rstudio -c 2 -m 8 -t 24
 
:* If the executable you want to run is not the same as the module name you need to use --module
 
$ gui start --module fsl/6.0.3 -e fsleyes -c 2 -m 8 -t 24
 
:* Example: Matlab with default resources (1 cpu, 4gb memory, 2 hours of run time)
 
$ gui start -e matlab
 
See <code>gui start -h</code> to see all available options.
 
:* Example: Hardware-accelerated MatLab instance
 
$ gui start --gpu -e matlab
 
 
==Show Running Sessions==
 
'''Note:''' Give the session from few seconds to a couple of minutes to start if the output is empty.
 
$ gui show
 
The output will look similar to the following e.g. with four active sessions and real passwords listed instead of 'REDACTED' in the example:
 
<pre>
 
Current GUI sessions:
 
______________________________________________________________________________
 
#:  JobID    Application  Type  State      Reason
 
1: 38005270  rstudio      gui  RUNNING   
 
2: 38005271  rstudio      gui  RUNNING   
 
3: 38005272  rstudio      gui  RUNNING 
 
4: 38005355  matlab        gui  RUNNING   
 
 
------------------------------------------------------------------------------
 
Connection URLs:
 
1: https://gui3.rc.ufl.edu/4207/?password=REDACTED
 
2: https://gui3.rc.ufl.edu/5713/?password=REDACTED
 
3: https://gui5.rc.ufl.edu/12474/?password=REDACTED
 
4: https://gui5.rc.ufl.edu/4078/?password=REDACTED
 
______________________________________________________________________________
 
 
Please copy a connection URL and paste it into a modern web browser's
 
location bar on your LOCAL computer located on campus or connected via VPN
 
</pre>
 
 
==Connect To Session==
 
* Attach to a session
 
Copy and paste a session URI into a modern browser (tested on Firefox and Chrome/Chromium) e.g.
 
https://gui3.rc.ufl.edu/4207/?password=REDACTED
 
As a result the browser tab becomes a 'desktop canvas' and the GUI program window should be visible and can be resized or maximized to the limits of the browser tab window as normal.
 
 
==Stop a GUI Session==
 
To stop a session either close the application, which will cause the SLURM job to automatically terminate, or cancel the session on the command-line with
 
gui stop SESSION_ID
 
E.g.
 
<pre>
 
$ gui stop 3
 
Current GUI sessions:
 
______________________________________________________________________________
 
#:  JobID    Application  Type  State      Reason
 
1: 38005270  rstudio      gui  RUNNING   
 
2: 38005271  rstudio      gui  RUNNING   
 
3: 38005272  rstudio      gui  COMPLETING  Stopping session and cleaning up
 
------------------------------------------------------------------------------
 
Connection URLs:
 
1: https://gui3.rc.ufl.edu/4207/?password=REDACTED
 
2: https://gui3.rc.ufl.edu/5713/?password=REDACTED
 
______________________________________________________________________________
 
 
Please copy a connection URL and paste it into a modern web browser's
 
location bar on your LOCAL computer located on campus or connected via VPN
 
</pre>
 
 
This is all it should take to use the 2nd generation setup.
 
 
=Hardware Accelerated GUI=
 
To use hardware acceleration for applications launched with '''gui/2''' use the <code>--gpu</code> argument with 'gui start'
 

Latest revision as of 14:42, 30 January 2023

The module gui/2 is no longer available. Use this page to know how to use GUI applications on Hipergator.


Here you will find the information necessary to configure and run graphical user interface (GUI) applications on HiPerGator. The process is not complicated, but running a GUI on a remote server and displaying the windows on your local client computer with a sufficiently responsive interface is not as easy as simply running the application locally. We'd like to acknowledge an Open Source Xpra Project for creating software we built our GUI sessions on top of.

X11 Forwarding

For the simplest case of running a lightweight GUI application for a very short time you can log into HiPerGator with

ssh -Y MYUSER@hpg.rc.ufl.edu

load the environment module your application is in and run it. Do not analyze data this way, but running a text editor, a web browser to log in and get an api token from a remote service or some other very short and lightweight operations are fine.

Open OnDemand

Normally the X11 DISPLAY variable is set once the X11 server is started. This can be done manually, as described above, but an easier method is to use Open OnDemand since that will start an X11 server and allocate the frame buffer automatically.

Open OnDemand provides a web-only interface to starting and attaching to GUI programs with seamless connections through web browsers. This service is available at the following URL:

https://ondemand.rc.ufl.edu

Many applications have their own interfaces, but other can also be launched by launching a HiPerGator Desktop and then opening the application with the desktop interface.

Using Open on Demand on HiPerGator

Play icon.png [5 min, 11 sec] This video covers the use of Open on Demand https://openondemand.org/ on HiPerGator via https://ood.rc.ufl.edu/.

  • Connect to https://ood.rc.ufl.edu/
  • Launch a terminal
  • Launch many graphical applications like Rstudio, Matlab and Freeview
  • Manage job submission
  • Upload, download and edit files via your browser