Account and QOS limits under SLURM

From UFRC
Jump to navigation Jump to search

Every group on HiPerGator (HPG) must have an investment with a corresponding hardware allocation to be able to do any work on HPG. Each allocation is associated with a scheduler account. Each account has two quality of service (QOS) levels - high-priority investment QOS and a low-priority burst QOS. The latter allows short-term borrowing of unused resources from other groups' accounts. In turn, each user in a group has a scheduler account association. In the end, it is this association which determines which QOSes are available to a particular user. Users with secondary Linux group membership will have associations with QOSes from their secondary groups.

In summary, each HPG user has scheduler associations with group account based QOSes that determine what resources are available to the users's jobs. These QOSes can be thought of as pools of computational (CPU cores), memory (RAM), maximum run time (time limit) resources with associated starting priority levels that can be consumed by jobs to run applications according to QOS levels, which we will review below.

Account and QOS

Using/Finding the resources from a secondary group

To view instructions on using SLURM resources from one of your secondary groups, or find what those associations are, view Checking and Using Secondary Resources

CPU cores and Memory (RAM) Resource Use

CPU cores and RAM are allocated to jobs independently as requested in job scripts. Considerations for selecting how many CPU cores and how much memory to request for a job must take into account the QOS limits based on the group investment, the limitations of the hardware (compute nodes), and the desire to be a good neighbor on a shared resource like HiPerGator to ensure that system resources are allocated efficiently, used fairly, and everyone has a chance to get their work done without causing negative impacts on work performed by other researchers.

HiPerGator consists of many interconnected servers (compute nodes). The hardware resources of each compute node, including CPU cores, memory, memory bandwidth, network bandwidth, and local storage are limited. If any single one of the above resources is fully consumed the remaining unused resources can become effectively wasted, which makes it progressively harder or even impossible to achieve the shared goals of Research Computing and the UF Researcher Community stated above. See the Available Node Features for details on the hardware on compute nodes. Nodes with similar hardware are generally separated into partitions. If the job requires larger nodes or particular hardware make sure to explicitly specify a partition. Example:

--partition=bigmem

When a job is submitted, if no resource request is provided, the default limits of 1 CPU core, 600MB of memory, and a 10 minute time limit will be set on the job by the scheduler. Check the resource request if it's not clear why the job ended before the analysis was done. Premature exit can be due to the job exceeding the time limit or the application using more memory than the request.

Run testing jobs to find out what resource a particular analysis needs. To make sure that the analysis is performed successfully without wasting valuable resources you must specify both the number of CPU cores and the amount of memory needed for the analysis in the job script. See Sample SLURM Scripts for examples of specifying CPU core requests depending on the nature of the application running in a job. Use --mem (total job memory on a node) or --mem-per-cpu (per-core memory) options to request memory. Use --time to set a time limit to an appropriate value within the QOS limit.

As jobs are submitted and the resources under a particular account are consumed the group may reach either the CPU or Memory group limit. The group has consumed all cores in a QOS if the scheduler shows QOSGrpCpuLimit or memory if the scheduler shows QOSGrpMemLimit in the reason a job is pending ('NODELIST(REASON)' column of the squeue command output). Example:

             JOBID PARTITION     NAME     USER ST       TIME  NODES NODELIST(REASON)
            123456    bigmem test_job     jdoe PD       0:00      1 (QOSGrpMemLimit)

Reaching a resource limit of a QOS does not interfere with job submission. However, the jobs with this reason will not run and will remain in the pending state until the QOS use falls below the limit.

If the resource request for submitted job is impossible to satisfy within either the QOS limits or HiPerGator compute node hardware for a particular partition the scheduler will refuse the job submission altogether and return the following error message,

sbatch: error: Batch job submission failed: Job violates accounting/QOS policy 
               (job submit limit, user's size and/or time limits)

Time and Resource Limits

For details on the limits placed on time and resources like GPUs on SLURM, view QOS Limits.

Choosing QOS for a Job

For advice on choosing QOS, go to Choosing QOS for a Job.

Example

Expand this section to view extended example.

A hypothetical group ($GROUP in the examples below) has an investment of 42 CPU cores and 148GB of memory. That's the group's so-called soft limit for HiPerGator jobs in the investment qos for up to 744 hour time limit at high priority. The hard limit accessible through the so-called burst qos is 9 times that giving a group potentially a total of 10x the invested resources i.e. 420 total CPU cores and 1480GB of total memory with burst qos providing 378 CPU cores and 1330GB of total memory for up to 96 hours at low base priority.

Let's test:

 [marvin@gator ~]$ srun --mem=126gb --pty bash -i

srun: job 123456 queued and waiting for resources

#Looks good, let's terminate the request with Ctrl+C>

^C
srun: Job allocation 123456 has been revoked
srun: Force Terminated job 123456

On the other hand, going even 1gb over that limit results in the already encountered job limit error

[marvin@gator ~]$ srun --mem=127gb --pty bash -i
srun: error: Unable to allocate resources: Job violates accounting/QOS policy (job submit limit, user's size and/or time limits

At this point the group can try using the 'burst' QOS with

#SBATCH --qos=$GROUP-b

Let's test:

[marvin@gator3 ~]$ srun -p bigmem --mem=400gb --time=96:00:00 --qos=$GROUP-b --pty bash -i

srun: job  123457 queued and waiting for resources

#Looks good, let's terminate with Ctrl+C

^C
srun: Job allocation 123457 has been revoked
srun: Force Terminated job 123457

However, now there's the burst qos time limit to consider.

[marvin@gator ~]$ srun --mem=400gb --time=300:00:00 --pty bash -i

srun: error: Unable to allocate resources: Job violates accounting/QOS policy (job submit limit, user's size and/or time limits

Let's reduce the time limit to what burst qos supports and try again.

[marvin@gator ~]$ srun --mem=400gb --time=96:00:00 --pty bash -i

srun: job  123458 queued and waiting for resources

#Looks good, let's terminate with Ctrl+C

^C
srun: Job allocation 123458 has been revoked
srun: Force Terminated job

Pending Job Reasons

To reiterate, the following Reasons can be seen in the NODELIST(REASON) column of the squeue command when the group reaches the resource limit for a QOS:

QOSGrpCpuLimit

All CPU cores available for the listed account within the respective QOS are in use.

QOSGrpMemLimit

All memory available for the listed account within the respective QOS as described in the previous section is in use.

Once it has marked any jobs in the group's list of pending jobs with a reason of QOSGrpCpuLimit or QOSGrpMemLimit, SLURM may not evaluate other jobs and they may simply be listed with the Priority reason code. See Why is my job not running for a list of reasons.