Difference between revisions of "Account and QOS limits under SLURM"

From UFRC
Jump to navigation Jump to search
Line 176: Line 176:
  
 
Let's test:
 
Let's test:
<source lang=bash>
+
<pre>
[marvin@gator ~]$ srun --mem=126gb --pty bash -i
+
[marvin@gator ~]$ srun --mem=126gb --pty bash -i
  
 
srun: job 123456 queued and waiting for resources
 
srun: job 123456 queued and waiting for resources
Line 186: Line 186:
 
srun: Job allocation 123456 has been revoked
 
srun: Job allocation 123456 has been revoked
 
srun: Force Terminated job 123456
 
srun: Force Terminated job 123456
</source>
+
</pre>
  
 
On the other hand, going even 1gb over that limit results in the already encountered job limit error
 
On the other hand, going even 1gb over that limit results in the already encountered job limit error
  
<source lang=bash>
+
<pre>
 
[marvin@gator ~]$ srun --mem=127gb --pty bash -i
 
[marvin@gator ~]$ srun --mem=127gb --pty bash -i
 
srun: error: Unable to allocate resources: Job violates accounting/QOS policy (job submit limit, user's size and/or time limits
 
srun: error: Unable to allocate resources: Job violates accounting/QOS policy (job submit limit, user's size and/or time limits
</source>
+
</pre>
  
 
At this point the group can try using the 'burst' QOS with
 
At this point the group can try using the 'burst' QOS with
 
+
#SBATCH --qos=$GROUP-b
<source lang=bash>
 
#SBATCH --qos=$GROUP-b
 
</source>
 
  
 
Let's test:
 
Let's test:
 
+
<pre>
<source lang=bash>
 
 
[marvin@gator3 ~]$ srun -p bigmem --mem=400gb --time=96:00:00 --qos=$GROUP-b --pty bash -i
 
[marvin@gator3 ~]$ srun -p bigmem --mem=400gb --time=96:00:00 --qos=$GROUP-b --pty bash -i
  
Line 213: Line 209:
 
srun: Job allocation 123457 has been revoked
 
srun: Job allocation 123457 has been revoked
 
srun: Force Terminated job 123457
 
srun: Force Terminated job 123457
</source>
+
</pre>
  
 
However, now there's the burst qos time limit to consider.
 
However, now there's the burst qos time limit to consider.
  
<source lang=bash>
+
<pre>
 
[marvin@gator ~]$ srun --mem=400gb --time=300:00:00 --pty bash -i
 
[marvin@gator ~]$ srun --mem=400gb --time=300:00:00 --pty bash -i
  
 
srun: error: Unable to allocate resources: Job violates accounting/QOS policy (job submit limit, user's size and/or time limits
 
srun: error: Unable to allocate resources: Job violates accounting/QOS policy (job submit limit, user's size and/or time limits
</source>
+
</pre>
  
 
Let's reduce the time limit to what burst qos supports and try again.
 
Let's reduce the time limit to what burst qos supports and try again.
  
<source lang=bash>
+
<pre>
 
[marvin@gator ~]$ srun --mem=400gb --time=96:00:00 --pty bash -i
 
[marvin@gator ~]$ srun --mem=400gb --time=96:00:00 --pty bash -i
  
Line 235: Line 231:
 
srun: Job allocation 123458 has been revoked
 
srun: Job allocation 123458 has been revoked
 
srun: Force Terminated job
 
srun: Force Terminated job
</source>
+
</pre>
 
 
  
 
==Pending Job Reasons==
 
==Pending Job Reasons==

Revision as of 20:19, 28 August 2019

Every group on HiPerGator (HPG) must have an investment with a corresponding hardware allocation to be able to do any work on HPG. Each allocation is associated with a scheduler account. Each account has two quality of service (QOS) levels - hight-priority investment QOS and a low-priority burst QOS. The latter allows short-term borrowing of unused resources from other groups' accounts. In turn, each user in a group has a scheduler account association. In the end, it is this association which determines which QOSes are available to a particular user. Users with secondary Linux group membership will have associations with QOSes from their secondary groups.

In summary, each HPG user has scheduler associations with group account based QOSes that determine what resources are available to the users's jobs. These QOSes can be thought of as pools of computational (CPU cores), memory (RAM), maximum run time (time limit) resources with associated starting priority levels that can be consumed by jobs to run applications according to policies set for QOS levels, which we will review below.

Account and QOS

Load the ufrc environment module before running the following commands with
$ module load ufrc
  • See your associations:
$ showAssoc <username>

Example: $ showAssoc magitz output:

              User    Account   Def Acct   Def QOS                                      QOS 
------------------ ---------- ---------- --------- ---------------------------------------- 
magitz                zoo6927      ufhpc     ufhpc zoo6927,zoo6927-b                        
magitz                  ufhpc      ufhpc     ufhpc ufhpc,ufhpc-b                            
magitz                 soltis      ufhpc    soltis soltis,soltis-b                          
magitz                  borum      ufhpc     borum borum,borum-b   

The output shows that the user magitz has four account associations and 8 different QOSes. By convention, a user's default account is always the account of their primary group. Additionally, their default QOS is the investment (high-priority) QOS. If a user does not explicitly request a specific account and QOS, the user's default account and QOS will be assigned to the job.

If the user magitz wanted to use the borum group's account - which he has access by virtue of the borum account association - he would specify the account and the chosen QOS in his batch script as follows:

 #SBATCH  --account=borum
 #SBATCH  --qos=borum

Or, for the burst QOS:

 #SBATCH  --account=borum
 #SBATCH  --qos=borum-b

Note that both must be specified. Otherwise scheduler will assume the default ufhpc account is intended, and neither the borum nor borum-b QOSes will be available to the job. Consequently, scheduler would deny the submission.

These sbatch directives can also be given as command line arguments to srun. For example:

$ srun --account=borum --qos=borum-b <example_command>

QOS Resource Limits

CPU cores, Memory (RAM), GPU accelerators, software licenses, etc. are referred to as Trackable Resources (TRES) by the scheduler. The TRES available in a given QOS are determined by the group's investments and the QOS policy.

View a trackable resource limits for a QOS:

$ showQos <specified_qos>

Example: $ showQos borum output:

                Name                          Descr                                       GrpTRES  GrpCPUs 
-------------------- ------------------------------ --------------------------------------------- -------- 
borum                borum qos                      cpu=9,gres/gpu=0,mem=32400M                          9 

We can see that the borum investment QOS has a pool of 9 CPU cores, 32GB of RAM, and no GPUs. This pool of resources is shared among all members of the borum group.


Similarly, the borum-b> burst QOS resource limits shown by $ showQos borum-b are:

                Name                          Descr                                       GrpTRES  GrpCPUs 
-------------------- ------------------------------ --------------------------------------------- -------- 
borum-b              borum burst qos                cpu=81,gres/gpu=0,mem=291600M                       81 


There are additional base priority and run time limits associated with QOSes. To display them run

 $ sacctmgr show qos format="name%-20,Description%-30,priority,maxwall" <specified_qos> 

Example: $ sacctmgr show qos format="name%-20,Description%-30,priority,maxwall" borum borum-b output:

                Name                          Descr   Priority     MaxWall 
-------------------- ------------------------------ ---------- ----------- 
borum                borum qos                           36000 31-00:00:00 
borum-b              borum burst qos                       900  4-00:00:00 

The investment and burst QOS jobs are limited to 31 and 4 day run times, respectively. Additionally, the base priority of a burst QOS job is 1/40th that of an investment QOS job. It is important to remember that the base priority is only one component of the jobs overall priority and that the priority will change over time as the job waits in the queue.

By policy, the burst QOS cpu and memory limits are nine times (9x) those of the investment QOS up to a certain limit and are intended to allow groups to take advantage of unused resources short periods of time by borrowing resources from other groups.

QOS Time Limits

  • Jobs with longer time limits are more difficult to schedule.
  • Long time limits make system maintenance harder. We have to perform maintenance on the systems (OS updates, security patches, etc.). If the allowable time limits were longer, it could make important maintenance tasks virtually impossible. Of particular importance is the ability to install security updates on the systems quickly and efficiently. If we cannot install them because user jobs are running for months at a time, we have to choose to either kill the user jobs or risk security issues on the system, which could affect all users.
  • The longer a job runs, the more likely it is to end prematurely due to random hardware failure.

Thus, if the application allows saving and resuming the analysis it is recommended that instead of running jobs for extremely long times, you utilize checkpointing of your jobs so that you can restart them and run shorter jobs instead.

The 31 day investment QOS time limit on HiPerGator is generous compared to other major institutions. Here are examples we were able to find.

Institution Maximum Runtime
New York University 4 days
University of Southern California 2 weeks for 1 node, otherwise 1 day
PennState 2 weeks for up to 32 cores (contributors), 4 days for up to 256 cores otherwise
UMBC 5 days
TACC: Stampede 2 days
TACC: Lonestar 1 day
Princeton: Della 6 days
Princeton: Hecate 15 days
University of Maryland 14 days

CPU cores Memory (RAM) Resource Use

CPU cores and RAM are allocated to jobs independently as requested in job scripts. Considerations for selecting how many CPU cores and how much memory to request for a job must take into account the QOS limits based on the group investment, the limitations of the hardware (compute nodes), and the desire to be a good neighbor on a shared resource like HiPerGator to ensure that system resources are allocated efficiently, used fairly, and everyone has a chance to get their work done without causing negative impacts on work performed by other researchers.

HiPerGator consists of many interconnected servers (compute nodes). The hardware resources of each compute node, including CPU cores, memory, memory bandwidth, network bandwidth, and local storage are limited. If any single one of the above resources is fully consumed the remaining unused resources can become effectively wasted, which makes it progressively harder or even impossible to achieve the shared goals of Research Computing and the UF Researcher Community stated above. See the Available Node Features for details on the hardware on compute nodes.

When a job is submitted if no resource request is provided the default limits of 1 CPU core, 600MB of memory, and a 10 minute time limit will be set on the job by the scheduler. Check the resource request right away if it's not clear why the job ended before the analysis was done. Premature exit can be due to the job exceeding the time limit or the application using more memory than the request.

Run testing jobs to find out what resource a particular analysis needs. To make sure that the analysis is performed successfully without wasting valuable resources you must specify both the number of CPU cores and the amount of memory needed for the analysis in the job script. See Sample SLURM Scripts for examples of specifying CPU core requests depending on the nature of the application running in a job. Use --mem (total job memory on a node) or --mem-per-cpu (per-core memory) options to request memory. Use --time to set a time limit to an appropriate value within the QOS limit.

As jobs are submitted and the resources under a particular account are consumed the group may reach either the CPU or Memory group limit. The group has consumed all cores in a QOS if the scheduler shows QOSGrpCpuLimit or memory if the scheduler shows QOSGrpMemLimit in the reason a job is pending ('NODELIST(REASON)' column of the squeue command output).

Example:

             JOBID PARTITION     NAME     USER ST       TIME  NODES NODELIST(REASON)
            123456    bigmem test_job     jdoe PD       0:00      1 (QOSGrpMemLimit)

Reaching a resource limit of a QOS does not interfere with job submission. However, the jobs with this reason will not run and will remain in the pending state until the QOS use falls below the limit.

If the resource request for submitted job is impossible to satisfy within either the QOS limits or HiPerGator compute node hardware the scheduler will refuse the job submission altogether and return the following error message,

sbatch: error: Batch job submission failed: Job violates accounting/QOS policy 
               (job submit limit, user's size and/or time limits)

Choosing QOS for a Job

When choosing between the high-priority investment QOS and the 9x larger low-priority burst QOS, you should start by considering the overall resource requirements for the job. For smaller allocations the investment QOS may not be large enough for some jobs, whereas for other smaller jobs the wait time in the burst QOS could be too long. In addition, consider the current state of the account you are planning to use for your job.

To show the status of any SLURM account as well as the overall usage of HiPerGator resources, use the following command from the ufrc environment module:

$ slurmInfo

for the primary account or

$ slurmInfo <account>

for another account

Example: $ slurmInfo ufgi:

----------------------------------------------------------------------
Allocation summary:    Time Limit             Hardware Resources
   Investment QOS           Hours          CPU     MEM(GB)     GPU
----------------------------------------------------------------------
             ufgi             744          150         527       0
----------------------------------------------------------------------
CPU/MEM Usage:                Running        Pending        Total
                       CPU   MEM(GB)    CPU   MEM(GB)    CPU   MEM(GB)
----------------------------------------------------------------------
     Investment (ufgi):   100      280     0        0   100      280
----------------------------------------------------------------------
HiPerGator Utilization
               CPU: Used (%) / Total        MEM(GB): Used (%) / Total
----------------------------------------------------------------------
        Total :  43643 (92%) / 47300    113295500 (57%) /   196328830
----------------------------------------------------------------------
* Burst QOS uses idle cores at low priority with a 4-day time limit

Run 'slurmInfo -h' to see all available options

The output shows that the investment QOS for the ufgi account is actively used. Since 100 CPU cores out of 150 available are used only 50 cores are available. In the same vein since 280GB out of 527GB in the investment QOS are used 247GB are still available. The ufgi-b burst QOS is unused. Te total HiPerGator use is 92% of all CPU cores and 57% of all memory on compute nodes, which means that there's little available capacity from which burst resources can be drawn. In this case a job submitted to the ufgi-b QOS would likely take a long time to start. If the overall utilization was below 80% it would be easier to start a burst job within a reasonable amount of time. It would also enjoy access to much larger amount of computational and memory resources. When the HiPerGator load is highe, or if the burst QOS is actively used, the investment QOS is be more appropriate for a smaller job.


Examples

A hypothetical group ($GROUP in the examples below) has an investment of 42 CPU cores and 148GB of memory. That's the group's so-called soft limit for HiPerGator jobs in the investment qos for up to 744 hour time limit at high priority. The hard limit accessible through the so-called burst qos is 9 times that giving a group potentially a total of 10x the invested resources i.e. 420 total CPU cores and 1480GB of total memory with burst qos providing 378 CPU cores and 1330GB of total memory for up to 96 hours at low base priority.

Let's test:

 [marvin@gator ~]$ srun --mem=126gb --pty bash -i

srun: job 123456 queued and waiting for resources

#Looks good, let's terminate the request with Ctrl+C>

^C
srun: Job allocation 123456 has been revoked
srun: Force Terminated job 123456

On the other hand, going even 1gb over that limit results in the already encountered job limit error

[marvin@gator ~]$ srun --mem=127gb --pty bash -i
srun: error: Unable to allocate resources: Job violates accounting/QOS policy (job submit limit, user's size and/or time limits

At this point the group can try using the 'burst' QOS with

#SBATCH --qos=$GROUP-b

Let's test:

[marvin@gator3 ~]$ srun -p bigmem --mem=400gb --time=96:00:00 --qos=$GROUP-b --pty bash -i

srun: job  123457 queued and waiting for resources

#Looks good, let's terminate with Ctrl+C

^C
srun: Job allocation 123457 has been revoked
srun: Force Terminated job 123457

However, now there's the burst qos time limit to consider.

[marvin@gator ~]$ srun --mem=400gb --time=300:00:00 --pty bash -i

srun: error: Unable to allocate resources: Job violates accounting/QOS policy (job submit limit, user's size and/or time limits

Let's reduce the time limit to what burst qos supports and try again.

[marvin@gator ~]$ srun --mem=400gb --time=96:00:00 --pty bash -i

srun: job  123458 queued and waiting for resources

#Looks good, let's terminate with Ctrl+C

^C
srun: Job allocation 123458 has been revoked
srun: Force Terminated job

Pending Job Reasons

To reiterate, the following Reasons can be seen in the NODELIST(REASON) column of the squeue command when the group reaches the resource limit for a QOS:

QOSGrpCpuLimit

All CPU cores available for the listed account within the respective QOS are in use.

QOSGrpMemLimit

All memory available for the listed account within the respective QOS as described in the previous section is in use.