Latest revision as of 08:47, 25 July 2013

STREAM

A few words about numactl

NUMA is an acronym for Non Uniform Memory Access, and numactl is a tool to assign memory to the node. Following are a few important keywords one should know before embarking on the numactl mission:

physcpubind = ID of the cores
cpunodebind = ID of the nodes
membind = ID of the node that the memory is assigned to

For example, on an AMD machine with 16 cores, or in the terminology of NUMA, 4 nodes with 4 cores on each node, the command line

–membind=0 –physcpubind=0-3

asigns four threads running on cores 0 to 3 (node 0) with the memory also assigned to the node 0. However, the command line

–membind=1 –physcpubind=0-3

assigns four threads on the cores 0 to 3 (node 0) but the memory is assigned to the node 1. As this memory is not local to the node that the threads are running on, the performance will be affected. Assigning memory locally to the node can also be done by ”-l” option of the numactl.

Alternatively, above command lines can be shortened by using "cpunodebind". For example,

–membind=0 –cpunodebind=0

means that the memory is assigned to node 0 and the threads are also running on node 0. One should note that with the use of "cpunodebind" the number of threads will be equal to the number of cores on the node, so in this case number of threads has to be equal to four. However, if we wish to run two threads on node 0, its only possible with "physcpubind". You have more control of running your threads with "physcpubind" as you can choose the cores that you wish to run your jobs on. For detail description please follow the manual page of numactl.

Intel (2 x E5-2643 @ 3.30GHz)

Streams is a well-known memory bandwidth benchmark. Before we attempt to find the maximum bandwidth, it's necessary to find out the architecture of the machine. The command "numactl --hardware" on this machine produces:

available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3
node 0 size: 32739 MB
node 0 free: 30624 MB
node 1 cpus: 4 5 6 7
node 1 size: 32768 MB
node 1 free: 31280 MB
node distances:
node   0   1
  0:  10  21
  1:  21  10

From the above result, we can conclude that there are two numa nodes with four cores on each: in total eight cores.

Before measuring the maximum memory bandwidth of the server, we first determine the number of threads required to achieve the maximum bandwidth of a given NUMA node. Results are summarized in the following table:

Number of threads	Bandwidth (GB/s)
1	9.5
2	18.8
3	21.4
4	34.0

From the above table, we conclude that the maximum number of threads that we need to run on each node is four. Above table was obtained by running the threads on node 0 and assigning the memory on the same node as well. This result can be reproduced on other nodes as well.

Following table describes the effect of variation of memory allocation with respect to the processors where the threads are running on the memory bandwidth(number of threads is four):

MEM CPU	0	1
0	34.0	17.4
1	18.9	33.5

In the above table, variation of the memory nodes are in the rows while cpu nodes are in the column. You can clearly see the effect of memory binding with the respect to the cores where the threads are running. Please note that the above table resembles the "node distance table " obtained using "numactl --hardware" earlier.

AMD (2 x 6220 @ 3.0 GHz)

This is an Interlagos machine with 16 cores (numa 4 nodes with 4 cores each). Each core has 4 GB of memory, which results in the memory of machine to be 64GB. I compiled the code with open64 compiler. It is noteworthy that gcc compiler gives about half of the bandwidth as open64, while intel compiler results on this machine vary (64GB to 40 GB). "numactl --hardware" produces:

available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3
node 0 size: 16382 MB
node 0 free: 2930 MB
node 1 cpus: 4 5 6 7
node 1 size: 16384 MB
node 1 free: 5082 MB
node 2 cpus: 8 9 10 11
node 2 size: 16384 MB
node 2 free: 2281 MB
node 3 cpus: 12 13 14 15
node 3 size: 16368 MB
node 3 free: 550 MB
node distances:
node   0   1   2   3
  0:  10  16  16  16
  1:  16  10  16  16
  2:  16  16  10  16
  3:  16  16  16  10

Following table describes memory bandwidth on a single node by varying number of threads:

Number of threads	Bandwidth (GB/s)
1	14.0
2	15.0
3	17.8
4	18.5

Again, similar to the Intel machine, the maximum number of threads we need to run on each node is four.

Following table describes the effect of variation of memory allocation with respect to the processors where the threads are running on the memory bandwidth(number of threads is four):

MEM CPU	0	1	2	3
0	18.1	11.8	6.5	5.6
1	11.8	18.7	5.5	6.5
2	6.5	5.5	18.5	11.6
3	5.6	6.5	11.8	18.5

Contrary to the Intel machine, the above table does not agree with the "node distance" produced by the "numactl --hardware"!

AMD (4 x 6378 @ 2.4 GHz)

In NUMA terminology, this server has 8 nodes with 8 cores on each.

numactl --hardware  

available: 8 nodes (0-7)
node 0 cpus: 0 1 2 3 4 5 6 7
node 0 size: 32765 MB
node 0 free: 29324 MB
node 1 cpus: 8 9 10 11 12 13 14 15
node 1 size: 32768 MB
node 1 free: 31892 MB
node 2 cpus: 16 17 18 19 20 21 22 23
node 2 size: 32768 MB
node 2 free: 31900 MB
node 3 cpus: 24 25 26 27 28 29 30 31
node 3 size: 32768 MB
node 3 free: 31911 MB
node 4 cpus: 32 33 34 35 36 37 38 39
node 4 size: 32768 MB
node 4 free: 31964 MB
node 5 cpus: 40 41 42 43 44 45 46 47
node 5 size: 32768 MB
node 5 free: 31942 MB
node 6 cpus: 48 49 50 51 52 53 54 55
node 6 size: 32768 MB
node 6 free: 31866 MB
node 7 cpus: 56 57 58 59 60 61 62 63
node 7 size: 32752 MB
node 7 free: 31960 MB
node distances:
node   0   1   2   3   4   5   6   7
  0:  10  16  16  22  16  22  16  22
  1:  16  10  22  16  22  16  22  16
  2:  16  22  10  16  16  22  16  22
  3:  22  16  16  10  22  16  22  16
  4:  16  22  16  22  10  16  16  22
  5:  22  16  22  16  16  10  22  16
  6:  16  22  16  22  16  22  10  16
  7:  22  16  22  16  22  16  16  10

Memory bandwidth on a single node by varying number of threads:

Number of threads	Bandwidth (GB/s)
1	13.0
2	14.1
3	17.1
4	17.4
5	17.1
6	16.7
7	16.6
8	16.1

Following table describes the variation of memory bandwidth when we change memory allocation with respect to the cores where threads are running (Number of threads=4)

MEM CPU	0	1	2	3	4	5	6	7
0	17.3	8.0	5.6	4.1	5.7	4.1	5.5	4.0
1	8.2	17.6	6.5	6.5	4.0	5.5	4.0	5.4
2	5.7	6.5	17.9	7.9	5.6	4.1	5.6	4.1
3	4.1	6.5	8.1	17.8	4.1	5.6	4.1	5.7
4	5.6	4.0	5.7	4.2	17.7	7.9	5.7	4.1
5	4.0	5.6	4.1	5.6	8.1	17.7	4.0	5.5
6	5.4	4.0	5.6	4.1	5.7	4.1	17.8	7.9
7	3.9	5.4	4.0	5.6	4.2	5.6	8.1	17.7

Bandwidth in terms of Socket

A socket for AMD 6200 and 6300 machine is two NUMA nodes combined together. The sockets have 16 cores for the 6378 server while 8 cores for 6220 server. The memory bandwidth for each NUMA node is maximum with about 4 threads, and we wonder what is the maximum bandwidth for a socket. A reasonable guess from our previous results is to use 8 threads for the socket with 4 distributed over each NUMA node. If we run the stream with 8 cores as follows:

numactl --physcpubind=0,1,2,3,8,9,10,11 --membind=0,1 ./stream

we get 34.7 GB/s memory bandwidth.

By running,

numactl --physcpubind=0,2,4,6,8,10,12,14 --membind=0,1 ./stream

also yields 35 GB/s bandwidth.

By varying the membind to different sockets as follows:

numactl --physcpubind=0,2,4,6,8,10,12,14 --membind=0,1 ./stream
numactl --physcpubind=0,2,4,6,8,10,12,14 --membind=2,3 ./stream
numactl --physcpubind=0,2,4,6,8,10,12,14 --membind=4,5 ./stream
numactl --physcpubind=0,2,4,6,8,10,12,14 --membind=6,7 ./stream
numactl --physcpubind=16,18,20,22,24,26,28,30 --membind=0,1 ./stream
numactl --physcpubind=16,18,20,22,24,26,28,30 --membind=2,3 ./stream
numactl --physcpubind=16,18,20,22,24,26,28,30 --membind=4,5 ./stream
numactl --physcpubind=16,18,20,22,24,26,28,30 --membind=6,7 ./stream
numactl --physcpubind=32,34,36,38,40,42,44,46 --membind=0,1 ./stream
numactl --physcpubind=32,34,36,38,40,42,44,46 --membind=2,3 ./stream
numactl --physcpubind=32,34,36,38,40,42,44,46 --membind=4,5 ./stream
numactl --physcpubind=32,34,36,38,40,42,44,46 --membind=6,7 ./stream
numactl --physcpubind=48,50,52,54,56,58,60,62 --membind=0,1 ./stream
numactl --physcpubind=48,50,52,54,56,58,60,62 --membind=2,3 ./stream
numactl --physcpubind=48,50,52,54,56,58,60,62 --membind=4,5 ./stream
numactl --physcpubind=48,50,52,54,56,58,60,62 --membind=6,7 ./stream

we get following table (In terms of socket, i.e. node 0-1 is socket 1, node 2-3 is socket 2 and so on)

MEM CPU	1	2	3	4
1	35.2	11.2	11.0	10.7
2	11.3	35.3	11.2	11.1
3	10.9	11.2	35.2	11.0
4	10.7	11.1	11.1	35.4

VASP

This page describes benchmarking of Vienna Ab-initio Simulation Package (VASP), a plane wave density functional theory code, used in studying electronic structure of materials.

Intel (2 x E5-2643 @ 3.30GHz)

Native FFT Library

Following libraries and flags were used:

MKLDIR    = $(HPC_MKL_DIR)
MKLLIBS   = -lmkl_intel_lp64 -lmkl_sequential -lmkl_core
MKLLIBDIR = $(HPC_MKL_DIR)/lib/intel64
FFTLIB = -lfftw3xf
INCS = -I$(MKLDIR)/include/fftw
FFT_OBJS = fftmpi.o fftmpi_map.o fftw3d.o fft3dlib.o
FFLAGS =  -free -names lowercase -assume byterecl
OFLAG  = -O2 -xsse2 -unroll-aggressive -warn general

As a first check, Streaming SIMD Extension (SSE) was changed and following is the result of a self consistent field (SCF) calculation for MgMOS (For input files, please ask Charles Taylor or Manoj Srivastava):

SIMD Instruction	Time(s)
sse2	158
sse4.1	156
sse4.2	155
avx	155
ssse3	156

There does not seem to be a significant impact of SSE sets on the run time of VASP.

MKL FFTs (via FFTW wrappers)

Upon profiling the code, we found that the code spent most of its time in the FFT libraries, so the next step was to change the FFT libraries. Following changes were made:

FFT_OBJS = fftmpi_map.o fftmpiw.o fftw3d.o fft3dlib.o

(The change here is replacement of "fftmpi.o" in the original VASP makefile with "fftmpiw.o")

MKLDIR    = $(HPC_MKL_DIR)
MKLLIBS   = -lmkl_intel_lp64 -lmkl_sequential -lmkl_core
MKLLIBDIR = $(HPC_MKL_DIR)/lib/intel64
FFTLIB = -lfftw3xf
INCS = -I$(MKLDIR)/include/fftw
FFLAGS = -free -names lowercase -assume byterecl
OFLAG  = -O2 -xsse2 -unroll-aggressive -warn general

Following table depicts the run time variation with SIMD instruction sets:

SIMD Instruction	Time(s)
sse2	97
sse4.1	95
sse4.2	94
avx	94
ssse3	94

In conclusion, upon making changes (using "fftmpiw.o" as opposed to "fftmpi.o"), a significant 60% improvement on the run time of the code was found on the Intel machine (E5-2643 @ 3.30GHz).

FFTW FFTs

We further compiled VASP by using FFT library from the FFTW package with following flags:

MKLDIR    = $(HPC_MKL_DIR)
MKLLIBS   = -lmkl_intel_lp64 -lmkl_sequential -lmkl_core
MKLLIBDIR = $(HPC_MKL_DIR)/lib/intel64
FFTWDIR = /apps/fftw/3.3.2
FFTLIB  = -L$(FFTWDIR)/lib -lfftw3
INCS = -I$(FFTWDIR)/include
FFT_OBJS = fftmpi_map.o fftmpiw.o fftw3d.o fft3dlib.o
FFLAGS =  -free -names lowercase -assume byterecl
OFLAG  = -O2 -xsse2 -unroll-aggressive -warn general

From our previous experience, we concluded that the performance of VASP did not depend substantially on the SIMD instruction sets, so for FFTW library, we only tried one set. Following is the result:

SIMD Instruction	Time(s)
sse2	118

We conclude that FFTs from MKL library are better than the ones from FFTW.

AMD (2 x 6220 @ 3.0 GHz)

This machine has 16 cores, in numactl terminology 4 NUMA nodes with 4 cores on each nodes. As the result of VASP depends heavily on the choice of FFT libraries, we checked performance of this machine with different FFTs, namely, FFT provided by VASP package, MKL, and FFTW. We built FFTW libraries with various flags to see if we could find a better choice for FFTs. The libraries and flags used to compile VASP are as follows (FFT libraries were changed depending on which FFT we wanted to use):

MKLDIR    = $(HPC_MKL_DIR)
MKLLIBS   = -lmkl_intel_lp64 -lmkl_sequential -lmkl_core
MKLLIBDIR = $(HPC_MKL_DIR)/lib/intel64
FFTWDIR = /apps/fftw/3.3.2
FFTLIB  = -L$(FFTWDIR)/lib -lfftw3
INCS = -I$(FFTWDIR)/include
FFT_OBJS = fftmpi_map.o fftmpiw.o fftw3d.o fft3dlib.o
FFLAGS =  -free -names lowercase -assume byterecl
OFLAG  = -O2 -xsse2 -unroll-aggressive -warn general

From the computer architecture point of view, the bulldozer core aka module of AMD server lies in between a true dual core processor and a single core processor with simultaneous multithreading capability. The cores on AMD servers share some of the resources such as L2 cache and floating point unit (FPU), so the performance of a code would get affected if the threads are run on the shared cores or exclusive cores. For detail information about bulldozer core, please have a look at http://en.wikipedia.org/wiki/Bulldozer_%28microarchitecture%29

The results are summarized in the following table (8 processor runs):

Run Scheme	Native	MKL	FFTW	FFTW	FFTW	FFTW	FFTW	FFTW
Shared time(s)	399	261	333	319	334	336	315	319
Exclusive time (s)	274	159	217	219	215	217	213	211
Notes	-	-	1	2	3	4	5	6

In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.

You can clearly see the effect of FPU sharing on the server for all the FFT libraries. Also, similar to the Intel servers, FFT from the MKL libraries work better as opposed to any other libraries.

¹ Default compiler Flags were used to build FFT.
² CFLAGS=-O3, FFLAGS=-O3, -enable sse2
³ enable-mpi CFLAGS=-O3, FFLAGS=-O3, -enable sse2
⁴ CC='opencc -march=bdver1' F77='openf90 -march=bdver1' CFLAGS='-msse3 -msse4.1 -msse4.2 -msse4a -mfma4 -O2' FFLAGS='-msse3 -msse4.1 -msse4.2 -msse4a -mfma4 -O2' --enable-fma --enable-mpi
⁵ FFLAGS/ CFLAGS="-OPT:Ofast -mavx -mfma4 -march=bdver1 -O3 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns -ffast-math"
⁶ ufhpc compiler options. FFTWDIR = /apps/fftw/3.3.2

Performance Comparison

Following is a summary of results for the test case of MgMOS ran on the Intel and AMD servers with 8 processors.

Server	Native	MKL	FFTW
Intel	158	97	118
Intel (Scaled)	174	106	130
AMD (Shared)	399	261	319
AMD (Exclusive)	274	159	211
AMD Shared/AMD Exc.	1.46	1.64	1.51
AMD Exc./Intel (scaled)	1.57	1.50	1.62
Notes	-	-	1

In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.

In summary--

1. VASP runs better (~1.5x) on the Intel server than the AMD server, even with the interleaved cores.

2. FPU sharing reduces the efficiency on the AMD server to 1.5x.

3. FFTs from MKL are better builds.

¹ Compiled by UFHPC (Charles Taylor or Craig Prescott)

LAMMPS

Scaling with Number of Processors

LAMMPS is compiled with the following flags:

module load intel openmpi
CC = mpiCC
CCFLAGS = -O2 -xsse2
FFT_INC =  -I$(HPC_MKL_DIR)/include/fftw
FFT_PATH =
FFT_LIB = -L$(HPC_MKL_DIR)/lib/intel64 -lfftw3xc -lmkl_intel_lp64 -lmkl_sequential -lmkl_core

The benchmarking runs are done by the input file provided with the package. (LJ = atomic fluid, Lennard-Jones potential with 2.5 sigma cutoff (55 neighbors per atom), NVE integration). Following table describes the variation of run time with number of processors on the Intel server:

# processors	Time(s)
8	158
4	309
1	1139

We find linear scaling with number of processors on the intel machine.

We also ran the "lj" benchmark on the AMD server (for comparison, we provide results on the Intel server as well):

# processors	lj Time(s)	chain Time(s)	eam Time(s)	rhodo Time(s)	Notes
16	180	84	476	2877	-
8	329	149	908	5506	-
4	547	248	1509	9398	-
1	1651	724	4708	-	-
Intel (8 proc)	158	67	396	2361	1
Scaled Intel (8 proc)	217	92	545	3246	2
Scaled Intel(8 proc)/ AMD (16 proc)	1.20	1.15	1.14	1.13	3

For all the test cases, runs on the Intel servers( 8 threads) are slower than AMD servers (16 threads) by about 15%.

¹ Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz
² Scaling was done by the factor of 3.3/2.4=1.375
³ Comparison of 8 processors run on Intel vs 16 processors run on AMD

Comparison of Intel, Open64 and GNU Builds

LAMMPS with Intel compiler:

module load intel openmpi
CC = mpiCC
CCFLAGS = -O2 -msse2
FFT_INC = -I$(HPC_MKL_DIR)/include/fftw
FFT_PATH =
FFT_LIB = -L$(HPC_MKL_DIR)/lib/intel64 -lfftw3xc -lmkl_intel_lp64 -lmkl_sequential -lmkl_core

LAMMPS with open64 compiler:

module load open64/.4.5.2 openmpi
CC = mpiCC
CCFLAGS = -O2 -msse2
MPI_DIR = /usr/mpi/open64/openmpi-1.6
MPI_INC = -I$(MPI_DIR)/include
MPI_LIB = -L$(MPI_DIR)/lib64 -lmpi
MPI_PATH =
FFT_DIR = /home/manoj/FFTW/charlie/3.3.2
FFT_INC = -I$(FFT_DIR)/include/fftw3
FFT_PATH = 
FFT_LIB = -L$(FFT_DIR)/lib -lfftw3

LAMMPS with gnu compiler:

module load gcc/.4.7.2 openmpi
CC = g++
CCFLAGS = -O2 -msse2
MPI_DIR = /usr/mpi/gnu/openmpi-1.6
MPI_INC = -I$(MPI_DIR)/include
MPI_LIB = -L$(MPI_DIR)/lib64 -lmpi -lmpi_cxx
MPI_PATH =
FFT_DIR = /home/manoj/FFTW/gnu/3.3.2
FFT_INC = -I$(FFT_DIR)/include/fftw3
FFT_PATH = 
FFT_LIB = -L$(FFT_DIR)/lib -lfftw3

For testing, we only ran "lj" benchmark and found:

Compiler	Intel Time(s)	Intel Time(s)	AMD Time(s)	AMD Time(s)
Intel	158	151	329	321
Open64	173	-	352	337
GNU	152	145	341	320
NOTES	1	2	1,3	2,3

¹ Basic Flags:
Intel: -O2 -msse2
Open64: -O2 -msse2
GNU: -O2 -msse2

² Fancy Flags:
Intel: -O2 -mavx -unroll-aggresive -ipo -opt-prefetch -use-intel-optimized-headers
Open64: CCFLAGS =-OPT:Ofast -mavx -mfma4 -march=bdver1 -O2 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns -ffast-math
GNU: CCFLAGS= -O2 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-pre -ftree-vectorize

³ Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit)

Intel (2 x E5-2643 @ 3.30GHz)

Intel Compiler and SIMD Sets

We used Intel compiler as follows:

module load intel openmpi
CC = mpiCC
CCFLAGS = -O2 -xSSE2
FFT_INC =  -I$(HPC_MKL_DIR)/include/fftw
FFT_PATH =
FFT_LIB = -L$(HPC_MKL_DIR)/lib/intel64 -lfftw3xc -lmkl_intel_lp64 -lmkl_sequential -lmkl_core

Following table shows variation of Streaming SIMD Extension (SSE) sets(# threads=8):

Extension set	Time(s)
sse2	158
sse3	157
ssse3	157
sse4.1	158
sse4.2	157
avx	152

"avx" instruction set is slightly better than the other sets!

The binaries for the above SIMD sets use "-x" option for the build, which does not work for the instruction sets other than "-sse2" on the AMD server, so for the next step we build our binaries with "-m" option and run it on the intel and AMD servers to see whether we could successfully run the binaries on both servers. Following table demonstrates the result for the "lj" benchmark:

SIMD Instruction	Intel Time(s)	AMD Time(s)
sse2	158	329
sse3	157	329
ssse3	157	329
sse4.1	158	330
sse4.2	157	329
avx	152	319
Notes	-	1

¹ Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit).

Clearly on both, Intel as well as AMD servers, "avx" instructions are better choice for the "lj" benchmark. We ran other benchmarks for the SIMD sets:

SIMD Instruction	chain		eam		rhodo
-	Intel	AMD	Intel	AMD	Intel	AMD
sse2	67	149	396	908	2361	5506
sse3	67	149	398	908	2355	5486
ssse3	66	149	399	907	2359	5485
sse4.1	68	148	395	908	2351	5420
sse4.2	66	148	396	909	2346	5479
avx	65	145	387	897	2290	5360
Notes	-	1	-	1	-	1

For all the benchmarks, "avx" seems to be a better choice compared to other instruction sets.

¹ Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit).

MKL vs FFTW FFTs

We profiled the code to see where does it spend most of its time. Below is a summary of all the time spent in the FFTs for all the benchmarks that we tried.

lj:

time   seconds   seconds    calls   s/call   s/call  name
0.00    185.61     0.00        1     0.00     0.00  LAMMPS_NS::FFT3d::timing1d(double*, int, int)
0.00    185.61     0.00        1     0.00     0.00  fft_1d_only

chain:

time   seconds   seconds    calls   s/call   s/call  name
0.00     70.62     0.00        1     0.00     0.00  LAMMPS_NS::FFT3d::timing1d(double*, int, int)
0.00     70.62     0.00        1     0.00     0.00  fft_1d_only

eam:

time   seconds   seconds    calls   s/call   s/call  name
0.00    381.72     0.00        1     0.00     0.00  LAMMPS_NS::FFT3d::timing1d(double*, int, int)
0.00    381.72     0.00        1     0.00     0.00  fft_1d_only

rhodo:

time   seconds   seconds    calls   s/call   s/call  name
0.81    118.18     1.04 10423040     0.00     0.00  kf_work(FFT_DATA*, FFT_DATA const*, unsigned long, int, int*, kiss_fft_state*)
0.72    119.10     0.92 31269120     0.00     0.00  kf_bfly4(FFT_DATA*, unsigned long, kiss_fft_state*, unsigned long)

We can clearly see that the code does not spend any significant time in the FFT routines for any benchmarks. So, if we change the FFT from MKL to FFTW, it should not change the performance at all. As a check, we built LAMMPS with FFTW FFTs using:

module load intel openmpi fftw
CC = mpiCC
CCFLAGS = -O2 -mavx
FFT_DIR = /apps/fftw/3.3.2
FFT_INC = -I$(FFT_DIR)/include/fftw3
FFT_PATH = 
FFT_LIB = -L$(FFT_DIR)/lib -lfftw3

For the test, we ran "lj" benchmark on the Intel server and found:

FFT	Time(s)
MKL	152
FFTW	152

As expected, there is no difference between the FFTs from FFTW or MKL on the performance of LAMMPS.

AMD (4 x 6378 @ 2.4 GHz)

In this section, we descirbe the effect of shared FPUs and cache of the AMD server on the performance of LAMMPS. The results are summarized in the following table (# threads=8):

Run Scheme	lj	chain	eam	rhodo
Shared time(s)	319	145	897	5360
Exclusive time (s)	277	126	778	4426

In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.

Performance Comparison

Following is a table for performance comparison of Intel and AMD servers when the job was run using 8 threads.

Server	lj	chain	eam	rhodo
Intel	158	65	387	2290
Intel (Scaled)	217	89	532	3149
AMD (Shared)	319	145	897	5360
AMD (Exclusive)	277	126	778	4426
AMD Shared/AMD Exc.	1.15	1.15	1.15	1.21
AMD Exc./Intel (scaled)	1.28	1.42	1.46	1.41

In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.

In summary--

1. LAMMPS runs better (~1.3-1.5X) on the Intel server than the AMD server, even with the interleaved cores.

2. FPU sharing reduces the efficiency on the AMD server to 1.2X.

GROMACS

Comparison of Intel, Open64 and GNU Builds

Intel compiler:

module load intel openmpi
export F77=mpif77
export F90=mpif90
export CC=mpicc
export CFLAGS="-O2 -msse2"
export FFLAGS="-O2 -msse2"
./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float --with-fft=mkl LIBS="-L/opt/intel/composerxe
/lib/intel64 -lfftw3xc -lmkl_intel_lp64 -lmkl_sequential -lmkl_core"
make
make install

Open64 compiler:

module load open64/.4.5.2 openmpi
export F77=openf90
export F90=openf90
export CC=opencc
export CFLAGS="-O2 -msse2"
export FFLAGS="-O2 -msse2"
export CPPFLAGS="-I/home/manoj/FFTW/fpic-charlie/3.3.2/include"
export LDFLAGS="-L/home/manoj/FFTW/fpic-charlie/3.3.2/lib"
./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float
make
make install

GNU compiler:

module load gcc/.4.7.2 openmpi
export F77=gfortran
export F90=f95
export CC=gcc
export CFLAGS="-O2 -msse2"
export FFLAGS="-O2 -msse2"
export CPPFLAGS="-I/home/manoj/FFTW/gnu/3.3.2/include"
export LDFLAGS="-L/home/manoj/FFTW/gnu/3.3.2/lib"
./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float
make
make install

There are some test cases in "gromacs-4.5.5/share/tutor" directory, however not all of them work. So far, I could only get "water", "methane", and "mixed" to work. Instructions to run MD simulations are on http://manual.gromacs.org/online/water.html page. You first need to create a " .tpr" file using

./grompp_d -v

After this, you can run "mdrun_d" for the molecular dynamics simulation.

In the input file provided by GROMACS, there is a mistake in the "grompp.mdp" file. The line starting with "bd-temp" has to be commented out. Upon some internet search, I found that the file, "grompp.mdp" is the input file for an older version of GROMACS, and apparently some of the parameters have become obsolete.

Following results are for the MD simulation on water using 8 processors on Intel (E5-2643) and AMD (Opetran-6378) servers:

Compiler	Intel Time(s)	Intel Time(s)	AMD Time(s)	AMD Time(s)
Intel	157	157	361	363
Open64	167	-	392	383
GNU	160	-	377	368
NOTES	1	2	1,3	2,3

¹ Basic Flags:
Intel: -O2 -msse2
Open64: -O2 -msse2
GNU: -O2 -msse2

² Fancy Flags:
Intel: -O2 -mavx -unroll-aggresive -opt-prefetch -use-intel-optimized-headers
Open64: CCFLAGS =-OPT:Ofast -mavx -mfma4 -march=bdver1 -O2 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns
GNU: CCFLAGS= -O2 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-pre -ftree-vectorize

³ Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit)

Scaling with Number of Processors

"Water" benchmark was run using gromacs compiled with the intel and openmpi (fancy flags) as shown on above section.

Following table describes the variation of run time with number of processors on the Intel (E5-2643) server:

# processors	Time(s)	Factor
1	950	1.00
4	252	3.76
8	157	6.05

We find linear scaling with number of processors on the intel server.

We also ran the same benchmark on the AMD (Opetran-6378) server (for comparison, we provide results on the Intel server as well):

# processors	water Time(s)	Notes
16	241	-
8	363	-
4	532	-
1	1288	-
Intel (8 proc)	157	1
Scaled Intel (8 proc)	216	2
AMD (16 proc)/ Scaled Intel(8 proc)	1.12	3

¹ Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz
² Scaling was done by the factor of 3.3/2.4=1.375
³ Comparison of 8 processors run on Intel vs 16 processors run on AMD

Instruction Set Dependence

GROMACS is compiled with the following flags:

module load intel openmpi mkl
export F77=mpif77
export F90=mpif90
export CC=mpicc
export CFLAGS="-O2 -msse2 -unroll-aggresive -opt-prefetch -use-intel-optimized-headers"
export FFLAGS="-O2 -msse2 -unroll-aggresive -opt-prefetch -use-intel-optimized-headers"
./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float --with-fft=mkl LIBS="-L/opt/intel
/composerxe/lib/intel64 -lfftw3xc -lmkl_intel_lp64 -lmkl_sequential -lmkl_core"
make
make install

Table captures the dependence of instruction sets on Intel (E5-2643) and AMD (Opetran-6378) machine with 8 processes:

SIMD Instruction	Intel	AMD
sse2	158	364
sse3	158	362
ssse3	157	362
sse4.1	159	360
sse4.2	157	362
avx	157	363
Notes	-	1

GROMACS seems to be instruction set independent.
¹ Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit)

MKL vs FFTW

There is a problem in profiling the code. We don't see as many subroutines as we wish to see. Intel compiler is still OK, but GNU compiler is worse: it only shows only one subroutine. We don't see any FFT routine in the test case that we are using.

Intel Compiler

time    seconds   seconds    calls   s/call   s/call  name
68.42      0.13     0.13        6    21.67    28.33  do_md
15.79      0.16     0.03  2160054     0.00     0.00  copy_rvec
 5.26      0.17     0.01   600018     0.00     0.00  clear_mat
 5.26      0.18     0.01                             _intel_fast_memcpy
 5.26      0.19     0.01                             _intel_fast_memcpy.P
 0.00      0.19     0.00   720018     0.00     0.00  copy_mat
 0.00      0.19     0.00        6     0.00    28.33  mdrunner
 0.00      0.19     0.00        3     0.00     0.00  copy_rvec
 0.00      0.19     0.00        1     0.00     0.00  copy_mat
 0.00      0.19     0.00        1     0.00     0.00  get_nthreads
 0.00      0.19     0.00        1     0.00     0.00  mdrunner_start_threads

GNU Compiler

time     seconds   seconds    calls   s/call   s/call  name
100.01     0.02     0.02        1    20.00    20.00  do_md

To see the FFT dependence, we built GROMACS with FFTW FFTs using:

module load intel openmpi fftw
export F77=mpif77
export F90=mpif90
export CC=mpicc
export CFLAGS="-O2 -mavx -unroll-aggresive -opt-prefetch -use-intel-optimized-headers"
export FFLAGS="-O2 -mavx -unroll-aggresive -opt-prefetch -use-intel-optimized-headers"
#export CFLAGS="-O2 -msse2" 
#export FFLAGS="-O2 -msse2" 
export CPPFLAGS="-I/apps/fftw/3.3.2/include"
export LDFLAGS="-L/apps/fftw/3.3.2/lib -lfftw3"
./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float
make
make install

We ran "water" benchmark on the Intel(E5-2643) and AMD (Opetran-6378) servers using 8 processors and found:

FFT	Intel Time(s)	AMD Time(s)
MKL	157	363
FFTW	157	360

There seems to be no difference between the FFTs from FFTW or MKL on the performance of GROMACS.

Shared vs Exclusive run on AMD servers (4 x 6378 @ 2.4 GHz)

We descirbe the effect of shared FPU and L2-cache of the AMD server. The results are summarized in the following table (# processes=8):

Run Scheme	Time(s)
Shared time(s)	363
Exclusive time (s)	266

In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.

Performance Comparison

Following is a table for performance comparison of Intel and AMD servers when the job was run using 8 processors:

Server	Time(s)	Notes
Intel	157	1
Intel (Scaled)	216	2
AMD (Shared)	363	3
AMD (Exclusive)	266	4
AMD Shared/AMD Exc.	1.36	-
AMD Exc./Intel (scaled)	1.23	-

¹ Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz
² Scaling was done by the factor of 3.3/2.4=1.375
³ "Shared" represents cores that share resources such as L2-Cache and FPU
⁴ "Exclusive" represents cores that don't share resources such as L2-Cache and FPU

DL_POLY

Comparison of Intel, Open64 and GNU Builds

Intel compiler:

module load intel openmpi
$(MAKE) LD="mpif90 -v -o " \
                LDFLAGS="-shared-intel" \
                FC="mpif90 -c" \
                FCFLAGS="-O3 -mavx -opt-prefetch -use-intel-optimized-headers" \
                EX=$(EX) BINROOT=$(BINROOT) $(TYPE)

GNU compiler:

module load gcc/.4.7.2 openmpi
$(MAKE) LD="mpif90 -v -o " \
                LDFLAGS=" " \
                FC="mpif90 -c" \
                FCFLAGS="-O3 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-                 
                pre -ftree-vectorize" \
                EX=$(EX) BINROOT=$(BINROOT) $(TYPE)

Open64 compiler:

Open64 shows a problem in the subroutine config_module.f90 at line 62. This subroutine resizes the length of an array. The line

Character( Len = * ), Allocatable, Intent( InOut ) :: a(:)

makes "a" an allocatable array of strings, but the length of string is not defined. Intel and GNU compiler can handle this, however the open64 compiler can not. We made one assignment modification at this line (Interested readers should look up the code) and made the open64 compiler work.

 
 module load open64/.4.5.2 openmpi
 $(MAKE) LD="mpif90 -v -o " \
                LDFLAGS=" " \
                FC="mpif90 -c" \
                FCFLAGS="-OPT:Ofast -mavx -mfma4 -march=bdver1 -O2 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns -ffast-math " \
                EX=$(EX) BINROOT=$(BINROOT) $(TYPE)

We downloaded 42 benchmarks from the DL_POLY website. The number of benchmarks are higher so we looked in to the result of profiling and found that there are in fact only 15 cases that use different codes inside the DL_POLY package and we are going to present our results based on those.

Following results are for the various benchmarks using 8 processors on Intel (E5-2643) servers:

**Wall Time**
Compiler	Intel-Basic Time(s)	Intel-Fancy Time(s)	GNU-Basic Time(s)	GNU-Fancy Time(s)	Open64-Basic Time(s)
Test1	66	62	71	83	75
Test3	69	65	76	75	79
Test4	74	87	77	78	87
Test5	70	65	81	75	87
Test7	95	88	105	99	106
Test9	67	57	85	69	117
Test11	72	61	85	83	91
Test13	63	58	65	62	72
Test14	106	114	113	136	91
Test17	67	65	74	72	77
Test18	102	89	104	99	115
Test27	136	131	154	-	158
Test31	114	96	121	121	134
Test35	80	81	90	90	93

**CPU Time**
Compiler	Intel-Basic Time(s)	Intel-Fancy Time(s)	GNU-Basic Time(s)	GNU-Fancy Time(s)	Open64-Basic Time(s)
Test1	65	60	-	-	74
Test3	68	64	-	-	79
Test4	70	64	-	-	79
Test5	61	59	-	-	86
Test7	88	84	-	-	104
Test9	59	57	-	-	116
Test11	72	60	-	-	90
Test13	57	56	-	-	67
Test14	39	42	-	-	43
Test17	64	63	-	-	75
Test18	94	88	-	-	112
Test27	136	116	-	-	157
Test31	113	94	-	-	134
Test35	80	80	-	-	92

From above table, we conclude that intel build with fancy flags is better choice for the code.

We tried to compare intel and open64 builds on the AMD server and following table depicts that comparison:

**Wall Time**
Compiler	Intel-Fancy Time(s)	Open64-Basic Time(s)	Open64-Fancy Time(s)
Test1	95	91	90
Test3	221	235	219
Test4	213	225	211
Test5	142	173	161
Test7	300	310	295
Test9	144	219	209
Test11	158	202	183
Test13	247	262	245
Test14	186	165	149
Test17	190	201	189
Test18	356	353	385
Test27	323	377	334
Test31	269	313	290
Test35	228	251	240

**CPU Time**
Compiler	Intel-Fancy Time(s)	Open64-Basic Time(s)	Open64-Fancy Time(s)
Test1	91	90	90
Test3	219	233	218
Test4	204	218	203
Test5	141	171	160
Test7	298	309	293
Test9	137	219	207
Test11	157	202	183
Test13	245	259	242
Test14	149	147	143
Test17	189	201	189
Test18	348	350	*383
Test27	323	370	332
Test31	268	312	290
Test35	227	251	239

¹ Basic Flags:
Intel: -O2 -msse2
Open64: -O2 -msse2
GNU: -O2 -msse2

² Fancy Flags:
Intel: -O2 -mavx -opt-prefetch -use-intel-optimized-headers
GNU: CCFLAGS= -O2 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-pre -ftree-vectorize
Open64 -OPT:Ofast -mavx -mfma4 -march=bdver1 -O2 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns -ffast-math

More studies on Test 14

intel compiler:

Intel server: CPU time = 39s, Wall Time= 49s

 %   cumulative   self              self     total
time   seconds   seconds    calls   s/call   s/call  name
13.56      4.85     4.85      182     0.03     0.03  constraints_shake_vv_
 9.09      8.10     3.25       14     0.23     0.27  link_cell_pairs_
 7.94     10.94     2.84       78     0.04     0.04  deport_atomic_data_
 5.65     12.96     2.02                             __intel_ssse3_rep_memcpy
 5.56     14.95     1.99       14     0.14     0.14  ewald_spme_forces_IP_spme_forces_
 5.29     16.84     1.89       14     0.14     0.63  ewald_spme_forces_

AMD server: CPU Time=151s Wall Time =190s

 %   cumulative   self              self     total
time   seconds   seconds    calls   s/call   s/call  name
19.85     23.87    23.87       91     0.26     0.27  constraints_shake_vv_
12.33     38.70    14.83       78     0.19     0.19  deport_atomic_data_
 6.82     46.90     8.20       13     0.63     0.64  constraints_rattle_
 6.06     54.19     7.29       14     0.52     0.60  link_cell_pairs_
 5.61     60.94     6.75     3836     0.00     0.00  gpfa_module_mp_gpfa3f_
 5.32     67.34     6.40       14     0.46     0.46  bspgen_
 5.15     73.53     6.19       52     0.12     0.77  npt_b0_vv_

Open64 Compiler

Intel server: CPU Time= 45s, Wall Time=290s

 %   cumulative   self              self     total
time   seconds   seconds    calls   s/call   s/call  name
15.64      5.64     5.64      182     0.03     0.03  constraints_shake_vv__
12.06      9.99     4.35       14     0.31     0.69  ewald_spme_forces__
11.37     14.09     4.10       14     0.29     0.34  link_cell_pairs__
 9.45     17.50     3.41       78     0.04     0.04  deport_atomic_data__
 5.52     19.49     1.99  3378329     0.00     0.00  images_
 5.16     21.35     1.86     3808     0.00     0.00  GPFA2F.in.GPFA_MODULE
 5.16     23.21     1.86       26     0.07     0.07  constraints_rattle__

AMD server: CPU Time= 156s, Wall Time=164s

 %   cumulative   self              self     total
time   seconds   seconds    calls   s/call   s/call  name
18.38     22.58    22.58       91     0.25     0.25  constraints_shake_vv__
13.07     38.64    16.06       78     0.21     0.21  deport_atomic_data__
 8.29     48.82    10.18       14     0.73     2.73  ewald_spme_forces__
 7.54     58.09     9.27       14     0.66     0.76  link_cell_pairs__
 5.99     65.45     7.36       13     0.57     0.58  constraints_rattle__
 5.86     72.65     7.20     3836     0.00     0.00  GPFA3F.in.GPFA_MODULE
 5.34     79.21     6.56       14     0.47     0.47  bspgen_

Scaling with Number of Processors

From the data of the above section, we conclude that intel build with fancy flags is better choice for the code and so we do our further runs only using the intel build.

Following table describes the variation of run time with number of processors on the Intel (E5-2643) server:

#proc	Test1	Test3	Test4	Test5	Test7	Test9	Test11	Test13	Test14	Test17	Test18	Test27	Test31	Test35
1 (Factor)	91 (1.00)	389 (1.00)	541 (1.00)	511 (1.00)	502 (1.00)	755 (1.00)	397 (1.00)	292 (1.00)	255 (1.00)	302 (1.00)	445 (1.00)	651 (1.00)	612 (1.00)	-
4 (Factor)	90 (1.01)	122 (3.18)	160 (3.38)	119 (4.29)	173 (2.90)	119 (6.34)	119 (3.34)	116 (2.52)	147 (1.73)	105 (2.87)	147 (3.03)	229 (2.84)	184 (3.33)	136 (-)
8 (Factor)	62 (1.47)	65 (5.98)	87 (6.22)	65 (7.86)	88 (5.70)	57 (13.2)	61 (6.51)	58 (5.03)	114 (2.23)	65 (4.65)	89 (5.00)	131 (4.96)	96 (6.38)	81 (-)

Following table depicts the result in the scaled manner. It's basically the same table as above.

#proc	Test1	Test3	Test4	Test5	Test7	Test9	Test11	Test13	Test14	Test17	Test18	Test27	Test31	Test35
1	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	-
4	1.01	3.18	3.38	4.29	2.90	6.34	3.34	2.52	1.73	2.87	3.03	2.84	3.33	-
8	1.47	5.98	6.22	7.86	5.70	13.2	6.51	5.03	2.23	4.65	5.00	4.96	6.38	-

We also ran the same benchmark on the AMD (Opetran-6378) server (for comparison, we provide results on the Intel server as well):

#proc	Test1	Test3	Test4	Test5	Test7	Test9	Test11	Test13	Test14	Test17	Test18	Test27	Test31	Test35	Notes
1	91	395	619	788	1406	1292	825	393	441	882	898	651	651	-	-
4	102	362	375	277	521	285	307	376	267	318	497	554	477	381	-
8	95	221	213	142	300	144	158	247	186	190	356	323	269	228	-
16	90	127	112	78	167	74	90	170	116	145	193	192	152	170	-
Intel(8-proc)	62	65	87	65	88	57	61	58	114	65	89	131	96	81	1
Scaled Intel	85	89	120	89	121	78	84	80	157	89	122	180	132	111	2
AMD (16 proc)/ Intel(8 proc)	1.06	1.43	0.93	0.88	1.38	.95	1.07	2.14	0.74	1.63	1.58	1.07	1.15	1.53	3

Table for the scaling with respect to 1 processor runs:

#proc	Test1	Test3	Test4	Test5	Test7	Test9	Test11	Test13	Test14	Test17	Test18	Test27	Test31	Test35
1	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	-
4	0.89	1.09	1.65	2.84	2.70	4.53	2.69	1.05	1.65	2.77	1.81	1.18	1.36	-
8	0.96	1.79	2.91	5.55	4.69	8.97	5.22	1.59	2.37	4.64	2.52	2.02	2.42	-
16	1.01	3.11	5.53	10.1	8.42	17.46	9.17	2.31	3.80	6.08	4.65	3.39	4.28	-

There is wide variety of scaling. Some test cases scale linearly while others don't. The scaling is better on the Intel server as compared to the AMD server in most cases but in some cases they do show about the same scaling.

¹ Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz
² Scaling was done by the factor of 3.3/2.4=1.375
³ Comparison of 8 processors run on Intel vs 16 processors run on AMD

MKL vs FFTW FFTs

We profiled the code to see where does it spend most of its time. Below is a summary of the profile for all the benchmarks that we tried.

Test1:

Intel

time   seconds   seconds    calls   s/call   s/call  name
28.26      7.16     7.16   675309     0.00     0.00  vdw_forces_
25.57     13.64     6.48      201     0.03     0.03  link_cell_pairs_
17.72     18.13     4.49   675309     0.00     0.00  ewald_real_forces_
 7.22     19.96     1.83      201     0.01     0.01  ewald_spme_forces_IP_spme_forces_
 5.17     21.27     1.31      201     0.01     0.02  ewald_spme_forces_
 3.95     22.27     1.00      201     0.00     0.12  two_body_forces_
 3.83     23.24     0.97   675309     0.00     0.00  images_
 3.08     24.02     0.78      201     0.00     0.00  bspgen_
 1.42     24.38     0.36    11658     0.00     0.00  gpfa_module_mp_gpfa3f_
 1.07     24.65     0.27      202     0.00     0.00  shellsort2_
 0.67     24.82     0.17     1206     0.00     0.00  export_atomic_data_

AMD

time   seconds   seconds    calls   s/call   s/call  name
23.43     18.45    18.45  3379737     0.00     0.00  vdw_forces_
21.47     35.36    16.91     1000     0.02     0.02  link_cell_pairs_
14.23     46.57    11.21  3379737     0.00     0.00  ewald_real_forces_
11.77     55.84     9.27      500     0.02     0.02  bspgen_
 5.78     60.39     4.55     1000     0.00     0.00  ewald_spme_forces_IP_spme_forces_
 4.57     63.99     3.60     1000     0.00     0.02  ewald_spme_forces_
 4.36     67.42     3.43                             deport_atomic_data_
 3.34     70.05     2.63  3379737     0.00     0.00  images_
 2.76     72.22     2.17      500     0.00     0.14  two_body_forces_
 2.13     73.90     1.68                             spec_dexp2
 1.24     74.88     0.98    29000     0.00     0.00  gpfa_module_mp_gpfa3f_
 1.05     75.71     0.83      998     0.00     0.00  nvt_b0_vv_
 0.86     76.39     0.68      501     0.00     0.00  shellsort2_

Test3:

Intel

time   seconds   seconds    calls   s/call   s/call  name
17.53     26.21    26.21  1298431     0.00     0.00  vdw_forces_
14.82     48.37    22.16      201     0.11     0.13  link_cell_pairs_
14.22     69.62    21.25    26532     0.00     0.00  gpfa_module_mp_gpfa2f_
11.73     87.16    17.54  1298431     0.00     0.00  ewald_real_forces_
 6.62     97.06     9.90     1200     0.01     0.01  deport_atomic_data_
 4.04    103.10     6.04      201     0.03     0.21  ewald_spme_forces_
 3.80    108.78     5.68      200     0.03     0.03  constraints_shake_vv_
 3.37    113.82     5.04 43159044     0.00     0.00  local_index_
 3.32    118.79     4.97  2355005     0.00     0.00  images_
 3.06    123.36     4.57      200     0.02     0.03  constraints_rattle_
 2.99    127.82     4.47 326609967     0.00     0.00  match_
 2.57    131.66     3.84      201     0.02     0.02  ewald_spme_forces_IP_spme_forces_
 2.01    134.67     3.01      201     0.01     0.60  two_body_forces_
 1.10    136.32     1.65      201     0.01     0.01  parallel_fft_mp_forward_3d_fft_z_
 1.04    137.87     1.55      201     0.01     0.06  parallel_fft_mp_forward_3d_fft_y_
 0.98    139.33     1.46      201     0.01     0.01  bspgen_

AMD

time   seconds   seconds    calls   s/call   s/call  name
15.14     28.44    28.44  1299553     0.00     0.00  vdw_forces_
12.46     51.85    23.41      201     0.12     0.14  link_cell_pairs_
11.54     73.53    21.68    26532     0.00     0.00  gpfa_module_mp_gpfa2f_
 9.90     92.13    18.60  1299553     0.00     0.00  ewald_real_forces_
 7.30    105.85    13.72      200     0.07     0.07  constraints_rattle_
 7.01    119.03    13.18      200     0.07     0.07  constraints_shake_vv_
 6.23    130.73    11.70     1200     0.01     0.01  deport_atomic_data_
 3.69    137.66     6.93      201     0.03     0.03  bspgen_
 3.17    143.61     5.95      201     0.03     0.24  ewald_spme_forces_
 2.65    148.59     4.98  2367053     0.00     0.00  images_
 2.45    153.19     4.60 39319511     0.00     0.00  local_index_
 2.25    157.41     4.23 328218229     0.00     0.00  match_
 2.14    161.43     4.02      201     0.02     0.02  ewald_spme_forces_IP_spme_forces_
 1.81    164.84     3.41                             spec_dexp2
 1.59    167.82     2.98      201     0.01     0.66  two_body_forces_
 1.30    170.26     2.44      201     0.01     0.01  parallel_fft_mp_forward_3d_fft_z_
 0.80    171.76     1.50      201     0.01     0.01  parallel_fft_mp_back_3d_fft_x_

Test4:

Intel

time   seconds   seconds    calls   s/call   s/call  name
18.66     29.94    29.94  1604385     0.00     0.00  vdw_forces_
15.84     55.35    25.41       31     0.82     0.98  link_cell_pairs_
13.21     76.55    21.20  1604385     0.00     0.00  ewald_real_forces_
12.69     96.92    20.37       30     0.68     0.71  constraints_shake_vv_
 7.68    109.24    12.32       30     0.41     0.44  constraints_rattle_
 7.32    120.99    11.75      180     0.07     0.07  deport_atomic_data_
 3.79    127.07     6.08  2880181     0.00     0.00  images_
 3.23    132.25     5.18 40320168     0.00     0.00  local_index_
 3.10    137.22     4.98 364097691     0.00     0.00  match_
 2.72    141.58     4.36       31     0.14     0.14  ewald_spme_forces_IP_spme_forces_
 2.16    145.05     3.47       31     0.11     3.38  two_body_forces_
 2.05    148.34     3.29     4092     0.00     0.00  gpfa_module_mp_gpfa2f_
 1.95    151.47     3.13       31     0.10     0.42  ewald_spme_forces_
 0.67    152.54     1.07       31     0.03     0.03  bspgen_

AMD

time   seconds   seconds    calls   s/call   s/call  name
18.03     33.20    33.20  1603402     0.00     0.00  vdw_forces_
13.13     57.37    24.17       31     0.78     0.90  link_cell_pairs_
12.76     80.87    23.50       30     0.78     0.81  constraints_shake_vv_
11.25    101.59    20.72  1603402     0.00     0.00  ewald_real_forces_
 9.40    118.90    17.31       30     0.58     0.60  constraints_rattle_
 7.53    132.76    13.86      180     0.08     0.08  deport_atomic_data_
 3.27    138.78     6.02  2878846     0.00     0.00  images_
 2.65    143.65     4.87       31     0.16     0.16  bspgen_
 2.60    148.44     4.79 40437733     0.00     0.00  local_index_
 2.45    152.96     4.52                             spec_dexp2
 2.36    157.31     4.35       31     0.14     0.14  ewald_spme_forces_IP_spme_forces_
 2.07    161.13     3.82       62     0.06     1.77  two_body_forces_
 2.02    164.84     3.72 363897922     0.00     0.00  match_
 1.87    168.28     3.44       31     0.11     0.55  ewald_spme_forces_
 1.82    171.64     3.36     4092     0.00     0.00  gpfa_module_mp_gpfa2f_
 0.75    173.03     1.39      150     0.01     0.30  nve_0_vv_

Test5:

time   seconds   seconds    calls   s/call   s/call  name
44.99     50.53    50.53      101     0.50     0.50  three_body_forces_
16.21     68.74    18.21   873523     0.00     0.00  ewald_real_forces_
15.19     85.80    17.06      101     0.17     0.17  link_cell_pairs_
10.25     97.31    11.51   873523     0.00     0.00  vdw_forces_
 3.71    101.48     4.17   873523     0.00     0.00  images_
 3.33    105.22     3.74      101     0.04     0.59  two_body_forces_
 2.08    107.56     2.34      101     0.02     0.02  ewald_spme_forces_IP_spme_forces_
 1.41    109.14     1.58      101     0.02     0.05  ewald_spme_forces_
 0.97    110.23     1.09      101     0.01     0.01  bspgen_

Test7:

time   seconds   seconds    calls   s/call   s/call  name
16.97     13.50    13.50      101     0.13     0.15  link_cell_pairs_
16.75     26.82    13.32     1326     0.01     0.01  constraints_shake_vv_
11.59     36.04     9.22      600     0.02     0.02  deport_atomic_data_
10.69     44.54     8.50  1249646     0.00     0.00  ewald_real_forces_
10.59     52.96     8.42  1249646     0.00     0.00  vdw_forces_
 4.39     56.45     3.49  2122099     0.00     0.00  images_
 4.34     59.91     3.46 23122212     0.00     0.00  local_index_
 4.14     63.20     3.29      101     0.03     0.03  ewald_spme_forces_IP_spme_forces_
 3.34     65.86     2.66      200     0.01     0.11  npt_b0_vv_
 2.87     68.14     2.28      101     0.02     0.09  ewald_spme_forces_
 2.78     70.35     2.21      100     0.02     0.03  constraints_rattle_
 2.21     72.11     1.76      101     0.02     0.46  two_body_forces_
 1.89     73.61     1.51 154519604     0.00     0.00  match_
 1.85     75.08     1.47      101     0.01     0.01  bspgen_
 0.65     75.60     0.52      202     0.00     0.00  shellsort2_

Test9:

95.21     75.98    75.98      401     0.19     0.19  tersoff_forces_
 1.09     76.85     0.87     2400     0.00     0.00  deport_atomic_data_
 0.96     77.62     0.77      402     0.00     0.00  shellsort2_

Test11:

36.75     52.13    52.13  4004908     0.00     0.00  metal_forces_
22.05     83.41    31.28     1001     0.03     0.03  link_cell_pairs_
21.82    114.36    30.95  4004908     0.00     0.00  metal_ld_collect_fst_
10.26    128.91    14.55  8009816     0.00     0.00  images_
 2.59    132.59     3.68     1001     0.00     0.14  two_body_forces_
 2.44    136.05     3.46     1001     0.00     0.04  metal_ld_compute_
 1.35    137.97     1.92     1002     0.00     0.00  shellsort2_
 0.62    138.85     0.88     6000     0.00     0.00  deport_atomic_data_

Test13:

18.91     22.56    22.56    22348     0.00     0.00  gpfa_module_mp_gpfa2f_
12.43     37.39    14.83      900     0.02     0.02  deport_atomic_data_
11.80     51.47    14.08     1950     0.01     0.01  constraints_shake_vv_
 8.38     61.47    10.00      151     0.07     0.08  link_cell_pairs_
 5.49     68.02     6.55      300     0.02     0.09  npt_b0_vv_
 5.02     74.01     5.99      302     0.02     0.02  gpfa_module_mp_gpfa3f_
 4.86     79.81     5.80      151     0.04     0.33  ewald_spme_forces_
 4.38     85.04     5.23      151     0.03     0.04  ewald_spme_forces_IP_spme_forces_
 3.53     89.26     4.22 34695506     0.00     0.00  local_index_
 3.47     93.40     4.14      150     0.03     0.03  constraints_rattle_
 2.94     96.91     3.51  2364786     0.00     0.00  ewald_real_forces_
 2.84    100.30     3.39  4097851     0.00     0.00  images_
 2.36    103.11     2.81  2364786     0.00     0.00  vdw_forces_
 1.32    104.68     1.57      151     0.01     0.01  bspgen_
 1.27    106.19     1.51      151     0.01     0.01  parallel_fft_mp_forward_3d_fft_z_
 1.18    107.60     1.41      151     0.01     0.01  parallel_fft_mp_back_3d_fft_x_
 1.16    108.98     1.38      151     0.01     0.10  parallel_fft_mp_forward_3d_fft_y_
 1.14    110.34     1.36      151     0.01     0.48  two_body_forces_
 1.11    111.66     1.33 92125754     0.00     0.00  match_
 1.09    112.96     1.30      151     0.01     0.01  parallel_fft_mp_forward_3d_fft_x_
 0.99    114.14     1.18      151     0.01     0.10  parallel_fft_mp_back_3d_fft_y_

Test14:

21.33     16.80    16.80      130     0.13     0.13  constraints_shake_vv_
10.48     25.05     8.25       60     0.14     0.14  deport_atomic_data_
 7.24     30.75     5.70       11     0.52     0.60  link_cell_pairs_
 6.41     35.80     5.05     3014     0.00     0.00  gpfa_module_mp_gpfa3f_
 5.75     40.33     4.53       20     0.23     1.35  npt_b0_vv_
 5.30     44.50     4.17       10     0.42     0.43  constraints_rattle_
 5.27     48.65     4.15       11     0.38     2.20  ewald_spme_forces_
 5.13     52.69     4.04     2992     0.00     0.00  gpfa_module_mp_gpfa2f_
 4.28     56.06     3.37       11     0.31     0.31  ewald_spme_forces_IP_spme_forces_
 3.19     58.57     2.51 20333039     0.00     0.00  local_index_
 2.79     60.77     2.20  1534827     0.00     0.00  ewald_real_forces_
 2.78     62.96     2.19  2646191     0.00     0.00  images_
 2.30     64.77     1.81  1534827     0.00     0.00  vdw_forces_
 2.29     66.57     1.80       11     0.16     0.16  bspgen_
 1.92     68.08     1.51       22     0.07     0.07  gpfa_module_mp_gpfa5f_
 1.80     69.50     1.42       11     0.13     0.60  parallel_fft_mp_forward_3d_fft_y_
 1.79     70.91     1.41       11     0.13     0.60  parallel_fft_mp_back_3d_fft_y_
 1.09     71.77     0.86 57924127     0.00     0.00  match_
 0.95     72.52     0.75        1     0.75     0.75  dihedrals_14_check_

Test17:

20.71     10.65    10.65      201     0.05     0.06  link_cell_pairs_
13.88     17.79     7.14   984116     0.00     0.00  ewald_real_forces_
11.43     23.67     5.88   984116     0.00     0.00  vdw_forces_
 9.72     28.67     5.00     3200     0.00     0.00  constraints_shake_vv_
 6.68     32.11     3.44  2260717     0.00     0.00  images_
 5.84     35.11     3.01 23232840     0.00     0.00  local_index_
 5.06     37.71     2.60      201     0.01     0.01  ewald_spme_forces_IP_spme_forces_
 4.53     40.04     2.33      200     0.01     0.02  constraints_rattle_
 3.46     41.82     1.78      201     0.01     0.03  ewald_spme_forces_
 2.51     43.11     1.29     4235     0.00     0.00  pmf_coms_
 2.25     44.27     1.16 118620664     0.00     0.00  match_
 2.18     45.39     1.12     1200     0.00     0.00  deport_atomic_data_
 2.10     46.47     1.08      201     0.01     0.17  two_body_forces_
 2.10     47.55     1.08      201     0.01     0.01  bspgen_
 1.50     48.32     0.77      400     0.00     0.03  npt_b0_vv_
 1.11     48.89     0.57      402     0.00     0.00  shellsort2_
 0.80     49.30     0.41      201     0.00     0.00  pass_shared_units_

Test18:

34.45     69.38    69.38     1800     0.04     0.04  constraints_shake_vv_
 9.78     89.07    19.69      101     0.19     0.22  link_cell_pairs_
 8.63    106.45    17.38      100     0.17     0.20  constraints_rattle_
 6.61    119.77    13.32  2041857     0.00     0.00  ewald_real_forces_
 5.95    131.75    11.98  2041857     0.00     0.00  vdw_forces_
 5.38    142.59    10.84     2718     0.00     0.01  pmf_coms_
 5.29    153.24    10.65  4883071     0.00     0.00  images_
 4.95    163.22     9.98 66656800     0.00     0.00  local_index_
 3.18    169.62     6.40      200     0.03     0.60  npt_b0_vv_
 2.74    175.14     5.52      101     0.05     0.06  ewald_spme_forces_IP_spme_forces_
 1.84    178.84     3.70      101     0.04     0.16  ewald_spme_forces_
 1.71    182.28     3.44      600     0.01     0.01  deport_atomic_data_
 1.51    185.33     3.05      101     0.03     0.03  bspgen_
 1.44    188.24     2.91      101     0.03     0.74  two_body_forces_
 1.18    190.61     2.38 231279151     0.00     0.00  match_
 0.76    192.14     1.53    25304     0.00     0.00  update_shared_units_

Test27:

38.45     91.00    91.00 12076288     0.00     0.00  metal_forces_
24.32    148.56    57.56     3501     0.02     0.02  link_cell_pairs_
17.06    188.93    40.37 12076288     0.00     0.00  metal_ld_collect_eam_
 8.90    210.00    21.07 24152576     0.00     0.00  images_
 2.64    216.24     6.24     3501     0.00     0.06  two_body_forces_
 2.39    221.90     5.66     3501     0.00     0.02  metal_ld_compute_
 1.46    225.35     3.45     3502     0.00     0.00  shellsort2_
 1.11    227.98     2.63    21000     0.00     0.00  deport_atomic_data_
 0.90    230.11     2.13    21006     0.00     0.00  export_atomic_data_

Test31:

31.17     66.30    66.30 12004000     0.00     0.00  metal_forces_
29.18    128.38    62.08     3001     0.02     0.02  link_cell_pairs_
13.22    156.50    28.12 12004000     0.00     0.00  metal_ld_collect_eam_
10.09    177.96    21.46 24008000     0.00     0.00  images_
 5.35    189.35    11.39    18000     0.00     0.00  deport_atomic_data_
 2.99    195.71     6.36     3001     0.00     0.06  two_body_forces_
 2.77    201.60     5.89     3001     0.00     0.02  metal_ld_compute_
 1.29    204.34     2.75     3002     0.00     0.00  shellsort2_
 0.70    205.83     1.49     6000     0.00     0.00  npt_b0_vv_

Test35:

27.22     27.64    27.64      562     0.05     0.06  link_cell_pairs_
19.94     47.89    20.25  1878757     0.00     0.00  ewald_real_forces_
 9.75     57.79     9.90  1878757     0.00     0.00  vdw_forces_
 5.52     63.40     5.61  3227549     0.00     0.00  images_
 5.46     68.95     5.55     2008     0.00     0.00  constraints_shake_vv_
 4.44     73.46     4.51      562     0.01     0.01  ewald_spme_forces_IP_spme_forces_
 3.43     76.95     3.49 354007894     0.00     0.00  match_
 3.38     80.38     3.43      562     0.01     0.15  two_body_forces_
 3.30     83.73     3.35      562     0.01     0.01  bspgen_
 3.23     87.01     3.29 28441741     0.00     0.00  local_index_
 2.87     89.92     2.91      500     0.01     0.01  constraints_rattle_
 2.85     92.81     2.89      562     0.01     0.02  ewald_spme_forces_
 2.05     94.89     2.08     3366     0.00     0.00  deport_atomic_data_
 1.71     96.63     1.74     1124     0.00     0.00  shellsort2_
 1.44     98.09     1.46     1000     0.00     0.01  npt_m1_vv_
 0.49     98.59     0.50      562     0.00     0.00  set_halo_particles_

From the above data, we can clearly see that the FFT dependence of the code is very tiny (in some cases where it shows up, it's about a percent), so there is no need to try different FFT libraries for the purpose of efficiency.

Shared vs Exclusive run on AMD servers (4 x 6378 @ 2.4 GHz)

We descirbe the effect of shared FPU and L2-cache of the AMD server. The results are summarized in the following table (# processes=8):

Run Scheme	Test1	Test3	Test4	Test5	Test7	Test9	Test11	Test13	Test14	Test17	Test18	Test27	Test31	Test35
Shared time(s)	95	221	213	142	300	144	158	247	186	190	356	323	269	228
Exclusive time (s)	90	168	161	109	226	116	128	185	157	151	282	265	209	173

In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.

Performance Comparison

Following is a table for performance comparison of Intel and AMD servers when the job was run using 8 processors:

Server	Test1	Test3	Test4	Test5	Test7	Test9	Test11	Test13	Test14	Test17	Test18	Test27	Test31	Test35	Notes
Intel	62	65	87	65	88	57	61	58	114	65	89	131	96	81	1
Scaled Intel	85	89	120	89	121	78	84	80	157	89	122	180	132	111	2
AMD (Shared)	95	221	213	142	300	144	158	247	186	190	356	323	269	228	1,3
AMD(Exclusive)	90	168	161	109	226	116	128	185	157	151	282	265	209	173	1,4
AMD Shared/AMD Exc.	1.05	1.31	1.32	1.30	1.33	1.24	1.23	1.34	1.18	1.26	1.26	1.22	1.29	1.32	-
AMD Exc./Intel (scaled)	1.06	1.89	1.34	1.22	1.87	1.49	1.52	2.31	1.00	1.70	2.31	1.47	1.58	1.56	-
AMD Shared/Intel (scaled)	1.12	2.48	1.78	1.60	2.48	1.85	1.88	3.09	1.18	2.13	2.92	1.79	2.03	2.05	-
AMD (16 proc)/ Intel(8 proc)	1.06	1.43	0.93	0.88	1.38	.95	1.07	2.14	0.74	1.63	1.58	1.07	1.15	1.53	3

In summary--

1. In majority of cases, DL_POLY runs better (~1.2-2.3X) on the Intel server than the AMD server, even with the interleaved cores. However there are a few cases (test1 and test14) where there is negligible performance difference between both servers.

2. FPU sharing reduces the efficiency on the AMD server to 1.2-1.3X.

¹ Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz
² Scaling was done by the factor of 3.3/2.4=1.375
³ "Shared" represents cores that share resources such as L2-Cache and FPU
⁴ "Exclusive" represents cores that don't share resources such as L2-Cache and FPU

BLAST

A couple of things before we dive into the benchmarking-

1. NCBI-BLAST is not an MPI enabled code. Only parallelization that is available is intranode which can be achieved through OpenMP. If you would like parallel BLAST, MPIBLAST is an option but upon doing some internet search I found people reporting it to be unstable.

2. Compilation of BLAST with OpenMP must be done using thread safety otherwise the code would crash for more than one thread. This can be enabled with the use of "--with-mt" in the configure script.

Comparison of Intel, Open64 and GNU Builds

Intel compiler:

module load intel
export CFLAGS="-Wall -O2 -msse2 "
export CXXFLAGS="-Wall -O2 -msse2 "
export CPPFLAGS="-Wall -O2 -msse2 "
./configure --with-bin-release --without-debug --with-mt

GNU compiler:

module load gcc/.4.7.2 
export CFLAGS="-Wall -O2 -msse2 "
export CXXFLAGS="-Wall -O2 -msse2 "
export CPPFLAGS="-Wall -O2 -msse2 "
./configure --with-bin-release --without-debug --with-mt --with-64

Open64 compiler:

module load open64/.4.5.2
export CFLAGS="-Wall -O2 -msse2 "
export CXXFLAGS="-Wall -O2 -msse2 "
export CPPFLAGS="-Wall -O2 -msse2 "
./configure --with-bin-release --without-debug --with-mt --with-64

Following is a comparison of test case for blastx executable of BLAST.

**Wall Time on Intel Sandy-Bridge**
#processor	Intel-Basic Time(s)	Intel-Fancy Time(s)	GNU-Basic Time(s)	GNU-Fancy Time(s)	Open64-Basic Time(s)	Open64-Fancy Time(s)
1	400	412	416	451	475	-
2	209	216	219	235	251	-
4	115	120	122	130	137	-
8	67	69	73	77	79	-

The executable built with Open64 and fancy flags crashes on the Intel Sandy-Bridge server.

Clearly, intel compiler with basic flags has better performance with other compiler+flag combinations. Interestingly, the fancy flags suffer for both intel and gcc case.

On the AMD server, we got (these runs share resources (FPU, L2-Cache))-

**Wall Time on AMD Abu-Dhabi**
#processor	Intel Time(s)	Open64 Time(s)
1	557	615
2	348	380
4	199	216
8	126	136
16	83	88

¹ Basic Flags:
Intel:-Wall -O2 -msse2
Open64:-Wall -O2 -msse2
GNU: -Wall -O2 -msse2

² Fancy Flags:
Intel: -Wall -O3 -mavx -unroll-aggresive -opt-prefetch -use-intel-optimized-headers
GNU: CCFLAGS= -Wall -O3 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-pre -ftree-vectorize
Open64 -Wall -OPT:Ofast -mavx -mfma4 -march=bdver1 -O3 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns -ffast-math

Scaling

In the following table, we compare scaling of different executables of BLAST on Intel Sandy-Bridge server:

**Scaling on Intel Sandy-Bridge**
#processor	blastx	tblastx	blastp
1	412	768	248
2	216	574	172
4	120	268	131
8	69	98	113

Above table can be displayed as below, where runs on single processor are normalized to 1.00 and for others ratio to the single processor is calculated.

**Scaling on Intel Sandy-Bridge**
#processor	blastx	tblastx	blastp
1	1.00	1.00	1.00
2	1.91	1.34	1.44
4	3.43	2.87	1.89
8	5.97	7.84	2.19

Scaling on the AMD Abu Dhabi server is displayed below-

**Scaling on AMD Abu Dhabi**
#processor	blastx	tblastx	blastp
1	557	1243	-
2	348	943	-
4	199	437	-
8	126	199	-
16	83	-	-

Normalized table corresponding to above table is -

**Scaling on AMD Abu Dhabi**
#processor	blastx	tblastx	blastp
1	1.00	-	-
2	1.60	267	-
4	2.80		-
8	4.42	-	-
16	6.71	-	-

With boost and python Libraries

I read online that boost libraries might increase the efficiency. So, compiled the code using boost to see if there is any performance improvement.

module load boost
./configure --with-bin-release --without-debug --with-mt --with-boost=/apps/boost/1.53.0

Server	with boost	without boost
Intel	70	67
AMD	125	126

I tried python libraries as well

module load python
./configure --with-bin-release --without-debug --with-mt --with-python=/apps/python/2.7.3

The table below depicts the performance:

Server	with python	without python
Intel	70	67
AMD	126	126

None of these libraries seem to improve the performance of BLAST.

Profiling

For the blastx executable, we found-

 %   cumulative   self              self     total
time   seconds   seconds    calls   s/call   s/call  name
48.33    206.29   206.29  6838800     0.00     0.00  s_BlastAaWordFinder_TwoHit
17.73    281.95    75.66 12644388     0.00     0.00  s_BlastSmallAaScanSubject
11.13    329.45    47.50 801659273    0.00     0.00  BSearchContextInfo
 7.16    360.00    30.55 800757705    0.00     0.00  s_BlastAaExtendLeft
 4.90    380.92    20.92 800757705    0.00     0.00  s_BlastAaExtendTwoHit
 2.47    391.47    10.55 2311127628   0.00     0.00  ComputeTableIndexIncremental
 1.77    399.01     7.54    48008     0.00     0.00  BlastKarlinLHtoK
 1.43    405.12     6.12 211437430    0.00     0.00  s_BlastAaExtendRight
 1.19    410.21     5.09  1835792     0.00     0.00  Blast_SemiGappedAlign

In the "s_BlastAaWordFinder_TwoHit" subroutine, we have

index % time    self  children    called     name
              206.29  191.90 6838800/6838800     BlastAaWordFinder [9]
[10]    93.3  206.29  191.90 6838800             s_BlastAaWordFinder_TwoHit [10]
              75.66   11.13 12644388/12644388   s_BlastSmallAaScanSubject [15]
              20.92   36.67 800757705/800757705 s_BlastAaExtendTwoHit [16]
              47.44    0.00 800757705/801659273 BSearchContextInfo [17]
               0.08    0.00 6838800/6838800     Blast_UngappedStatsUpdate [194]
               0.00    0.01  901568/901568      BlastSaveInitHsp [880]
               0.01    0.00 6838800/6838800     Blast_ExtendWordExit [1357]

It seems that the blastx excutable uses mostly inside routines, not any library routines such as FFT.

Shared vs Exclusive run on AMD servers (4 x 6378 @ 2.4 GHz)

We descirbe the effect of shared FPU and L2-cache of the AMD server. The results are summarized in the following table (# processes=8):

Run Scheme	blastx
Shared time(s)	127
Exclusive time (s)	112

In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.

Performance Comparison

Server	blastx	Notes
Intel	67	1
Scaled Intel	92	2
AMD (Shared)	127	1,3
AMD(Exclusive)	112	1,4
AMD Shared/AMD Exc.	1.13	-
AMD Exc./Intel (scaled)	1.22	-
AMD Shared/Intel (scaled)	1.38	-
AMD (16 proc)/ Intel(8 proc)	0.90

¹ Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz
² Scaling was done by the factor of 3.3/2.4=1.375
³ "Shared" represents cores that share resources such as L2-Cache and FPU
⁴ "Exclusive" represents cores that don't share resources such as L2-Cache and FPU

Compilation Table

This table instructs number of different compiler options that can be used to build the code.

Package	Intel	GNU	Open64
VASP	Y	-	N
LAMMPS	Y	Y	Y
GROMACS	Y	Y	Y
DL_POLY	Y	Y	Y
BLAST	Y	Y	N

@@ Line 1: / Line 1: @@
-= STREAM BENCHMARKING=
+= STREAM=
 == A few words about numactl==
@@ Line 53: / Line 53: @@
 Before measuring the maximum memory bandwidth of the server, we first determine the number of threads required to achieve the maximum bandwidth of a given NUMA node. Results are summarized in the following table:
-{| border= "3" align="center" style="float: center;"
+{| border=3 align="Center" style="text-align: center;"
 |-
 !Number <br> of threads!!Bandwidth <br>(GB/s)
@@ Line 70: / Line 70: @@
 Following table describes the effect of variation of memory allocation with respect to the processors where the threads are running on the memory bandwidth(number of threads is four):
-{| border= "3" align="center" style="float: center;"
+{| border=3 align="Center" style="text-align: center;"
 |-
 !MEM<br>CPU|||0||1
@@ Line 111: / Line 111: @@
 Following table describes memory bandwidth on a single node by varying number of threads:
-{| border= "3" align="center" style="float: center;"
+{| border=3 align="Center" style="text-align: center;"
 |-
 !Number <br> of threads!!Bandwidth <br>(GB/s)
@@ Line 128: / Line 128: @@
 Following table describes the effect of variation of memory allocation with respect to the processors where the threads are running on the memory bandwidth(number of threads is four):
-{| border= "3" align="center" style="float: center;"
+{| border=3 align="Center" style="text-align: center;"
 |-
 !MEM<br>CPU|||0||1||2||3
@@ Line 187: / Line 187: @@
 Memory bandwidth on a single node by varying number of threads:
-{| border= "3" align="center" style="float: center;"
+{| border=3 align="Center" style="text-align: center;"
 |-
 !Number <br> of threads!!Bandwidth <br>(GB/s)
@@ Line 209: / Line 209: @@
 Following table describes the variation of memory bandwidth when we change memory allocation with respect to the cores where threads are running (Number of threads=4)
-{| border= "3" align="center" style="float: center;"
+{| border=3 align="Center" style="text-align: center;"
 |-
 !MEM<br>CPU|||0||1||2||3||4||5||6||7
@@ Line 269: / Line 269: @@
 </source>
 we get following table (In terms of socket, i.e. node 0-1 is socket 1, node 2-3 is socket 2 and so on)
-{| border= "3" align="center" style="float: center;"
+{| border=3 align="Center" style="text-align: center;"
 |-
 !MEM<br>CPU|||1||2||3||4
@@ Line 282: / Line 282: @@
 |}
+= VASP =
-= VASP BENCHMARKING =
 This page describes benchmarking of Vienna Ab-initio Simulation Package (VASP), a plane wave density functional theory code, used in studying electronic structure of materials.
@@ Line 304: / Line 301: @@
 </source>
 As a first check, Streaming SIMD Extension (SSE) was changed and following is the result of a self consistent field (SCF) calculation for MgMOS (For input files, please ask Charles Taylor or Manoj Srivastava):
-{| border= 3
+{| border=3 align="Center" style="text-align: center;"
 !align="Center"|SIMD Instruction!!Time(s)
 |-
@@ Line 317: / Line 314: @@
 |align="Center"|ssse3||align="Center"|156
 |}
+There does not seem to be a significant impact of SSE sets on the run time of VASP.
 ===MKL FFTs (via FFTW wrappers)===
@@ Line 338: / Line 337: @@
 </source>
-Upon making above changes, about 60% improvement on run time of the code was found on the Intel machine (E5-2643 @ 3.30GHz). Following table depicts the run time variation with SIMD instruction sets:
+Following table depicts the run time variation with SIMD instruction sets:
-{| border= 3 align="center"
+{| border=3 align="Center" style="text-align: center;"
 !SIMD Instruction!!Time(s)
 |-
@@ Line 354: / Line 353: @@
 |ssse3||94
 |}
+In conclusion, upon making changes (using "fftmpiw.o" as opposed to "fftmpi.o"), a significant 60% improvement on the run time of the code was found on the Intel machine (E5-2643 @ 3.30GHz).
 ===FFTW FFTs ===
@@ Line 374: / Line 375: @@
 From our previous experience, we concluded that the performance of VASP did not depend substantially on the SIMD instruction sets, so for FFTW library, we only tried one set. Following is the result:
-{| border= "3" align="center" style="float: center;"
+{| border=3 align="Center" style="text-align: center;"
 |-
 !SIMD Instruction!!Time(s)
@@ Line 380: / Line 381: @@
 |sse2||118
 |}
+We conclude that FFTs from MKL library are better than the ones from FFTW.
 == AMD (2 x 6220 @ 3.0 GHz) ==
@@ Line 399: / Line 402: @@
 </source>
-The results are summarized in the following table:
+From the computer architecture point of view, the bulldozer core aka module of AMD server lies in between a true dual core processor and a single core processor with simultaneous multithreading capability. The cores on AMD servers share some of the resources such as L2 cache and floating point unit (FPU), so the performance of a code would get affected if the threads are run on the shared cores or exclusive cores.
+For detail information about bulldozer core, please have a look at
+http://en.wikipedia.org/wiki/Bulldozer_%28microarchitecture%29
+The results are summarized in the following table (8 processor runs):
-{| border=3 style="text-align: center;"
+{| border=3 align="Center" style="text-align: center;"
 !Run Scheme!! Native!! MKL!!FFTW!!FFTW!!FFTW!!FFTW!!FFTW!!FFTW
 |-
-|Shared L2-Cache time(s)||399||261||333||319||334||336||315||319
+|Shared <br>time(s)||399||261||333||319||334||336||315||319
 |-
-|Exclusive L2-Cache time (s)||274||159||217||219||215||217||213||211
+|Exclusive <br> time (s)||274||159||217||219||215||217||213||211
 |-
 |Notes||-||-||1||2||3||4||5||6
 |}
+In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.
+You can clearly see the effect of FPU sharing on the server for all the FFT libraries. Also, similar to the Intel servers, FFT from the MKL libraries work better as opposed to any other libraries.
 <sup>1</sup> Default compiler Flags were used to build FFT.<br>
@@ Line 425: / Line 434: @@
 Following is a summary of results for the test case of MgMOS ran on the Intel and AMD servers with 8 processors.
-{| border= 3 style="text-align: center;"
+{| border=3 align="Center" style="text-align: center;"
 !Server!!Native!!MKL!!FFTW
 |-
@@ Line 432: / Line 441: @@
 |Intel (Scaled)||174||106||130
 |-
-|AMD (Shared L2 Cache)||399||261||319
+|AMD (Shared)||399||261||319
 |-
-|AMD (Exc. L2 Cache)||274||159||211
+|AMD (Exclusive)||274||159||211
 |-
 |AMD Shared/AMD Exc.||1.46||1.64||1.51
@@ Line 442: / Line 451: @@
 |Notes||-||-||1
 |}
+In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.
+In summary--
+. VASP runs better (~1.5x) on the Intel server than the AMD server, even with the interleaved cores.
+. FPU sharing reduces the efficiency on the AMD server to 1.5x.
+. FFTs from MKL are better builds.
 <sup>1</sup> Compiled by UFHPC (Charles Taylor or Craig Prescott)<br>
+= LAMMPS =
-= LAMMPS BENCHMARKING =
+==Scaling with Number of Processors==
-== Intel (2 x E5-2643 @ 3.30GHz) ==
+LAMMPS is compiled with the following flags:
-LAMMPS is compiled with following flags:
 <source lang=make>
 module load intel openmpi
 CC = mpiCC
-CCFLAGS = -O2 -xSSE2
+CCFLAGS = -O2 -xsse2
 FFT_INC =  -I$(HPC_MKL_DIR)/include/fftw
 FFT_PATH =
@@ Line 460: / Line 479: @@
 The benchmarking runs are done by the input file provided with the package. (LJ = atomic fluid, Lennard-Jones potential with 2.5 sigma cutoff (55 neighbors per atom), NVE integration).
-Following table describes the variation of run time with number of processors:
+Following table describes the variation of run time with number of processors on the Intel server:
-{| border=3 style="text-align: center;"
+{| border=3 align="Center" style="text-align: center;"
 ! # processors!! Time(s)
 |-
@@ Line 473: / Line 492: @@
 We find linear scaling with number of processors on the intel machine.
-Following table shows variation of Streaming SIMD Extension (SSE)(# threads=8):
+We also ran the "lj" benchmark on the AMD server (for comparison, we provide results on the Intel server as well):
-{| border= 3
-!align="Center"|SIMD Instruction!!Time(s)
+{| border=3 align="Center" style="text-align: center;"
+! # processors!!lj<br>Time(s)!!chain<br>Time(s)!!eam<br>Time(s)!!rhodo<br>Time(s)!!Notes
+|-
+|16||180||84||476||2877||-
+|-
+|8||329||149||908||5506||-
+|-
+|4||547||248||1509||9398||-
+|-
+|1||1651||724||4708||-||-
+|-
+|Intel (8 proc)||158||67||396||2361||1
+|-
+|Scaled <br>Intel (8 proc)||217||92||545||3246||2
+|-
+|Scaled Intel(8 proc)/ <br>AMD (16 proc)||1.20||1.15||1.14||1.13||3
+|}
+For all the test cases, runs on the Intel servers( 8 threads) are slower than AMD servers (16 threads) by about 15%.
+<sup>1</sup> Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz<br>
+<sup>2</sup> Scaling was done by the factor of 3.3/2.4=1.375 <br>
+<sup>3</sup> Comparison of 8 processors run on Intel vs 16 processors run on AMD <br>
+== Comparison of Intel, Open64 and GNU Builds ==
+LAMMPS with Intel compiler:
+<source lang=make>
+module load intel openmpi
+CC = mpiCC
+CCFLAGS = -O2 -msse2
+FFT_INC = -I$(HPC_MKL_DIR)/include/fftw
+FFT_PATH =
+FFT_LIB = -L$(HPC_MKL_DIR)/lib/intel64 -lfftw3xc -lmkl_intel_lp64 -lmkl_sequential -lmkl_core
+</source>
+LAMMPS with open64 compiler:
+<source lang=make>
+module load open64/.4.5.2 openmpi
+CC = mpiCC
+CCFLAGS = -O2 -msse2
+MPI_DIR = /usr/mpi/open64/openmpi-1.6
+MPI_INC = -I$(MPI_DIR)/include
+MPI_LIB = -L$(MPI_DIR)/lib64 -lmpi
+MPI_PATH =
+FFT_DIR = /home/manoj/FFTW/charlie/3.3.2
+FFT_INC = -I$(FFT_DIR)/include/fftw3
+FFT_PATH =
+FFT_LIB = -L$(FFT_DIR)/lib -lfftw3
+</source>
+LAMMPS with gnu compiler:
+<source lang=make>
+module load gcc/.4.7.2 openmpi
+CC = g++
+CCFLAGS = -O2 -msse2
+MPI_DIR = /usr/mpi/gnu/openmpi-1.6
+MPI_INC = -I$(MPI_DIR)/include
+MPI_LIB = -L$(MPI_DIR)/lib64 -lmpi -lmpi_cxx
+MPI_PATH =
+FFT_DIR = /home/manoj/FFTW/gnu/3.3.2
+FFT_INC = -I$(FFT_DIR)/include/fftw3
+FFT_PATH =
+FFT_LIB = -L$(FFT_DIR)/lib -lfftw3
+</source>
+For testing, we only ran "lj" benchmark and found:
+{| border=3 align="Center" style="text-align: center;"
+|-
+!Compiler!!Intel<br>Time(s)!!Intel<br>Time(s)!!AMD<br>Time(s)!!AMD<br>Time(s)
+|-
+|Intel||158||151||329||321
+|-
+|Open64||173||-||352||337
+|-
+|GNU||152||145||341||320
+|-
+|NOTES||1||2||1,3||2,3
+|}
+<sup>1</sup> '''Basic Flags:'''<br>'''Intel:''' -O2 -msse2 <br>
+'''Open64:''' -O2 -msse2 <br>
+'''GNU:''' -O2 -msse2 <br>
+<sup>2</sup> '''Fancy Flags:'''<br>
+'''Intel:''' -O2 -mavx -unroll-aggresive -ipo -opt-prefetch -use-intel-optimized-headers <br>
+'''Open64:''' CCFLAGS =-OPT:Ofast -mavx -mfma4 -march=bdver1 -O2 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns -ffast-math <br>
+'''GNU:''' CCFLAGS= -O2 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-pre -ftree-vectorize
+<sup>3</sup> Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit)
+== Intel (2 x E5-2643 @ 3.30GHz) ==
+=== Intel Compiler and SIMD Sets===
+We used Intel compiler as follows:
+<source lang=make>
+module load intel openmpi
+CC = mpiCC
+CCFLAGS = -O2 -xSSE2
+FFT_INC =  -I$(HPC_MKL_DIR)/include/fftw
+FFT_PATH =
+FFT_LIB = -L$(HPC_MKL_DIR)/lib/intel64 -lfftw3xc -lmkl_intel_lp64 -lmkl_sequential -lmkl_core
+</source>
+Following table shows variation of Streaming SIMD Extension (SSE) sets(# threads=8):
+{| border=3 align="Center" style="text-align: center;"
+|-
+|Extension<br>set|| Time(s)
 |-
 |align="Center"|sse2||align="Center"|158
+|-
+|align="Center"|sse3||align="Center"|157
+|-
+|align="Center"|ssse3||align="Center"|157
 |-
 |align="Center"|sse4.1||align="Center"|158
@@ Line 484: / Line 616: @@
 |-
 |align="Center"|avx||align="Center"| 152
+|}
+"avx" instruction set is slightly better than the other sets!
+The binaries for the above SIMD sets use "-x" option for the build, which does not work for the instruction sets other than "-sse2" on the AMD server, so for the next step we build our binaries with "-m" option and run it on the intel and AMD servers to see whether we could successfully run the binaries on both servers. Following table demonstrates the result for the "lj" benchmark:
+{| border=3 align="Center" style="text-align: center;"
+!align="Center"|SIMD <br>Instruction!!Intel<br>Time(s)!!AMD<br>Time(s)
+|-
+|align="Center"|sse2||align="Center"|158||align="Center"|329
+|-
+|align="Center"|sse3||align="Center"|157||align="Center"|329
+|-
+|align="Center"|ssse3||align="Center"|157||align="Center"|329
+|-
+|align="Center"|sse4.1||align="Center"|158||align="Center"|330
+|-
+|align="Center"|sse4.2||align="Center"|157||align="Center"|329
+|-
+|align="Center"|avx|| align="Center"|152||align="Center"|319
+|-
+|align="Center"|Notes||align="Center"|-||align="Center"|1
+|}
+<sup>1</sup> Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit).<br>
+Clearly on both, Intel as well as AMD servers, "avx" instructions are better choice for the "lj" benchmark. We ran other benchmarks for the SIMD sets:
+{| border=3 align="Center" style="text-align: center;"
+|-
+!SIMD <br>Instruction!!colspan="2"|chain!!colspan="2"|eam!!colspan="2"|rhodo
+|-
+!-!!Intel!!AMD!!Intel!!AMD!!Intel!!AMD
+|-
+|sse2||67||149||396||908||2361||5506
+|-
+|sse3||67||149||398||908||2355||5486
+|-
+|ssse3||66||149||399||907||2359||5485
 |-
-|align="Center"|ssse3||align="Center"|157
+|sse4.1||68||148||395||908||2351||5420
+|-
+|sse4.2||66||148||396||909||2346||5479
+|-
+|avx||65||145||387||897||2290||5360
+|-
+|Notes||-||1||-||1||-||1
+|}
+For all the benchmarks, "avx" seems to be a better choice compared to other instruction sets.
+<sup>1</sup> Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit).
+== MKL vs FFTW FFTs ==
+We profiled the code to see where does it spend most of its time. Below is a summary of all the time spent in the FFTs for all the benchmarks that we tried.
+'''lj:'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.00    185.61     0.00        1     0.00     0.00  LAMMPS_NS::FFT3d::timing1d(double*, int, int)
+.00    185.61     0.00        1     0.00     0.00  fft_1d_only
+'''chain:'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.00     70.62     0.00        1     0.00     0.00  LAMMPS_NS::FFT3d::timing1d(double*, int, int)
+.00     70.62     0.00        1     0.00     0.00  fft_1d_only
+'''eam:'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.00    381.72     0.00        1     0.00     0.00  LAMMPS_NS::FFT3d::timing1d(double*, int, int)
+.00    381.72     0.00        1     0.00     0.00  fft_1d_only
+'''rhodo:'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.81    118.18     1.04 10423040     0.00     0.00  kf_work(FFT_DATA*, FFT_DATA const*, unsigned long, int, int*, kiss_fft_state*)
+.72    119.10     0.92 31269120     0.00     0.00  kf_bfly4(FFT_DATA*, unsigned long, kiss_fft_state*, unsigned long)
+We can clearly see that the code does not spend any significant time in the FFT routines for any benchmarks. So, if we change the FFT from MKL to FFTW, it should not change the performance at all. As a check, we built LAMMPS with FFTW FFTs using:
+<source lang=make>
+module load intel openmpi fftw
+CC = mpiCC
+CCFLAGS = -O2 -mavx
+FFT_DIR = /apps/fftw/3.3.2
+FFT_INC = -I$(FFT_DIR)/include/fftw3
+FFT_PATH =
+FFT_LIB = -L$(FFT_DIR)/lib -lfftw3
+</source>
+For the test, we ran "lj" benchmark on the Intel server and found:
+{| border=3 align="Center" style="text-align: center;"
+|-
+!FFT!!Time(s)
+|-
+|MKL||152
+|-
+|FFTW||152
+|}
+As expected, there is no difference between the FFTs from FFTW or MKL on the performance of LAMMPS.
+== AMD (4 x 6378 @ 2.4 GHz) ==
+In this section, we descirbe the effect of shared FPUs and cache of the AMD server on the performance of LAMMPS.
+The results are summarized in the following table (# threads=8):
+{| border=3 align="Center" style="text-align: center;"
+!Run Scheme!! lj!!chain!!eam!!rhodo
+|-
+|Shared<br> time(s)||319||145||897||5360
+|-
+|Exclusive<br>time (s)||277||126||778||4426
+|}
+In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.
+== Performance Comparison ==
+Following is a table for performance comparison of Intel and AMD servers when the job was run using 8 threads.
+{| border=3 align="Center" style="text-align: center;"
+!Server!!lj!!chain!!eam!!rhodo
+|-
+|Intel ||158||65||387||2290
+|-
+|Intel (Scaled)||217||89||532||3149
+|-
+|AMD (Shared)||319||145||897||5360
+|-
+|AMD (Exclusive)||277||126||778||4426
+|-
+|AMD Shared/AMD Exc.||1.15||1.15||1.15||1.21
+|-
+|AMD Exc./Intel (scaled)||1.28||1.42||1.46||1.41
+|}
+In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.
+In summary--
+. LAMMPS runs better (~1.3-1.5X) on the Intel server than the AMD server, even with the interleaved cores.
+. FPU sharing reduces the efficiency on the AMD server to 1.2X.
+=GROMACS=
+== Comparison of Intel, Open64 and GNU Builds ==
+Intel compiler:
+<source lang=make>
+module load intel openmpi
+export F77=mpif77
+export F90=mpif90
+export CC=mpicc
+export CFLAGS="-O2 -msse2"
+export FFLAGS="-O2 -msse2"
+./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float --with-fft=mkl LIBS="-L/opt/intel/composerxe
+/lib/intel64 -lfftw3xc -lmkl_intel_lp64 -lmkl_sequential -lmkl_core"
+make
+make install
+</source>
+Open64 compiler:
+<source lang=make>
+module load open64/.4.5.2 openmpi
+export F77=openf90
+export F90=openf90
+export CC=opencc
+export CFLAGS="-O2 -msse2"
+export FFLAGS="-O2 -msse2"
+export CPPFLAGS="-I/home/manoj/FFTW/fpic-charlie/3.3.2/include"
+export LDFLAGS="-L/home/manoj/FFTW/fpic-charlie/3.3.2/lib"
+./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float
+make
+make install
+</source>
+GNU compiler:
+<source lang=make>
+module load gcc/.4.7.2 openmpi
+export F77=gfortran
+export F90=f95
+export CC=gcc
+export CFLAGS="-O2 -msse2"
+export FFLAGS="-O2 -msse2"
+export CPPFLAGS="-I/home/manoj/FFTW/gnu/3.3.2/include"
+export LDFLAGS="-L/home/manoj/FFTW/gnu/3.3.2/lib"
+./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float
+make
+make install
+</source>
+There are some test cases in "gromacs-4.5.5/share/tutor" directory, however not all of them work. So far, I could only get "water",
+"methane", and "mixed" to work. Instructions to run MD simulations are on http://manual.gromacs.org/online/water.html page.
+You first need to create a " .tpr" file using
+<source lang=make>
+./grompp_d -v
+</source>
+After this, you can run "mdrun_d" for the molecular dynamics simulation.
+In the input file provided by GROMACS, there is a mistake in the "grompp.mdp" file. The line starting with "bd-temp" has to be commented out. Upon some internet search, I found that the file, "grompp.mdp" is the input file for an older version of GROMACS, and apparently some of the parameters have become obsolete.
+Following results are for the MD simulation on water using 8 processors on Intel (E5-2643) and AMD (Opetran-6378) servers:
+{| border=3 align="Center" style="text-align: center;"
+|-
+!Compiler!!Intel<br>Time(s)!!Intel<br>Time(s)!!AMD<br>Time(s)!!AMD<br>Time(s)
+|-
+|Intel||157||157||361||363
+|-
+|Open64||167||-||392||383
+|-
+|GNU||160||-||377||368
+|-
+|NOTES||1||2||1,3||2,3
+|}
+<sup>1</sup> '''Basic Flags:'''<br>'''Intel:''' -O2 -msse2 <br>
+'''Open64:''' -O2 -msse2 <br>
+'''GNU:''' -O2 -msse2 <br>
+<sup>2</sup> '''Fancy Flags:'''<br>
+'''Intel:''' -O2 -mavx -unroll-aggresive -opt-prefetch -use-intel-optimized-headers <br>
+'''Open64:''' CCFLAGS =-OPT:Ofast -mavx -mfma4 -march=bdver1 -O2 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns <br>
+'''GNU:''' CCFLAGS= -O2 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-pre -ftree-vectorize
+<sup>3</sup> Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit)
+==Scaling with Number of Processors==
+"Water" benchmark was run using gromacs compiled with the intel and openmpi (fancy flags) as shown on above section.
+Following table describes the variation of run time with number of processors on the Intel (E5-2643) server:
+{| border=3 align="Center" style="text-align: center;"
+! # processors!! Time(s)!! Factor
+|-
+|1||950||1.00
+|-
+|4||252||3.76
+|-
+|8||157||6.05
+|}
+We find linear scaling with number of processors on the intel server.
+We also ran the same benchmark on the AMD (Opetran-6378) server (for comparison, we provide results on the Intel server as well):
+{| border=3 align="Center" style="text-align: center;"
+! # processors!!water<br>Time(s)!!Notes
+|-
+|16||241||-
+|-
+|8||363||-
+|-
+|4||532||-
+|-
+|1||1288||-
+|-
+|Intel (8 proc)||157||1
+|-
+|Scaled <br>Intel (8 proc)||216||2
+|-
+|AMD (16 proc)/ <br>Scaled Intel(8 proc)||1.12||3
+|}
+<sup>1</sup> Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz<br>
+<sup>2</sup> Scaling was done by the factor of 3.3/2.4=1.375 <br>
+<sup>3</sup> Comparison of 8 processors run on Intel vs 16 processors run on AMD <br>
+==Instruction Set Dependence==
+GROMACS is compiled with the following flags:
+<source lang=make>
+module load intel openmpi mkl
+export F77=mpif77
+export F90=mpif90
+export CC=mpicc
+export CFLAGS="-O2 -msse2 -unroll-aggresive -opt-prefetch -use-intel-optimized-headers"
+export FFLAGS="-O2 -msse2 -unroll-aggresive -opt-prefetch -use-intel-optimized-headers"
+./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float --with-fft=mkl LIBS="-L/opt/intel
+/composerxe/lib/intel64 -lfftw3xc -lmkl_intel_lp64 -lmkl_sequential -lmkl_core"
+make
+make install
+</source>
+Table captures the dependence of instruction sets on Intel (E5-2643) and AMD (Opetran-6378) machine with 8 processes:
+{| | border=3 align="Center" style="text-align: center;"
+|-
+!SIMD <br>Instruction!!Intel!!AMD
+|-
+|sse2||158||364
+|-
+|sse3||158||362
+|-
+|ssse3||157||362
+|-
+|sse4.1||159||360
+|-
+|sse4.2||157||362
+|-
+|avx||157||363
+|-
+|Notes||-||1
+|}
+GROMACS seems to be instruction set independent.<br>
+<sup>1</sup> Runs on AMD servers are "naive":caches are shared and so are FPUs (Floating point unit)
+==MKL vs FFTW==
+There is a problem in profiling the code. We don't see as many subroutines as we wish to see. Intel compiler is still OK, but GNU compiler is worse: it only shows only one subroutine. We don't see any FFT routine in the test case that we are using.
+'''Intel Compiler'''
+ time    seconds   seconds    calls   s/call   s/call  name
+.42      0.13     0.13        6    21.67    28.33  do_md
+.79      0.16     0.03  2160054     0.00     0.00  copy_rvec
+.26      0.17     0.01   600018     0.00     0.00  clear_mat
+.26      0.18     0.01                             _intel_fast_memcpy
+.26      0.19     0.01                             _intel_fast_memcpy.P
+.00      0.19     0.00   720018     0.00     0.00  copy_mat
+.00      0.19     0.00        6     0.00    28.33  mdrunner
+.00      0.19     0.00        3     0.00     0.00  copy_rvec
+.00      0.19     0.00        1     0.00     0.00  copy_mat
+.00      0.19     0.00        1     0.00     0.00  get_nthreads
+.00      0.19     0.00        1     0.00     0.00  mdrunner_start_threads
+'''GNU Compiler'''
+ time     seconds   seconds    calls   s/call   s/call  name
+.01     0.02     0.02        1    20.00    20.00  do_md
+To see the FFT dependence, we built GROMACS with FFTW FFTs using:
+<source lang=make>
+module load intel openmpi fftw
+export F77=mpif77
+export F90=mpif90
+export CC=mpicc
+export CFLAGS="-O2 -mavx -unroll-aggresive -opt-prefetch -use-intel-optimized-headers"
+export FFLAGS="-O2 -mavx -unroll-aggresive -opt-prefetch -use-intel-optimized-headers"
+#export CFLAGS="-O2 -msse2"
+#export FFLAGS="-O2 -msse2"
+export CPPFLAGS="-I/apps/fftw/3.3.2/include"
+export LDFLAGS="-L/apps/fftw/3.3.2/lib -lfftw3"
+./configure --prefix=/home/manoj/profile/gromacs/gromacs-4.5.5 --enable-shared=yes --enable-mpi --without-x --disable-float
+make
+make install
+</source>
+We ran "water" benchmark on the Intel(E5-2643) and AMD (Opetran-6378) servers using 8 processors and found:
+{| border=3 align="Center" style="text-align: center;"
+|-
+!FFT!!Intel<br>Time(s)!!AMD<br>Time(s)
+|-
+|MKL||157||363
+|-
+|FFTW||157||360
+|}
+There seems to be no difference between the FFTs from FFTW or MKL on the performance of GROMACS.
+== Shared vs Exclusive run on AMD servers (4 x 6378 @ 2.4 GHz) ==
+We descirbe the effect of shared FPU and L2-cache of the AMD server.
+The results are summarized in the following table (# processes=8):
+{| border=3 align="Center" style="text-align: center;"
+!Run Scheme!! Time(s)
+|-
+|Shared<br> time(s)||363
+|-
+|Exclusive<br>time (s)||266
+|}
+In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.
+== Performance Comparison ==
+Following is a table for performance comparison of Intel and AMD servers when the job was run using 8 processors:
+{| border=3 align="Center" style="text-align: center;"
+!Server!!Time(s)!!Notes
+|-
+|Intel ||157||1
+|-
+|Intel (Scaled)||216||2
+|-
+|AMD (Shared)||363||3
+|-
+|AMD (Exclusive)||266||4
+|-
+|AMD Shared/AMD Exc.||1.36||-
+|-
+|AMD Exc./Intel (scaled)||1.23||-
+|}
+<sup>1</sup> Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz<br>
+<sup>2</sup> Scaling was done by the factor of 3.3/2.4=1.375 <br>
+<sup>3</sup> "Shared" represents cores that share resources such as L2-Cache and FPU <br>
+<sup>4</sup> "Exclusive" represents cores that don't share resources such as L2-Cache and FPU
+=DL_POLY=
+== Comparison of Intel, Open64 and GNU Builds ==
+'''Intel compiler:'''
+<source lang=make>
+module load intel openmpi
+$(MAKE) LD="mpif90 -v -o " \
+                LDFLAGS="-shared-intel" \
+                FC="mpif90 -c" \
+                FCFLAGS="-O3 -mavx -opt-prefetch -use-intel-optimized-headers" \
+                EX=$(EX) BINROOT=$(BINROOT) $(TYPE)
+</source>
+'''GNU compiler:'''
+<source lang=make>
+module load gcc/.4.7.2 openmpi
+$(MAKE) LD="mpif90 -v -o " \
+                LDFLAGS=" " \
+                FC="mpif90 -c" \
+                FCFLAGS="-O3 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-
+                pre -ftree-vectorize" \
+                EX=$(EX) BINROOT=$(BINROOT) $(TYPE)
+</source>
+'''Open64 compiler:'''
+Open64 shows a problem in the subroutine config_module.f90 at line 62. This subroutine resizes the length of an array. The line
+<source lang=make>
+Character( Len = * ), Allocatable, Intent( InOut ) :: a(:)
+</source>
+makes "a" an allocatable array of strings, but the length of string is not defined. Intel and GNU compiler can handle this, however the open64 compiler can not. We made one assignment modification at this line (Interested readers should look up the code) and made the open64 compiler work.
+<source lang=make>
+ module load open64/.4.5.2 openmpi
+ $(MAKE) LD="mpif90 -v -o " \
+                LDFLAGS=" " \
+                FC="mpif90 -c" \
+                FCFLAGS="-OPT:Ofast -mavx -mfma4 -march=bdver1 -O2 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns -ffast-math " \
+                EX=$(EX) BINROOT=$(BINROOT) $(TYPE)
+</source>
+We downloaded 42 benchmarks from the DL_POLY website. The number of benchmarks are higher so we looked in to the result of profiling and found that there are in fact only 15 cases that use different codes inside the DL_POLY package and we are going to present our results based on those.
+Following results are for the various benchmarks using '''8 processors on Intel (E5-2643)''' servers:
+{|
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+|+'''Wall Time'''
+|-
+!Compiler!!Intel-Basic<br>Time(s)!!Intel-Fancy<br>Time(s)!!GNU-Basic<br>Time(s)!!GNU-Fancy<br>Time(s)!!Open64-Basic<br>Time(s)
+|-
+|Test1||66||62||71||83||75
+|-
+|Test3||69||65||76||75||79
+|-
+|Test4||74||87||77||78||87
+|-
+|Test5||70||65||81||75||87
+|-
+|Test7||95||88||105||99||106
+|-
+|Test9||67||57||85||69||117
+|-
+|Test11||72||61||85||83||91
+|-
+|Test13||63||58||65||62||72
+|-
+|Test14||106||114||113||136||91
+|-
+|Test17||67||65||74||72||77
+|-
+|Test18||102||89||104||99||115
+|-
+|Test27||136||131||154||-||158
+|-
+|Test31||114||96||121||121||134
+|-
+|Test35||80||81||90||90||93
+|}
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+|+'''CPU Time'''
+|-
+!Compiler!!Intel-Basic<br>Time(s)!!Intel-Fancy<br>Time(s)!!GNU-Basic<br>Time(s)!!GNU-Fancy<br>Time(s)!!Open64-Basic<br>Time(s)
+|-
+|Test1||65||60||-||-||74
+|-
+|Test3||68||64||-||-||79
+|-
+|Test4||70||64||-||-||79
+|-
+|Test5||61||59||-||-||86
+|-
+|Test7||88||84||-||-||104
+|-
+|Test9||59||57||-||-||116
+|-
+|Test11||72||60||-||-||90
+|-
+|Test13||57||56||-||-||67
+|-style="color: red;"
+|'''Test14'''||'''39'''||'''42'''||-||-||'''43'''
+|-
+|Test17||64||63||-||-||75
+|-
+|Test18||94||88||-||-||112
+|-
+|Test27||136||116||-||-||157
+|-
+|Test31||113||94||-||-||134
+|-
+|Test35||80||80||-||-||92
+|}
+|}
+From above table, we conclude that intel build with fancy flags is better choice for the code.
+We tried to compare intel and open64 builds on the AMD server and following table depicts that comparison:
+{|
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+!Compiler!!Intel-Fancy<br>Time(s)!!Open64-Basic<br>Time(s)!!Open64-Fancy<br>Time(s)
+|-
+|Test1||95||91||90
+|-
+|+'''Wall Time'''
+|-
+|Test3||221||235||219
+|-
+|Test4||213||225||211
+|-
+|Test5||142||173||161
+|-
+|Test7||300||310||295
+|-
+|Test9||144||219||209
+|-
+|Test11||158||202||183
+|-
+|Test13||247||262||245
+|-
+|Test14||186||165||149
+|-
+|Test17||190||201||189
+|-
+|Test18||356||353||385
+|-
+|Test27||323||377||334
+|-
+|Test31||269||313||290
+|-
+|Test35||228||251||240
+|}
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+|+'''CPU Time'''
+|-
+!Compiler!!Intel-Fancy<br>Time(s)!!Open64-Basic<br>Time(s)!!Open64-Fancy<br>Time(s)
+|-
+|Test1||91||90||90
+|-
+|Test3||219||233||218
+|-
+|Test4||204||218||203
+|-
+|Test5||141||171||160
+|-
+|Test7||298||309||293
+|-
+|Test9||137||219||207
+|-
+|Test11||157||202||183
+|-
+|Test13||245||259||242
+|-style="color: red;"
+|'''Test14'''||'''149'''||'''147'''||'''143'''
+|-
+|Test17||189||201||189
+|-
+|Test18||348||350||*383
+|-
+|Test27||323||370||332
+|-
+|Test31||268||312||290
+|-
+|Test35||227||251||239
+|}
+|}
+<sup>1</sup> '''Basic Flags:'''<br>'''Intel:''' -O2 -msse2 <br>
+'''Open64:''' -O2 -msse2 <br>
+'''GNU:''' -O2 -msse2 <br>
+<sup>2</sup> '''Fancy Flags:'''<br>
+'''Intel:''' -O2 -mavx -opt-prefetch -use-intel-optimized-headers <br>
+'''GNU:''' CCFLAGS= -O2 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-pre -ftree-vectorize <br>
+'''Open64''' -OPT:Ofast -mavx -mfma4 -march=bdver1 -O2 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns -ffast-math
+== More studies on Test 14 ==
+'''intel compiler:'''
+Intel server:  CPU time = 39s, Wall Time= 49s
+  %   cumulative   self              self     total
+ time   seconds   seconds    calls   s/call   s/call  name
+.56      4.85     4.85      182     0.03     0.03  constraints_shake_vv_
+.09      8.10     3.25       14     0.23     0.27  link_cell_pairs_
+.94     10.94     2.84       78     0.04     0.04  deport_atomic_data_
+.65     12.96     2.02                             __intel_ssse3_rep_memcpy
+.56     14.95     1.99       14     0.14     0.14  ewald_spme_forces_IP_spme_forces_
+.29     16.84     1.89       14     0.14     0.63  ewald_spme_forces_
+AMD server: CPU Time=151s Wall Time =190s
+  %   cumulative   self              self     total
+ time   seconds   seconds    calls   s/call   s/call  name
+.85     23.87    23.87       91     0.26     0.27  constraints_shake_vv_
+.33     38.70    14.83       78     0.19     0.19  deport_atomic_data_
+.82     46.90     8.20       13     0.63     0.64  constraints_rattle_
+.06     54.19     7.29       14     0.52     0.60  link_cell_pairs_
+.61     60.94     6.75     3836     0.00     0.00  gpfa_module_mp_gpfa3f_
+.32     67.34     6.40       14     0.46     0.46  bspgen_
+.15     73.53     6.19       52     0.12     0.77  npt_b0_vv_
+''' Open64 Compiler '''
+Intel server: CPU Time= 45s, Wall Time=290s
+  %   cumulative   self              self     total
+ time   seconds   seconds    calls   s/call   s/call  name
+.64      5.64     5.64      182     0.03     0.03  constraints_shake_vv__
+.06      9.99     4.35       14     0.31     0.69  ewald_spme_forces__
+.37     14.09     4.10       14     0.29     0.34  link_cell_pairs__
+.45     17.50     3.41       78     0.04     0.04  deport_atomic_data__
+.52     19.49     1.99  3378329     0.00     0.00  images_
+.16     21.35     1.86     3808     0.00     0.00  GPFA2F.in.GPFA_MODULE
+.16     23.21     1.86       26     0.07     0.07  constraints_rattle__
+AMD server: CPU Time= 156s, Wall Time=164s
+  %   cumulative   self              self     total
+ time   seconds   seconds    calls   s/call   s/call  name
+.38     22.58    22.58       91     0.25     0.25  constraints_shake_vv__
+.07     38.64    16.06       78     0.21     0.21  deport_atomic_data__
+.29     48.82    10.18       14     0.73     2.73  ewald_spme_forces__
+.54     58.09     9.27       14     0.66     0.76  link_cell_pairs__
+.99     65.45     7.36       13     0.57     0.58  constraints_rattle__
+.86     72.65     7.20     3836     0.00     0.00  GPFA3F.in.GPFA_MODULE
+.34     79.21     6.56       14     0.47     0.47  bspgen_
+==Scaling with Number of Processors==
+From the data of the above section, we conclude that intel build with fancy flags is better choice for the code and so we do our further runs only using the intel build.
+Following table describes the variation of run time with number of processors on the '''Intel (E5-2643)''' server:
+{| border=3 align="Center" style="text-align: center;"
+!#proc!!Test1!!Test3!!Test4!!Test5!!Test7!!Test9!!Test11!!Test13!!Test14!!Test17!!Test18!!Test27!!Test31!!Test35
+|-
+|1<br>(Factor)||91<br>(1.00)||389<br>(1.00)||541<br>(1.00)||511<br>(1.00)||502<br>(1.00)||755<br>(1.00)||397<br>(1.00)||292<br>(1.00)||255<br>(1.00)||302<br>(1.00)||445<br>(1.00)||651<br>(1.00)||612<br>(1.00)||-
+|-
+|4<br>(Factor)||90<br>(1.01)||122<br>(3.18)||160<br>(3.38)||119<br>(4.29)||173<br>(2.90)||119<br>(6.34)||119<br>(3.34)||116<br>(2.52)||147<br>(1.73)||105<br>(2.87)||147<br>(3.03)||229<br>(2.84)||184<br>(3.33)||136<br>(-)
+|-
+|8<br>(Factor)||62<br>(1.47)||65<br>(5.98)||87<br>(6.22)||65<br>(7.86)||88<br>(5.70)||57<br>(13.2)||61<br>(6.51)||58<br>(5.03)||114<br>(2.23)||65<br>(4.65)||89<br>(5.00)||131<br>(4.96)||96<br>(6.38)||81<br>(-)
+|}
+Following table depicts the result in the scaled manner. It's basically the same table as above.
+{| border=3 align="Center" style="text-align: center;"
+!#proc!!Test1!!Test3!!Test4!!Test5!!Test7!!Test9!!Test11!!Test13!!Test14!!Test17!!Test18!!Test27!!Test31!!Test35
+|-
+|1||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||-
+|-
+|4||1.01||3.18||3.38||4.29||2.90||6.34||3.34||2.52||1.73||2.87||3.03||2.84||3.33||-
+|-
+|8||1.47||5.98||6.22||7.86||5.70||13.2||6.51||5.03||2.23||4.65||5.00||4.96||6.38||-
+|}
+We also ran the same benchmark on the '''AMD (Opetran-6378)''' server (for comparison, we provide results on the Intel server as well):
+{| border=3 align="Center" style="text-align: center;"
+!#proc!!Test1!!Test3 !!Test4!!Test5!!Test7!!Test9!!Test11!!Test13!!Test14!!Test17!!Test18!!Test27!!Test31!!Test35!!Notes
+|-
+|1||91||395||619||788||1406||1292||825||393||441||882||898||651||651||-||-
+|-
+|4||102||362||375||277||521||285||307||376||267||318||497||554||477||381||-
+|-
+|8||95||221||213||142||300||144||158||247||186||190||356||323||269||228||-
+|-
+|16||90||127||112||78||167||74||90||170||116||145||193||192||152||170||-
+|-
+|Intel(8-proc)||62||65||87||65||88||57||61||58||114||65||89||131||96||81||1
+|-
+|Scaled Intel||85||89||120||89||121||78||84||80||157||89||122||180||132||111||2
+|-
+|AMD (16 proc)/<br>Intel(8 proc)||1.06||1.43||0.93||0.88||1.38||.95||1.07||2.14||0.74||1.63||1.58||1.07||1.15||1.53||3
+|}
+Table for the scaling with respect to 1 processor runs:
+{| border=3 align="Center" style="text-align: center;"
+!#proc!!Test1!!Test3!!Test4!!Test5!!Test7!!Test9!!Test11!!Test13!!Test14!!Test17!!Test18!!Test27!!Test31!!Test35
+|-
+|1||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||1.00||-
+|-
+|4||0.89||1.09||1.65||2.84||2.70||4.53||2.69||1.05||1.65||2.77||1.81||1.18||1.36||-
+|-
+|8||0.96||1.79||2.91||5.55||4.69||8.97||5.22||1.59||2.37||4.64||2.52||2.02||2.42||-
+|-
+|16||1.01||3.11||5.53||10.1||8.42||17.46||9.17||2.31||3.80||6.08||4.65||3.39||4.28||-
+|}
+There is wide variety of scaling. Some test cases scale linearly while others don't. The scaling is better on the Intel server as compared to the AMD server in most cases but in some cases they do show about the same scaling.
+<sup>1</sup> Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz<br>
+<sup>2</sup> Scaling was done by the factor of 3.3/2.4=1.375 <br>
+<sup>3</sup> Comparison of 8 processors run on Intel vs 16 processors run on AMD <br>
+== MKL vs FFTW FFTs ==
+We profiled the code to see where does it spend most of its time. Below is a summary of the profile for all the benchmarks that we tried.
+'''Test1:'''
+'''Intel'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.26      7.16     7.16   675309     0.00     0.00  vdw_forces_
+.57     13.64     6.48      201     0.03     0.03  link_cell_pairs_
+.72     18.13     4.49   675309     0.00     0.00  ewald_real_forces_
+.22     19.96     1.83      201     0.01     0.01  ewald_spme_forces_IP_spme_forces_
+.17     21.27     1.31      201     0.01     0.02  ewald_spme_forces_
+.95     22.27     1.00      201     0.00     0.12  two_body_forces_
+.83     23.24     0.97   675309     0.00     0.00  images_
+.08     24.02     0.78      201     0.00     0.00  bspgen_
+.42     24.38     0.36    11658     0.00     0.00  gpfa_module_mp_gpfa3f_
+.07     24.65     0.27      202     0.00     0.00  shellsort2_
+.67     24.82     0.17     1206     0.00     0.00  export_atomic_data_
+'''AMD'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.43     18.45    18.45  3379737     0.00     0.00  vdw_forces_
+.47     35.36    16.91     1000     0.02     0.02  link_cell_pairs_
+.23     46.57    11.21  3379737     0.00     0.00  ewald_real_forces_
+.77     55.84     9.27      500     0.02     0.02  bspgen_
+.78     60.39     4.55     1000     0.00     0.00  ewald_spme_forces_IP_spme_forces_
+.57     63.99     3.60     1000     0.00     0.02  ewald_spme_forces_
+.36     67.42     3.43                             deport_atomic_data_
+.34     70.05     2.63  3379737     0.00     0.00  images_
+.76     72.22     2.17      500     0.00     0.14  two_body_forces_
+.13     73.90     1.68                             spec_dexp2
+.24     74.88     0.98    29000     0.00     0.00  gpfa_module_mp_gpfa3f_
+.05     75.71     0.83      998     0.00     0.00  nvt_b0_vv_
+.86     76.39     0.68      501     0.00     0.00  shellsort2_
+'''Test3:'''
+'''Intel'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.53     26.21    26.21  1298431     0.00     0.00  vdw_forces_
+.82     48.37    22.16      201     0.11     0.13  link_cell_pairs_
+.22     69.62    21.25    26532     0.00     0.00  gpfa_module_mp_gpfa2f_
+.73     87.16    17.54  1298431     0.00     0.00  ewald_real_forces_
+.62     97.06     9.90     1200     0.01     0.01  deport_atomic_data_
+.04    103.10     6.04      201     0.03     0.21  ewald_spme_forces_
+.80    108.78     5.68      200     0.03     0.03  constraints_shake_vv_
+.37    113.82     5.04 43159044     0.00     0.00  local_index_
+.32    118.79     4.97  2355005     0.00     0.00  images_
+.06    123.36     4.57      200     0.02     0.03  constraints_rattle_
+.99    127.82     4.47 326609967     0.00     0.00  match_
+.57    131.66     3.84      201     0.02     0.02  ewald_spme_forces_IP_spme_forces_
+.01    134.67     3.01      201     0.01     0.60  two_body_forces_
+.10    136.32     1.65      201     0.01     0.01  parallel_fft_mp_forward_3d_fft_z_
+.04    137.87     1.55      201     0.01     0.06  parallel_fft_mp_forward_3d_fft_y_
+.98    139.33     1.46      201     0.01     0.01  bspgen_
+'''AMD'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.14     28.44    28.44  1299553     0.00     0.00  vdw_forces_
+.46     51.85    23.41      201     0.12     0.14  link_cell_pairs_
+.54     73.53    21.68    26532     0.00     0.00  gpfa_module_mp_gpfa2f_
+.90     92.13    18.60  1299553     0.00     0.00  ewald_real_forces_
+.30    105.85    13.72      200     0.07     0.07  constraints_rattle_
+.01    119.03    13.18      200     0.07     0.07  constraints_shake_vv_
+.23    130.73    11.70     1200     0.01     0.01  deport_atomic_data_
+.69    137.66     6.93      201     0.03     0.03  bspgen_
+.17    143.61     5.95      201     0.03     0.24  ewald_spme_forces_
+.65    148.59     4.98  2367053     0.00     0.00  images_
+.45    153.19     4.60 39319511     0.00     0.00  local_index_
+.25    157.41     4.23 328218229     0.00     0.00  match_
+.14    161.43     4.02      201     0.02     0.02  ewald_spme_forces_IP_spme_forces_
+.81    164.84     3.41                             spec_dexp2
+.59    167.82     2.98      201     0.01     0.66  two_body_forces_
+.30    170.26     2.44      201     0.01     0.01  parallel_fft_mp_forward_3d_fft_z_
+.80    171.76     1.50      201     0.01     0.01  parallel_fft_mp_back_3d_fft_x_
+'''Test4:'''
+'''Intel'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.66     29.94    29.94  1604385     0.00     0.00  vdw_forces_
+.84     55.35    25.41       31     0.82     0.98  link_cell_pairs_
+.21     76.55    21.20  1604385     0.00     0.00  ewald_real_forces_
+.69     96.92    20.37       30     0.68     0.71  constraints_shake_vv_
+.68    109.24    12.32       30     0.41     0.44  constraints_rattle_
+.32    120.99    11.75      180     0.07     0.07  deport_atomic_data_
+.79    127.07     6.08  2880181     0.00     0.00  images_
+.23    132.25     5.18 40320168     0.00     0.00  local_index_
+.10    137.22     4.98 364097691     0.00     0.00  match_
+.72    141.58     4.36       31     0.14     0.14  ewald_spme_forces_IP_spme_forces_
+.16    145.05     3.47       31     0.11     3.38  two_body_forces_
+.05    148.34     3.29     4092     0.00     0.00  gpfa_module_mp_gpfa2f_
+.95    151.47     3.13       31     0.10     0.42  ewald_spme_forces_
+.67    152.54     1.07       31     0.03     0.03  bspgen_
+'''AMD'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.03     33.20    33.20  1603402     0.00     0.00  vdw_forces_
+.13     57.37    24.17       31     0.78     0.90  link_cell_pairs_
+.76     80.87    23.50       30     0.78     0.81  constraints_shake_vv_
+.25    101.59    20.72  1603402     0.00     0.00  ewald_real_forces_
+.40    118.90    17.31       30     0.58     0.60  constraints_rattle_
+.53    132.76    13.86      180     0.08     0.08  deport_atomic_data_
+.27    138.78     6.02  2878846     0.00     0.00  images_
+.65    143.65     4.87       31     0.16     0.16  bspgen_
+.60    148.44     4.79 40437733     0.00     0.00  local_index_
+.45    152.96     4.52                             spec_dexp2
+.36    157.31     4.35       31     0.14     0.14  ewald_spme_forces_IP_spme_forces_
+.07    161.13     3.82       62     0.06     1.77  two_body_forces_
+.02    164.84     3.72 363897922     0.00     0.00  match_
+.87    168.28     3.44       31     0.11     0.55  ewald_spme_forces_
+.82    171.64     3.36     4092     0.00     0.00  gpfa_module_mp_gpfa2f_
+.75    173.03     1.39      150     0.01     0.30  nve_0_vv_
+'''Test5:'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.99     50.53    50.53      101     0.50     0.50  three_body_forces_
+.21     68.74    18.21   873523     0.00     0.00  ewald_real_forces_
+.19     85.80    17.06      101     0.17     0.17  link_cell_pairs_
+.25     97.31    11.51   873523     0.00     0.00  vdw_forces_
+.71    101.48     4.17   873523     0.00     0.00  images_
+.33    105.22     3.74      101     0.04     0.59  two_body_forces_
+.08    107.56     2.34      101     0.02     0.02  ewald_spme_forces_IP_spme_forces_
+.41    109.14     1.58      101     0.02     0.05  ewald_spme_forces_
+.97    110.23     1.09      101     0.01     0.01  bspgen_
+'''Test7:'''
+ time   seconds   seconds    calls   s/call   s/call  name
+.97     13.50    13.50      101     0.13     0.15  link_cell_pairs_
+.75     26.82    13.32     1326     0.01     0.01  constraints_shake_vv_
+.59     36.04     9.22      600     0.02     0.02  deport_atomic_data_
+.69     44.54     8.50  1249646     0.00     0.00  ewald_real_forces_
+.59     52.96     8.42  1249646     0.00     0.00  vdw_forces_
+.39     56.45     3.49  2122099     0.00     0.00  images_
+.34     59.91     3.46 23122212     0.00     0.00  local_index_
+.14     63.20     3.29      101     0.03     0.03  ewald_spme_forces_IP_spme_forces_
+.34     65.86     2.66      200     0.01     0.11  npt_b0_vv_
+.87     68.14     2.28      101     0.02     0.09  ewald_spme_forces_
+.78     70.35     2.21      100     0.02     0.03  constraints_rattle_
+.21     72.11     1.76      101     0.02     0.46  two_body_forces_
+.89     73.61     1.51 154519604     0.00     0.00  match_
+.85     75.08     1.47      101     0.01     0.01  bspgen_
+.65     75.60     0.52      202     0.00     0.00  shellsort2_
+'''Test9:'''
+.21     75.98    75.98      401     0.19     0.19  tersoff_forces_
+.09     76.85     0.87     2400     0.00     0.00  deport_atomic_data_
+.96     77.62     0.77      402     0.00     0.00  shellsort2_
+'''Test11:'''
+.75     52.13    52.13  4004908     0.00     0.00  metal_forces_
+.05     83.41    31.28     1001     0.03     0.03  link_cell_pairs_
+.82    114.36    30.95  4004908     0.00     0.00  metal_ld_collect_fst_
+.26    128.91    14.55  8009816     0.00     0.00  images_
+.59    132.59     3.68     1001     0.00     0.14  two_body_forces_
+.44    136.05     3.46     1001     0.00     0.04  metal_ld_compute_
+.35    137.97     1.92     1002     0.00     0.00  shellsort2_
+.62    138.85     0.88     6000     0.00     0.00  deport_atomic_data_
+'''Test13:'''
+.91     22.56    22.56    22348     0.00     0.00  gpfa_module_mp_gpfa2f_
+.43     37.39    14.83      900     0.02     0.02  deport_atomic_data_
+.80     51.47    14.08     1950     0.01     0.01  constraints_shake_vv_
+.38     61.47    10.00      151     0.07     0.08  link_cell_pairs_
+.49     68.02     6.55      300     0.02     0.09  npt_b0_vv_
+.02     74.01     5.99      302     0.02     0.02  gpfa_module_mp_gpfa3f_
+.86     79.81     5.80      151     0.04     0.33  ewald_spme_forces_
+.38     85.04     5.23      151     0.03     0.04  ewald_spme_forces_IP_spme_forces_
+.53     89.26     4.22 34695506     0.00     0.00  local_index_
+.47     93.40     4.14      150     0.03     0.03  constraints_rattle_
+.94     96.91     3.51  2364786     0.00     0.00  ewald_real_forces_
+.84    100.30     3.39  4097851     0.00     0.00  images_
+.36    103.11     2.81  2364786     0.00     0.00  vdw_forces_
+.32    104.68     1.57      151     0.01     0.01  bspgen_
+.27    106.19     1.51      151     0.01     0.01  parallel_fft_mp_forward_3d_fft_z_
+.18    107.60     1.41      151     0.01     0.01  parallel_fft_mp_back_3d_fft_x_
+.16    108.98     1.38      151     0.01     0.10  parallel_fft_mp_forward_3d_fft_y_
+.14    110.34     1.36      151     0.01     0.48  two_body_forces_
+.11    111.66     1.33 92125754     0.00     0.00  match_
+.09    112.96     1.30      151     0.01     0.01  parallel_fft_mp_forward_3d_fft_x_
+.99    114.14     1.18      151     0.01     0.10  parallel_fft_mp_back_3d_fft_y_
+'''Test14:'''
+.33     16.80    16.80      130     0.13     0.13  constraints_shake_vv_
+.48     25.05     8.25       60     0.14     0.14  deport_atomic_data_
+.24     30.75     5.70       11     0.52     0.60  link_cell_pairs_
+.41     35.80     5.05     3014     0.00     0.00  gpfa_module_mp_gpfa3f_
+.75     40.33     4.53       20     0.23     1.35  npt_b0_vv_
+.30     44.50     4.17       10     0.42     0.43  constraints_rattle_
+.27     48.65     4.15       11     0.38     2.20  ewald_spme_forces_
+.13     52.69     4.04     2992     0.00     0.00  gpfa_module_mp_gpfa2f_
+.28     56.06     3.37       11     0.31     0.31  ewald_spme_forces_IP_spme_forces_
+.19     58.57     2.51 20333039     0.00     0.00  local_index_
+.79     60.77     2.20  1534827     0.00     0.00  ewald_real_forces_
+.78     62.96     2.19  2646191     0.00     0.00  images_
+.30     64.77     1.81  1534827     0.00     0.00  vdw_forces_
+.29     66.57     1.80       11     0.16     0.16  bspgen_
+.92     68.08     1.51       22     0.07     0.07  gpfa_module_mp_gpfa5f_
+.80     69.50     1.42       11     0.13     0.60  parallel_fft_mp_forward_3d_fft_y_
+.79     70.91     1.41       11     0.13     0.60  parallel_fft_mp_back_3d_fft_y_
+.09     71.77     0.86 57924127     0.00     0.00  match_
+.95     72.52     0.75        1     0.75     0.75  dihedrals_14_check_
+'''Test17:'''
+.71     10.65    10.65      201     0.05     0.06  link_cell_pairs_
+.88     17.79     7.14   984116     0.00     0.00  ewald_real_forces_
+.43     23.67     5.88   984116     0.00     0.00  vdw_forces_
+.72     28.67     5.00     3200     0.00     0.00  constraints_shake_vv_
+.68     32.11     3.44  2260717     0.00     0.00  images_
+.84     35.11     3.01 23232840     0.00     0.00  local_index_
+.06     37.71     2.60      201     0.01     0.01  ewald_spme_forces_IP_spme_forces_
+.53     40.04     2.33      200     0.01     0.02  constraints_rattle_
+.46     41.82     1.78      201     0.01     0.03  ewald_spme_forces_
+.51     43.11     1.29     4235     0.00     0.00  pmf_coms_
+.25     44.27     1.16 118620664     0.00     0.00  match_
+.18     45.39     1.12     1200     0.00     0.00  deport_atomic_data_
+.10     46.47     1.08      201     0.01     0.17  two_body_forces_
+.10     47.55     1.08      201     0.01     0.01  bspgen_
+.50     48.32     0.77      400     0.00     0.03  npt_b0_vv_
+.11     48.89     0.57      402     0.00     0.00  shellsort2_
+.80     49.30     0.41      201     0.00     0.00  pass_shared_units_
+'''Test18:'''
+.45     69.38    69.38     1800     0.04     0.04  constraints_shake_vv_
+.78     89.07    19.69      101     0.19     0.22  link_cell_pairs_
+.63    106.45    17.38      100     0.17     0.20  constraints_rattle_
+.61    119.77    13.32  2041857     0.00     0.00  ewald_real_forces_
+.95    131.75    11.98  2041857     0.00     0.00  vdw_forces_
+.38    142.59    10.84     2718     0.00     0.01  pmf_coms_
+.29    153.24    10.65  4883071     0.00     0.00  images_
+.95    163.22     9.98 66656800     0.00     0.00  local_index_
+.18    169.62     6.40      200     0.03     0.60  npt_b0_vv_
+.74    175.14     5.52      101     0.05     0.06  ewald_spme_forces_IP_spme_forces_
+.84    178.84     3.70      101     0.04     0.16  ewald_spme_forces_
+.71    182.28     3.44      600     0.01     0.01  deport_atomic_data_
+.51    185.33     3.05      101     0.03     0.03  bspgen_
+.44    188.24     2.91      101     0.03     0.74  two_body_forces_
+.18    190.61     2.38 231279151     0.00     0.00  match_
+.76    192.14     1.53    25304     0.00     0.00  update_shared_units_
+'''Test27:'''
+.45     91.00    91.00 12076288     0.00     0.00  metal_forces_
+.32    148.56    57.56     3501     0.02     0.02  link_cell_pairs_
+.06    188.93    40.37 12076288     0.00     0.00  metal_ld_collect_eam_
+.90    210.00    21.07 24152576     0.00     0.00  images_
+.64    216.24     6.24     3501     0.00     0.06  two_body_forces_
+.39    221.90     5.66     3501     0.00     0.02  metal_ld_compute_
+.46    225.35     3.45     3502     0.00     0.00  shellsort2_
+.11    227.98     2.63    21000     0.00     0.00  deport_atomic_data_
+.90    230.11     2.13    21006     0.00     0.00  export_atomic_data_
+'''Test31:'''
+.17     66.30    66.30 12004000     0.00     0.00  metal_forces_
+.18    128.38    62.08     3001     0.02     0.02  link_cell_pairs_
+.22    156.50    28.12 12004000     0.00     0.00  metal_ld_collect_eam_
+.09    177.96    21.46 24008000     0.00     0.00  images_
+.35    189.35    11.39    18000     0.00     0.00  deport_atomic_data_
+.99    195.71     6.36     3001     0.00     0.06  two_body_forces_
+.77    201.60     5.89     3001     0.00     0.02  metal_ld_compute_
+.29    204.34     2.75     3002     0.00     0.00  shellsort2_
+.70    205.83     1.49     6000     0.00     0.00  npt_b0_vv_
+'''Test35:'''
+.22     27.64    27.64      562     0.05     0.06  link_cell_pairs_
+.94     47.89    20.25  1878757     0.00     0.00  ewald_real_forces_
+.75     57.79     9.90  1878757     0.00     0.00  vdw_forces_
+.52     63.40     5.61  3227549     0.00     0.00  images_
+.46     68.95     5.55     2008     0.00     0.00  constraints_shake_vv_
+.44     73.46     4.51      562     0.01     0.01  ewald_spme_forces_IP_spme_forces_
+.43     76.95     3.49 354007894     0.00     0.00  match_
+.38     80.38     3.43      562     0.01     0.15  two_body_forces_
+.30     83.73     3.35      562     0.01     0.01  bspgen_
+.23     87.01     3.29 28441741     0.00     0.00  local_index_
+.87     89.92     2.91      500     0.01     0.01  constraints_rattle_
+.85     92.81     2.89      562     0.01     0.02  ewald_spme_forces_
+.05     94.89     2.08     3366     0.00     0.00  deport_atomic_data_
+.71     96.63     1.74     1124     0.00     0.00  shellsort2_
+.44     98.09     1.46     1000     0.00     0.01  npt_m1_vv_
+.49     98.59     0.50      562     0.00     0.00  set_halo_particles_
+From the above data, we can clearly see that the FFT dependence of the code is very tiny (in some cases where it shows up, it's about a percent), so there is no need to try different FFT libraries for the purpose of efficiency.
+== Shared vs Exclusive run on AMD servers (4 x 6378 @ 2.4 GHz) ==
+We descirbe the effect of shared FPU and L2-cache of the AMD server.
+The results are summarized in the following table '''(# processes=8)''':
+{| border=3  align="Center" style="text-align: center;"
+!Run Scheme!!Test1!!Test3 !!Test4!!Test5!!Test7!!Test9!!Test11!!Test13!!Test14!!Test17!!Test18!!Test27!!Test31!!Test35
+|-
+|Shared<br> time(s)||95||221||213||142||300||144||158||247||186||190||356||323||269||228
+|-
+|Exclusive<br>time (s)||90||168||161||109||226||116||128||185||157||151||282||265||209||173
+|}
+In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.
+== Performance Comparison ==
+Following is a table for performance comparison of Intel and AMD servers when the job was run using '''8 processors''':
+{| border= 3 align="Center" style="text-align: center;"
+!Server!!Test1!!Test3 !!Test4!!Test5!!Test7!!Test9!!Test11!!Test13!!Test14!!Test17!!Test18!!Test27!!Test31!!Test35!!Notes
+|-
+|Intel||62||65||87||65||88||57||61||58||114||65||89||131||96||81||1
+|-
+|Scaled Intel||85||89||120||89||121||78||84||80||157||89||122||180||132||111||2
+|-
+|AMD (Shared)||95||221||213||142||300||144||158||247||186||190||356||323||269||228||1,3
+|-
+|AMD(Exclusive)||90||168||161||109||226||116||128||185||157||151||282||265||209||173||1,4
+|-
+|AMD Shared/AMD Exc.||1.05||1.31||1.32||1.30||1.33||1.24||1.23||1.34||1.18||1.26||1.26||1.22||1.29||1.32||-
+|-
+|AMD Exc./Intel (scaled)||1.06||1.89||1.34||1.22||1.87||1.49||1.52||2.31||1.00||1.70||2.31||1.47||1.58||1.56||-
+|-
+|AMD Shared/Intel (scaled)||1.12||2.48||1.78||1.60||2.48||1.85||1.88||3.09||1.18||2.13||2.92||1.79||2.03||2.05||-
+|-
+|AMD (16 proc)/<br>Intel(8 proc)||1.06||1.43||0.93||0.88||1.38||.95||1.07||2.14||0.74||1.63||1.58||1.07||1.15||1.53||3
+|}
+In summary--
+. In majority of cases, DL_POLY runs better (~1.2-2.3X) on the Intel server than the AMD server, even with the interleaved cores. However there are a few cases (test1 and test14) where there is negligible performance difference between both servers.
+. FPU sharing reduces the efficiency on the AMD server to 1.2-1.3X.
+<sup>1</sup> Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz<br>
+<sup>2</sup> Scaling was done by the factor of 3.3/2.4=1.375 <br>
+<sup>3</sup> "Shared" represents cores that share resources such as L2-Cache and FPU <br>
+<sup>4</sup> "Exclusive" represents cores that don't share resources such as L2-Cache and FPU
+=BLAST=
+A couple of things before we dive into the benchmarking-
+. NCBI-BLAST is not an MPI enabled code. Only parallelization that is available is intranode which can be achieved through OpenMP. If you would like parallel BLAST, MPIBLAST is an option but upon doing some internet search I found people reporting it to be unstable.
+. Compilation of BLAST with OpenMP must be done using thread safety otherwise the code would crash for more than one thread. This can be enabled with the use of "--with-mt" in the configure script.
+== Comparison of Intel, Open64 and GNU Builds ==
+'''Intel compiler:'''
+<source lang=make>
+module load intel
+export CFLAGS="-Wall -O2 -msse2 "
+export CXXFLAGS="-Wall -O2 -msse2 "
+export CPPFLAGS="-Wall -O2 -msse2 "
+./configure --with-bin-release --without-debug --with-mt
+</source>
+'''GNU compiler:'''
+<source lang=make>
+module load gcc/.4.7.2
+export CFLAGS="-Wall -O2 -msse2 "
+export CXXFLAGS="-Wall -O2 -msse2 "
+export CPPFLAGS="-Wall -O2 -msse2 "
+./configure --with-bin-release --without-debug --with-mt --with-64
+</source>
+'''Open64 compiler:'''
+<source lang=make>
+module load open64/.4.5.2
+export CFLAGS="-Wall -O2 -msse2 "
+export CXXFLAGS="-Wall -O2 -msse2 "
+export CPPFLAGS="-Wall -O2 -msse2 "
+./configure --with-bin-release --without-debug --with-mt --with-64
+</source>
+Following is a comparison of test case for blastx executable of BLAST.
+{|
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+|+'''Wall Time on Intel Sandy-Bridge'''
+|-
+!#processor!!Intel-Basic<br>Time(s)!!Intel-Fancy<br>Time(s)!!GNU-Basic<br>Time(s)!!GNU-Fancy<br>Time(s)!!Open64-Basic<br>Time(s)!!Open64-Fancy<br>Time(s)
+|-
+|1||400||412||416||451||475||-
+|-
+|2||209||216||219||235||251||-
+|-
+|4||115||120||122||130||137||-
+|-
+|8||67||69||73||77||79||-
+|}
+The executable built with Open64 and fancy flags crashes on the Intel Sandy-Bridge server.
+Clearly, intel compiler with basic flags has better performance with other compiler+flag combinations. Interestingly, the fancy flags suffer for both intel and gcc case.
+On the AMD server, we got (these runs share resources (FPU, L2-Cache))-
+{|
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+|+'''Wall Time on AMD Abu-Dhabi'''
+|-
+!#processor!!Intel<br>Time(s)!!Open64<br>Time(s)
+|-
+|1||557||615
+|-
+|2||348||380
+|-
+|4||199||216
+|-
+|8||126||136
+|-
+|16||83||88
+|}
+<sup>1</sup> '''Basic Flags:'''<br>'''Intel:'''-Wall -O2 -msse2 <br>
+'''Open64:'''-Wall -O2 -msse2 <br>
+'''GNU:''' -Wall -O2 -msse2 <br>
+<sup>2</sup> '''Fancy Flags:'''<br>
+'''Intel:''' -Wall -O3 -mavx -unroll-aggresive -opt-prefetch -use-intel-optimized-headers <br>
+'''GNU:''' CCFLAGS= -Wall -O3 -mavx -fsched-pressure -flto -funroll-all-loops -fprefetch-loop-arrays -minline-all-stringops -fno-tree-pre -ftree-vectorize <br>
+'''Open64''' -Wall -OPT:Ofast -mavx -mfma4 -march=bdver1 -O3 -fomit-frame-pointer -LNO:simd=2 -WOPT:sib=on -LNO:prefetch=2:pf2=0 -CG:use_prefetchnta=on -LNO:prefetch_ahead=4-malign-double -fstrict-aliasing -fno-schedule-insns -ffast-math
+==Scaling==
+In the following table, we compare scaling of different executables of BLAST on Intel Sandy-Bridge server:
+{|
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+|+'''Scaling on Intel Sandy-Bridge'''
+|-
+!#processor!!blastx!!tblastx!!blastp
+|-
+|1||412||768||248
+|-
+|2||216||574||172
+|-
+|4||120||268||131
+|-
+|8||69||98||113
+|}
+Above table can be displayed as below, where runs on single processor are normalized to 1.00 and for others ratio to the single processor is calculated.
+{|
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+|+'''Scaling on Intel Sandy-Bridge'''
+|-
+!#processor!!blastx!!tblastx!!blastp
+|-
+|1||1.00||1.00||1.00
+|-
+|2||1.91||1.34||1.44
+|-
+|4||3.43||2.87||1.89
+|-
+|8||5.97||7.84||2.19
+|}
+Scaling on the AMD Abu Dhabi server is displayed below-
+{|
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+|+'''Scaling on AMD Abu Dhabi'''
+|-
+!#processor!!blastx!!tblastx!!blastp
+|-
+|1||557||1243||-
+|-
+|2||348||943||-
+|-
+|4||199||437 ||-
+|-
+|8||126||199||-
+|-
+|16||83||-||-
+|}
+Normalized table corresponding to above table is -
+{|
+| STYLE="top"|
+{|| border=3 align="Center" style="text-align: center;"
+|-
+|+'''Scaling on AMD Abu Dhabi'''
+|-
+!#processor!!blastx!!tblastx!!blastp
+|-
+|1||1.00||-||-
+|-
+|2||1.60||267||-
+|-
+|4||2.80|| ||-
+|-
+|8||4.42||-||-
+|-
+|16||6.71||-||-
+|}
+== With boost and python Libraries ==
+I read online that boost libraries might increase the efficiency. So, compiled the code using boost to see if there is any performance improvement.
+<source lang=make>
+module load boost
+./configure --with-bin-release --without-debug --with-mt --with-boost=/apps/boost/1.53.0
+</source>
+{| border= 3 align="Center" style="text-align: center;"
+!Server!!with<br>boost!!without<br>boost
+|-
+|Intel||70||67
+|-
+|AMD||125||126
+|}
+I tried python libraries as well
+<source lang=make>
+module load python
+./configure --with-bin-release --without-debug --with-mt --with-python=/apps/python/2.7.3
+</source>
+The table below depicts the performance:
+{| border= 3 align="Center" style="text-align: center;"
+!Server!!with<br>python!!without<br>python
+|-
+|Intel||70||67
+|-
+|AMD||126||126
+|}
+None of these libraries seem to improve the performance of BLAST.
+== Profiling ==
+For the blastx executable, we found-
+  %   cumulative   self              self     total
+ time   seconds   seconds    calls   s/call   s/call  name
+.33    206.29   206.29  6838800     0.00     0.00  s_BlastAaWordFinder_TwoHit
+.73    281.95    75.66 12644388     0.00     0.00  s_BlastSmallAaScanSubject
+.13    329.45    47.50 801659273    0.00     0.00  BSearchContextInfo
+.16    360.00    30.55 800757705    0.00     0.00  s_BlastAaExtendLeft
+.90    380.92    20.92 800757705    0.00     0.00  s_BlastAaExtendTwoHit
+.47    391.47    10.55 2311127628   0.00     0.00  ComputeTableIndexIncremental
+.77    399.01     7.54    48008     0.00     0.00  BlastKarlinLHtoK
+.43    405.12     6.12 211437430    0.00     0.00  s_BlastAaExtendRight
+.19    410.21     5.09  1835792     0.00     0.00  Blast_SemiGappedAlign
+In the "s_BlastAaWordFinder_TwoHit" subroutine, we have
+ index % time    self  children    called     name
+.29  191.90 6838800/6838800     BlastAaWordFinder [9]
+ [10]    93.3  206.29  191.90 6838800             s_BlastAaWordFinder_TwoHit [10]
+.66   11.13 12644388/12644388   s_BlastSmallAaScanSubject [15]
+.92   36.67 800757705/800757705 s_BlastAaExtendTwoHit [16]
+.44    0.00 800757705/801659273 BSearchContextInfo [17]
+.08    0.00 6838800/6838800     Blast_UngappedStatsUpdate [194]
+.00    0.01  901568/901568      BlastSaveInitHsp [880]
+.01    0.00 6838800/6838800     Blast_ExtendWordExit [1357]
+It seems that the blastx excutable uses mostly inside routines, not any library routines such as FFT.
+== Shared vs Exclusive run on AMD servers (4 x 6378 @ 2.4 GHz) ==
+We descirbe the effect of shared FPU and L2-cache of the AMD server.
+The results are summarized in the following table '''(# processes=8)''':
+{| border=3  align="Center" style="text-align: center;"
+!Run Scheme!!blastx
+|-
+|Shared<br> time(s)||127
+|-
+|Exclusive<br>time (s)||112
+|}
+In the above table, "shared" represents cores that share resources such as L2-Cache and FPU, while "exclusive" stands for cores which do not share any resources.
+== Performance Comparison ==
+{| border= 3 align="Center" style="text-align: center;"
+!Server!!blastx!!Notes
+|-
+|Intel||67||1
+|-
+|Scaled Intel||92||2
+|-
+|AMD (Shared)||127||1,3
+|-
+|AMD(Exclusive)||112||1,4
+|-
+|AMD Shared/AMD Exc.||1.13||-
+|-
+|AMD Exc./Intel (scaled)||1.22||-
+|-
+|AMD Shared/Intel (scaled)||1.38||-
+|-
+|AMD (16 proc)/<br>Intel(8 proc)||0.90||
 |}
-"AVX" instruction sets are slightly better than all the other ones!
+<sup>1</sup> Intel: E5 2643 @ 3.3 GHz, AMD: Opetron 6378 @ 2.4 GHz<br>
+<sup>2</sup> Scaling was done by the factor of 3.3/2.4=1.375 <br>
+<sup>3</sup> "Shared" represents cores that share resources such as L2-Cache and FPU <br>
+<sup>4</sup> "Exclusive" represents cores that don't share resources such as L2-Cache and FPU
-= QUANTUM ESPRESSO BENCHMARKING =
+<!-- = QUANTUM ESPRESSO =
 Quantum Espresso is a plane wave density functional theory code used for the electronic structure calculations of materials.
@@ Line 499: / Line 2,005: @@
 Following table demonstrates the scaling of the code with number of processors:
-{| border=3 style="text-align: center;"
+{| border=3 align="Center" style="text-align: center;"
 ! 8<br>processors!! 4 proc<br> numanode=0!! 4 proc<br> numanode=0,1
 |-
@@ Line 507: / Line 2,013: @@
 From our experience with VASP as well as profiling we know that the code spends most of its time in FFT libraries. Following table captures result of variation of FFT libraries:
-{| border=3 style="text-align: center;"
+{| border=3 align="Center" style="text-align: center;"
 !FFTW-FFT!!MKL-FFT
 |-
@@ Line 515: / Line 2,021: @@
 ==AMD (2 x 6220 @ 3.0 GHz)==
-{| border=3 style="text-align: center;"
+{| border=3 align="Center" style="text-align: center;"
 ! 16<br>processors!! 8 proc<br> Non-shared!! 8 proc<br> Shared
 |-
@@ Line 521: / Line 2,027: @@
 |}
-{| border=3 style="text-align: center;"
+{| border=3 align="Center" style="text-align: center;"
 !FFTW-FFT!!MKL-FFT
 |-
 |250||232
+|}
+ -->
+=Compilation Table=
+This table instructs number of different compiler options that can be used to build the code.
+{| border= 3 align="Center" style="text-align: center;"
+!Package!!Intel!!GNU!!Open64
+|-
+|VASP ||Y||-||N
+|-
+|LAMMPS||Y||Y||Y
+|-
+|GROMACS||Y||Y||Y
+<!-- |-
+|QE||Y||-||- -->
+|-
+|DL_POLY||Y||Y||Y
+|-
+|BLAST||Y||Y||N
 |}

Difference between revisions of "User:Manoj"

Latest revision as of 08:47, 25 July 2013

STREAM

A few words about numactl

Intel (2 x E5-2643 @ 3.30GHz)

AMD (2 x 6220 @ 3.0 GHz)

AMD (4 x 6378 @ 2.4 GHz)

Bandwidth in terms of Socket

VASP

Intel (2 x E5-2643 @ 3.30GHz)

Native FFT Library

MKL FFTs (via FFTW wrappers)

FFTW FFTs

AMD (2 x 6220 @ 3.0 GHz)

Performance Comparison

LAMMPS

Scaling with Number of Processors

Comparison of Intel, Open64 and GNU Builds

Intel (2 x E5-2643 @ 3.30GHz)

Intel Compiler and SIMD Sets

MKL vs FFTW FFTs

AMD (4 x 6378 @ 2.4 GHz)

Performance Comparison

GROMACS

Comparison of Intel, Open64 and GNU Builds

Scaling with Number of Processors

Instruction Set Dependence

MKL vs FFTW

Shared vs Exclusive run on AMD servers (4 x 6378 @ 2.4 GHz)

Performance Comparison

DL_POLY

Comparison of Intel, Open64 and GNU Builds

More studies on Test 14

Scaling with Number of Processors

MKL vs FFTW FFTs

Shared vs Exclusive run on AMD servers (4 x 6378 @ 2.4 GHz)

Performance Comparison

BLAST

Comparison of Intel, Open64 and GNU Builds

Scaling

With boost and python Libraries

Profiling

Shared vs Exclusive run on AMD servers (4 x 6378 @ 2.4 GHz)

Performance Comparison

Compilation Table

Navigation menu

Search