View source for Delft3D Configuration

If you are interested in installing Delft3D locally to accommodate custom changes to the Delft3D 
base source, you may use the following procedure. 

Currently, Delft3D can be successfully installed only with the Intel suite of compilers. GCC installation requires 
extensive changes to source code to make it adhere to F90 standard (GCC compiler suite expects strict adherence to the
standard). 

The outline given below is tested on HPG. However, please refer to https://oss.deltares.nl/web/delft3d/get-started for details.

Clone the repository: svn checkout https://svn.oss.deltares.nl/repos/delft3d/tags/delft3d4/142586 delft3d_repository
(The number 142586 is the commit. The current version of delft3D is 4.06.01 (svn checkout https://svn.oss.deltares.nl/repos/delft3d/tags/delft3d4/142586 delft3d_repository) Note: svn is accessible on HPG by module load ubuntu 

Set up the installation environment (as of 04/17/2004)

a) module load intel/2020.0.166 openmpi/4.1.5 netcdf-c/4.9.2 netcdf-f/4.6.1 metis/5.2.1  cmake/3.26.4  petsc/3.19.4

b) Initialize the following variables. 
        export NETCDF_CFLAGS="-I/apps/intel/2020.0.166/openmpi/4.1.5/netcdf-c/4.9.2/include\
                              -I/apps/intel/2020.0.166/openmpi/4.1.5/netcdf-f/4.6.1/include"

 
       export NETCDF_LIBS="-L/apps/intel/2020.0.166/openmpi/4.1.5/netcdf-c/4.9.2/lib64 -lnetcdf \
                    -L/apps/intel/2020.0.166/openmpi/4.1.5/netcdf-f/4.6.1/lib - lnetcdff"

       export PETSc_CFLAGS="-I/apps/intel/2020.0.166/openmpi/4.1.5/petsc/3.19.4/include"
       export PETSc_LIBS="-I/apps/intel/2020.0.166/openmpi/4.1.5/petsc/3.19.4/lib"

       export METIS_PARTMESHDUAL="-L/apps/intel/2020.0.166/metis/5.2.1/lib/ -lmetis"
       export METIS_CFLAGS="-I/apps/intel/2020.0.166/metis/5.2.1/include/"

c) 
       cd src 
       ./autogen.sh
        cd third_party_open/kdtree2
       ./autogen.sh
        cd ../..
d) Configure for HPG
       ./configure prefix=/apps/intel/2020.0.166/openmpi/4.1.5/delft3d/4.6.1 \
       --with-mpi --with-netcdf --enable-shared \
       --with-petsc
       make ds-install

The installation prefix shown above is for the HPG and you are required to use your custom installation prefix. 
If successful, bin, lib, and share directories will be installed in your installation prefix. 
Setup the local module environment as described in https://help.rc.ufl.edu/doc/Modules